Look For / Add Up And Work Out Average Of Value
Dec 20, 2013
screenshot.jpg
Ok, so from the attached picture (screenshot.jpg), you will see a data export of staff losses.
On the table to the right, i need cell G2 to take the ID from cell F2 and then search column A and add up every time there is negative number in column B.
So if staff ID has -15 , -15, -10 and -10 in the first table, their summary on the right table will show -50
(PS, i know it says AVERAGE LOSS) but i just need it to be the total. So basically, from the loss log on the left, it just counts the total losses occurred by each individual staff member on the summary table to the right.
View 2 Replies
ADVERTISEMENT
Dec 28, 2007
This formula is returning 0.2578 when it should return 2.473
{=AVERAGE(('Data-Design'!E2:E6000)*('Data-Design'!Q2:Q6000=1))}
What am I not understanding?
I want the average of column E when column Q=1
View 9 Replies
View Related
Jan 11, 2009
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies
View Related
Mar 3, 2009
In a project i am compiling i need to work accurately with times to calculate the work progress of the people in the workshop thus....here goes....
I have in work book #1 (7) sheets mon to fri + complete week + a sheet where all job numbers are collected.
From monday to friday the workmen log their times as a start time and a end time. This has to be then calculated to a total hours:mins spent per job, wich in turn then has to be calculated to a total hours:mins spent per day. And the on the complete week sheet recalculated as a total time worked per week.
View 9 Replies
View Related
Aug 24, 2009
i have a made a macro that copies info to a new sheet now that is working great but if i change the name of the work book it wont work any more so i need the macro to work with what ever name i give the workbook
the current name is
AVERAGE PRICE (update 2009) Mimmos Armico 170809.xls
i have attached the code in notepad ...
View 8 Replies
View Related
Feb 13, 2010
In column J, Cad Hrs. How to make to display (0), instead of (-0,02) when I just do other work than Cad Work? I need to separate type of work according to price hour, overtime, and so on.
View 2 Replies
View Related
Jun 14, 2013
E11 through E24 contains numbers and a few errors (#N/A) that need to persist (the errors need to show).
E10 needs to show the average of the numbers that are in E11 through E24, and just ignore the errors.
I have many columns like that - where the errors need to show and I need to show an average of the number/values that do appear, ignoring the errors.
View 14 Replies
View Related
Dec 29, 2009
I have a range of cells in a work sheet "sheet 1 " my objective is to filter this range according to certain criteria (i ve succeeded to do this ) yet what i want to do now is copy this data to another existing worksheet in a certain range .
note :the existing worksheet to which i 'll copy the filtered data has some cells out of the range that i dont want to over write ..
Simply :how to copy a selected range of cells in a work sheet to already existing work sheet in a specific range aswell .
View 9 Replies
View Related
Dec 9, 2008
i have two columns...a and b (a w/ names, and b w/grades). then i have the table lookup with names and grades all mixed up for many rows. i want to be able to average the grades with appropriate names.
=average(vlookup(name, table, column, false))?? i don't get it to work and how can i specify the grade to average?
View 5 Replies
View Related
Jan 23, 2007
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
View 3 Replies
View Related
May 23, 2014
Can I get a minimum average and a maximum average, I have a worksheet with days of supply for 100 stores with about 100-200 products each, the dos resides in column D.
I was going to create a summary page and reference column d.
The following just gives me the min, I want the min average if possible:
View 5 Replies
View Related
Sep 1, 2006
I am attempting to calculate Grade point averages for my students for all classes. There are 5 columns of grades to be considered. I frist assign values of 0-5 to the grades then average the points. My problem is that I want the AVERAGE to ignore the zero but it calculates it as well. (I enter a 0 if I have no grade for that class.) I have tried the{ } to make it an array formula but this also did not work. Here is what I have, can anyone help?
=SUM(AVERAGE(IF(AND(L2>89,L2<100),5,IF(AND(L2<90,L2>79),4,IF(AND(L2>69,L2<80),3,IF(AND(L2<70,L2>59), 2,IF(AND(L2>0,L2<60),1,0))))),IF(AND(T2>89,T2<100),5,IF(AND(T2<90,T2>79),4,IF(AND(T2>69,T2<80),3,IF( AND(T2<70,T2>59),2,IF(AND(T2>0,T2<60),1,0))))),IF(AND(AB2>89,AB2<100),5,IF(AND(AB2<90,AB2>79),4,IF(A ND(AB2>69,AB2<80),3,IF(AND(AB2<70,AB2>59),2,IF(AND(AB2>0,AB2<60),1,0))))),IF(AND(AJ2>89,AJ2<100),5,I F(AND(AJ2<90,AJ2>79),4,IF(AND(AJ2>69,AJ2<80),3,IF(AND(AJ2<70,AJ2>59),2,IF(AND(AJ2>0,AJ2<60),1,0))))) ,IF(AND(AR2>89,AR2<100),5,IF(AND(AR2<90,AR2>79),4,IF(AND(AR2>69,AR2<80),3,IF(AND(AR2<70,AR2>59),2,IF (AND(AR2>0,AR2<60),1,0)))))),-1)
I know it is huge. The syntax is correct. It calculates the average, but always for all 5 columns. It will not ignore a 0 in a column.
View 10 Replies
View Related
Jan 7, 2008
I'm using the formula =AVERAGE(B16:L16) to give me the average.
However I have a couple of problems with this. Firstly I would like to exclude the value zero from the average. Secondly to also ignore the lowest and highest values.
Example, if the values in the cells are 0,1,2,3,4,5,6,7,8,9,10 then the current result shows 5, by ignoring the 0 and lowest value 1 and highest value 10 the average should be 4.5.
View 9 Replies
View Related
Oct 11, 2006
Ok, I for some reason just cant wrap my head around this. I need to to get the average time per call of two rows, but they are based on how many calls taken.
so in one column i have 50168 calls taken at 4:21 seconds per call. and in the next row i have 597 calls taken at 5:20 per call. I need to see what the new average will be with them combined, and I need it to display in m:ss form.
View 9 Replies
View Related
Jan 2, 2009
I am want to copy a formula across several work sheet and have the formula always take data from previous work sheet.
2) I am working with this formula =C12+INDIRECT((MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)-1)&"!"&"C12")
and it comes from this thread http://www.excelforum.com/excel-gene...orksheets.html. I have included a worksheet attachment that has explanations
View 2 Replies
View Related
Aug 13, 2008
to formulate Excel formulas to obtain the average buy price and average sell price for me to do this futures trading. Thanks a lot. I downloaded the Htmlmaker to post the spreadsheet here to show the manual way to calcualte the average buy price and average sell price but when it is on html form, i clicked on the 'Please click this button to send the source into clipboard' button & then i paste into this thread. Is the way to make my spreadsheet appear here correct cause it cannot work.
View 9 Replies
View Related
Feb 1, 2009
Following code has 2 IF statements , the code runs the way it is and the first IF works perfectly, but the second IF does not work.
View 3 Replies
View Related
Nov 16, 2008
Is there any way that Tab should automatically jump to next column, after the entry has been made.
I have only one number (one digit) per column. I wish that when I enter the digit the tab should go automatically to next column. And also if it is possible that tab may miss the blank column and go to the next where the entry is to be made.
View 7 Replies
View Related
Dec 4, 2009
I would like someone to explain the reason why when the program is run, the maximum value in column S successfully is selected by being colored in pink, but the minimum in column R between those pink max's (indicated by the entire row outlined in red) is not the minimum.
In other words, look at the numbers in column R. Only the 14.08 rows are supposed to be boxed in red. I can't understand why the 30.08 and the 46.08 are boxed in red??? And puzzling to me is why the 46.08 near the top are boxed, yet the 46.08 near the bottom are not boxed.
View 7 Replies
View Related
Aug 10, 2006
I normally use the WORKDAY function in order to create an involved scheduling
program. However, I have no idea how to create a formula that would count
Saturdays as a workday. I usually type in one date and then the dates kick
out to an end date several months later. How do I create a formula to
include Saturdays on a daily projection (e.g. A1=8/12/06, A2=8/14/06,
A3=8/15/06,etc...)?
View 9 Replies
View Related
Nov 5, 2008
IF statement does not work?I have a chart on my sheet like so: (it gives me rates of pay)
View 3 Replies
View Related
Jan 5, 2012
i want to link one cell to another sheet if that cell is not blank. in other words if A2 says Decor, then I want to have the data on Sheet1 in A2 link to Sheet2 and say Decor. i thought i was clever and in the cell i wanted the link to go i wrote
=IF(Sheet1!A2>"",Sheet1!A2)
but it didn't work....
View 7 Replies
View Related
Jul 23, 2013
I have some user defined function in an .xlam file that works.
Right now since that .xlam file doesn't auto open. I have a button on specific workbooks that will open that xlam so all the udfs work.
Is there a way to embed the udfs into a specific workbook so that workbook is a standalone without the need for opening a separate xlam file?
View 7 Replies
View Related
Nov 15, 2006
I get the following sent to me on a daily basis and I would like to format it so that I can utilize it.
I get this:
GROFKCTotalCalls:3
TotalOrders:0
808-5600Calls:3
UNI1Orders:0
GROHJBTotalCalls:436
TotalOrders:75
3-Nov644-6200Calls:225
UNI1Orders:42
3-Nov646-7979Calls:76
UNI2Orders:15
3-Nov700-2900Calls:89
UNI4Orders:12
What I need is this:
Phone Calls Orders
808-5600 3 0
644-6200 225 42
646-7979 76 15
700-2900 89 12
How would you work with the data I get to produce what I need??? I know a macro can format the data, but maybe there is something else I can utilize that I'm not aware of.
View 9 Replies
View Related
Apr 15, 2007
I have the following:
Private Sub TextBox1_AfterUpdate()
'//Check for valid date
If Not IsDate(TextBox1) Then
Me.TextBox1 = ""
'Show SplashForm2 if not date
SplashForm2.Show
Me.TextBox1.SetFocus
End If
End Sub
I thought this was working but I put 22/07 in TextBox1 and stepping through it it goes from the "If Not statement" to the "End If"
Don't know why it is not recognizing that it is not a date. It is missing the back slash.
View 9 Replies
View Related
Jul 28, 2008
I wrote a little macro and put in into presonal workbook. I cant seem to get the short cut to work. When I got into " Tools > Macro > Macros > Options" and put in a letter that I want to use for short cut it does not work.
I am trying to run this macro in another workbook.
View 9 Replies
View Related
Nov 19, 2008
i need to work out employee turnover in excel has anyone got any useful tips?
i have a spread sheet with start and end dates so i need to work out who was in the company etc
View 9 Replies
View Related
Feb 4, 2009
To run a macro from the first tab of the workbook but have it do it work on another tab.
In the workbook in question I have a tab called "input" were certain information in updated and is linked or used in formulas on other tabs. Some of the tabs have macros that do various functions. I would like to set up one macro button on the "input" tab that would run the macros on the other tabs instead of having to run each one individually from its own tab.
Below is on of the macros that I would like to run from the "input" tab and have it update the "AP Accrual" tab
Sub CopyPriorMonthAccruals()
ActiveCell.FormulaR1C1 = "=EOMONTH(Input!R[5]C,-1)"
Columns("L:L").Select
Selection.Copy
Columns("Y:Y").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
Range("B3").Select
ActiveCell.FormulaR1C1 = "=EOMONTH(Input!R[5]C,0)"................................
View 9 Replies
View Related
Oct 23, 2009
I recently took a macros my friend did and adjusted it so it would work for my problem.
It works fine but there is one thing i don't understand about it.
The initial problem was that i needed a macros that could copy a range and paste it 1 cell space to the left and then delete the last cell of that range, so it would look something like this:
FROM THIS:
HIJKLM2NIVEL
3
21
TO THIS:
HIJKLM2NIVEL3
21
so this is the macros i am using which works perfectly:
Range("H1").Select
Selection.End(xlDown).Select
Selection.Offset(0, 2).Select
RC = Cells(Columns.Count, ActiveCell.Row).End(xlUp).Column
Range(ActiveCell, Cells(RC, ActiveCell.Row + 11)).Select
Selection.Copy
ActiveCell.Offset(0, -1).Select
ActiveSheet.Paste
ActiveCell.Offset(0, 4).Select
Selection.ClearContents
What i don't understand is why i have to use the +11 in order for it to move 4 spaces to the right.
View 9 Replies
View Related
Jun 2, 2006
I have created an Add-In and hard-coded the file name assuming that it will be used with a specific file called, let's say, Data_Approval_Project.xls (where Project would change for a praticular Project name, e.g. Data_Approval_Alpha1.xls,
Data_Approval_Beta1.xls). Then I would just need to manually change the path and the file name in the Add-In for a specific user group.
Now I am presented with the case of a " Multiple Project - One User", where the same user will have to work on Alpha1 and Beta1 projects using the same Add-In (which actually accounted only for one of the projects). Is there any easy way to get this fixed?
I was thinking about adding an Input box, asking which project user wants to work on, then write the answer somewhere in the workbook, and find and open the file using something like the "Data_Approval_" & the reply of the input box string command.
View 9 Replies
View Related
