I have a macro procedure that runs when doubleClick. This procedure is writen on the Sheet code under the "Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Excel.Range, Cancel As Boolean)".
I realize that when there is a dropBox, the procedure does not start. It drops the dropBox menu instead of running the Macro.
Is there any way to make the procedure run even when doubleclicking on DropBoxes?
I am a Coach who will be using this data table to call pitches via a catcher's wristband. The band is obviously completed below; however, I need to create a separate sheet where the numbers correlate to the pitches that are being called. How it works: everything in the table(s) with a dash is a pitch i.e. 2-1, 1-3, 1-U, etc. The numbers on the columns and row are what is relayed to the catcher to call the corresponding pitch. For example, I would signal is 113 (first number = row second number = column). 113 is 4-1. I need a way/ formula to where I can see which numbers are to be relayed in for each pitch. It would possible look like 2-1: 101, 411, 422, 501, etc.
View 5 Replies View RelatedI have a table with a lot of variables and i need to extract some of the values of that are conditionated by 5 variables and put them in a drop box. How can I do that???
The first picture is a part of my "help table" and the second is the table that i want to fill.
In yellow are the problems...
first.jpg
second.jpg
I have a drop down box in "U2" which is pulling a date. 31/01/2014, 28/02/2014 and so on..
In "S6:AD6" I have the same dates. I want to be able to, in "AE16" have a sum from anything before or equal to the figure in "U2".
I have a dropbox located on a sheet which other information needs to remain protected.
How do we give access to users to the dropbox while the remainder of the sheet is protected?
I have a number of files organised in a number of folders on Dropbox. I create a macro to enable me to be able to navigate to a particular folder and then get a list of all the files in that folder to be placed within certain cells on the spreadsheet I'm working with in Excel.
View 2 Replies View RelatedFFLX9g.jpg
What I'm after is an easier way to get data combined without having to type it all out. If you look above I would like to have A-C actually as dropbox's or listbox's, something I can click, then drop down to the proper name and select it. Then on E I'd like a timestamp for when this action was done with the date and time as shown along with the reason. Then in F I'd like the Name fields combined so I just need to right-click on F and copy/paste into the other program I use.
Maybe one column can just be the names of everyone with a selection box and I click this stuff then when I am done it resets?
The thing is I can open ie explorer and navigate to the page I need. What I'd like to do is be able to select from a drop box on the web page when it's already open is this at all possible.
View 1 Replies View RelatedI have several cells with data validation's drop Box. Every data validation uses a range name as source (myColorList). Here goes the hard part: I need a new value inside the dropBox list, but The problem is that I can NOT modify the "myColorList" range.
-- Is there any way to build up the dropbox source using the range name and the new value? Something like
It's quite easy, I am trying to do a droplist (that's easy) but I want that drop list to take infos on 2 different columns and fill the 2 columns I want in the main sheet (see attachment)
On tab 'dealers' I have dealers name and account numbers. On tab 'Mileage' I have a cell call "NAME' and a cell call 'Accnt #/NB'. Here is what I want to do:
On sheet 'Mileage' I want to choose from a drop list a dealer name and I want Excel to populate the cell "Accnt#/NB" automatically by chosing the account number that is appropriate to the dealer choosen which is column 'B' in the dealers tab.
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies View RelatedIn a project i am compiling i need to work accurately with times to calculate the work progress of the people in the workshop thus....here goes....
I have in work book #1 (7) sheets mon to fri + complete week + a sheet where all job numbers are collected.
From monday to friday the workmen log their times as a start time and a end time. This has to be then calculated to a total hours:mins spent per job, wich in turn then has to be calculated to a total hours:mins spent per day. And the on the complete week sheet recalculated as a total time worked per week.
i have a made a macro that copies info to a new sheet now that is working great but if i change the name of the work book it wont work any more so i need the macro to work with what ever name i give the workbook
the current name is
AVERAGE PRICE (update 2009) Mimmos Armico 170809.xls
i have attached the code in notepad ...
In column J, Cad Hrs. How to make to display (0), instead of (-0,02) when I just do other work than Cad Work? I need to separate type of work according to price hour, overtime, and so on.
View 2 Replies View RelatedI have a range of cells in a work sheet "sheet 1 " my objective is to filter this range according to certain criteria (i ve succeeded to do this ) yet what i want to do now is copy this data to another existing worksheet in a certain range .
note :the existing worksheet to which i 'll copy the filtered data has some cells out of the range that i dont want to over write ..
Simply :how to copy a selected range of cells in a work sheet to already existing work sheet in a specific range aswell .
I am want to copy a formula across several work sheet and have the formula always take data from previous work sheet.
2) I am working with this formula =C12+INDIRECT((MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)-1)&"!"&"C12")
and it comes from this thread http://www.excelforum.com/excel-gene...orksheets.html. I have included a worksheet attachment that has explanations
Following code has 2 IF statements , the code runs the way it is and the first IF works perfectly, but the second IF does not work.
View 3 Replies View Relatedscreenshot.jpg
Ok, so from the attached picture (screenshot.jpg), you will see a data export of staff losses.
On the table to the right, i need cell G2 to take the ID from cell F2 and then search column A and add up every time there is negative number in column B.
So if staff ID has -15 , -15, -10 and -10 in the first table, their summary on the right table will show -50
(PS, i know it says AVERAGE LOSS) but i just need it to be the total. So basically, from the loss log on the left, it just counts the total losses occurred by each individual staff member on the summary table to the right.
Is there any way that Tab should automatically jump to next column, after the entry has been made.
I have only one number (one digit) per column. I wish that when I enter the digit the tab should go automatically to next column. And also if it is possible that tab may miss the blank column and go to the next where the entry is to be made.
I would like someone to explain the reason why when the program is run, the maximum value in column S successfully is selected by being colored in pink, but the minimum in column R between those pink max's (indicated by the entire row outlined in red) is not the minimum.
In other words, look at the numbers in column R. Only the 14.08 rows are supposed to be boxed in red. I can't understand why the 30.08 and the 46.08 are boxed in red??? And puzzling to me is why the 46.08 near the top are boxed, yet the 46.08 near the bottom are not boxed.
I normally use the WORKDAY function in order to create an involved scheduling
program. However, I have no idea how to create a formula that would count
Saturdays as a workday. I usually type in one date and then the dates kick
out to an end date several months later. How do I create a formula to
include Saturdays on a daily projection (e.g. A1=8/12/06, A2=8/14/06,
A3=8/15/06,etc...)?
IF statement does not work?I have a chart on my sheet like so: (it gives me rates of pay)
View 3 Replies View Relatedi want to link one cell to another sheet if that cell is not blank. in other words if A2 says Decor, then I want to have the data on Sheet1 in A2 link to Sheet2 and say Decor. i thought i was clever and in the cell i wanted the link to go i wrote
=IF(Sheet1!A2>"",Sheet1!A2)
but it didn't work....
I have some user defined function in an .xlam file that works.
Right now since that .xlam file doesn't auto open. I have a button on specific workbooks that will open that xlam so all the udfs work.
Is there a way to embed the udfs into a specific workbook so that workbook is a standalone without the need for opening a separate xlam file?
I get the following sent to me on a daily basis and I would like to format it so that I can utilize it.
I get this:
GROFKCTotalCalls:3
TotalOrders:0
808-5600Calls:3
UNI1Orders:0
GROHJBTotalCalls:436
TotalOrders:75
3-Nov644-6200Calls:225
UNI1Orders:42
3-Nov646-7979Calls:76
UNI2Orders:15
3-Nov700-2900Calls:89
UNI4Orders:12
What I need is this:
Phone Calls Orders
808-5600 3 0
644-6200 225 42
646-7979 76 15
700-2900 89 12
How would you work with the data I get to produce what I need??? I know a macro can format the data, but maybe there is something else I can utilize that I'm not aware of.
I have the following:
Private Sub TextBox1_AfterUpdate()
'//Check for valid date
If Not IsDate(TextBox1) Then
Me.TextBox1 = ""
'Show SplashForm2 if not date
SplashForm2.Show
Me.TextBox1.SetFocus
End If
End Sub
I thought this was working but I put 22/07 in TextBox1 and stepping through it it goes from the "If Not statement" to the "End If"
Don't know why it is not recognizing that it is not a date. It is missing the back slash.
I wrote a little macro and put in into presonal workbook. I cant seem to get the short cut to work. When I got into " Tools > Macro > Macros > Options" and put in a letter that I want to use for short cut it does not work.
I am trying to run this macro in another workbook.
i need to work out employee turnover in excel has anyone got any useful tips?
i have a spread sheet with start and end dates so i need to work out who was in the company etc
To run a macro from the first tab of the workbook but have it do it work on another tab.
In the workbook in question I have a tab called "input" were certain information in updated and is linked or used in formulas on other tabs. Some of the tabs have macros that do various functions. I would like to set up one macro button on the "input" tab that would run the macros on the other tabs instead of having to run each one individually from its own tab.
Below is on of the macros that I would like to run from the "input" tab and have it update the "AP Accrual" tab
Sub CopyPriorMonthAccruals()
ActiveCell.FormulaR1C1 = "=EOMONTH(Input!R[5]C,-1)"
Columns("L:L").Select
Selection.Copy
Columns("Y:Y").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
Range("B3").Select
ActiveCell.FormulaR1C1 = "=EOMONTH(Input!R[5]C,0)"................................
I recently took a macros my friend did and adjusted it so it would work for my problem.
It works fine but there is one thing i don't understand about it.
The initial problem was that i needed a macros that could copy a range and paste it 1 cell space to the left and then delete the last cell of that range, so it would look something like this:
FROM THIS:
HIJKLM2NIVEL
3
21
TO THIS:
HIJKLM2NIVEL3
21
so this is the macros i am using which works perfectly:
Range("H1").Select
Selection.End(xlDown).Select
Selection.Offset(0, 2).Select
RC = Cells(Columns.Count, ActiveCell.Row).End(xlUp).Column
Range(ActiveCell, Cells(RC, ActiveCell.Row + 11)).Select
Selection.Copy
ActiveCell.Offset(0, -1).Select
ActiveSheet.Paste
ActiveCell.Offset(0, 4).Select
Selection.ClearContents
What i don't understand is why i have to use the +11 in order for it to move 4 spaces to the right.