In column J, Cad Hrs. How to make to display (0), instead of (-0,02) when I just do other work than Cad Work? I need to separate type of work according to price hour, overtime, and so on.
View 2 Replies
i need to work out a formula for my spreadsheet which I use to work out cutting lists for timber frames. I need it to work out if the width of a job is for eg 2400mm i need to work out how many timber studs I need so the space between each stud is between 400mm and 500mm and this will need to work for a range of different sizes of frames. I have it written at the moment and it just devides the width by 400 and gives me a amount of studs but it would work much better if it could space them between 400 & 500.
View 4 Replies View RelatedIn a project i am compiling i need to work accurately with times to calculate the work progress of the people in the workshop thus....here goes....
I have in work book #1 (7) sheets mon to fri + complete week + a sheet where all job numbers are collected.
From monday to friday the workmen log their times as a start time and a end time. This has to be then calculated to a total hours:mins spent per job, wich in turn then has to be calculated to a total hours:mins spent per day. And the on the complete week sheet recalculated as a total time worked per week.
I've got a PDF file that I was hoping to convert into an Excel sheet, but it doesn't look like that's possible, xince I'm working with only Adobe Reader, not Acrobat. Anyway, I need to compare 1 column of this report to another report that IS in Excel. Is there a way to have a macro compare an Excel file with a PDF??
View 2 Replies View RelatedThe following formula gives me the error message #REF!
=INDEX(INDIRECT("R7"),MATCH(V6,D8:D11,1),11)
The problem I believe is in the INDIRECT("R7") as the following formula works
=INDEX(Well_AA_09,MATCH(V6,D8:D11),1),11)
The content of cell R7 is the text Well_AA_09 which is the name of a dynamic range I have created and pasted from within VBA into cell R7.
I have a fairly simple macro (below). I want it to do one more thing.....not run if the filters have not been changed. I would like to prevent the error that occurs if someone tries to run it and there are no filters active.
Private Sub AutoFilter_Remove()
Sheets("Data").Select
ActiveSheet.Unprotect "password"
ActiveSheet.ShowAllData
[Code].....
I've developed a spreadsheet that shows what errors people made in their spreadsheets. I compare cell A1 in spreadsheet 1 (original) against cell A1 in spreadsheet 2 (final), in spreadsheet 3. Spreadsheet 3 shows a "-" if the cell they wrote was OK, and shows the new, correct value if they made an error, as follows:
=IF('Final'!A5='Original'!A5, "-",'Final'!A5)
The problem is, this only works if I take the original spreadsheets, which contain formulae in each cell, and paste them into a new spreadsheet using paste values.
Is it possible for the IF function to search the formula in a cell, and not the value?
if i enter a value in 1 cell and want it to increase by a percentage how can this be done without having a sum column etc
View 9 Replies View RelatedI'm having some difficulty with this one. I have found several posts on how to make a macro work through several rows, but cannot seem to figure out how to apply it to my macro.
Right now I'm having to write the macro for every line and it's a bear! Here's what I'm working with right now and it's ridiculous (I've actually got through line 51, but I'll only post a few here, for your sanity!)- there has to be a better way:
If Range("C9") = "" Then
Range("T9").Formula = "=IF(K9>I9,IF((I9-H9)>=180,180,(I9-H9)),IF((I9-H9)+(K9-J9)>=180,IF((K9-J9)>=180,0,180-(K9-J9)),(I9-H9)))"
Range("U9").Formula = "=IF(K9<I9,IF((K9-J9)>=180,180,(K9-J9)),IF((I9-H9)+(K9-J9)>=180,IF((I9-H9)>=180,0,180-(I9-H9)),(K9-J9)))"
Else
Range("T9").Formula = "=IF((T8+U8)>=180,0,(IF(K9>I9,IF((I9-H9)>=180,180,(I9-H9)),IF((I9-H9)+(K9-J9)>=180,IF((K9-J9)>=180,0,180-(K9-J9)),(I9-H9)))))"
Range("U9").Formula = "=IF((T8+U8)>=180,0,(IF(K9<I9,IF((K9-J9)>=180,180,(K9-J9)),IF((I9-H9)+(K9-J9)>=180,IF((I9-H9)>=180,0,180-(I9-H9)),(K9-J9)))))"
End If............................
I'm trying to convert some data from MLS to make it easier to work with statistically. The raw data regarding Bath count downloads from MLS in 2 columns; 1 column for Full Baths & 1 column for Half Baths (see Raw Data.jpg). I want to concatenate the baths to one column and, if there is a 1/2 bath, tack ".5" to the end of the full bath count.
The problem with my formula is that if it concatenates the ".5" to the full bath count number, it converts the format to text (see Current Formula.jpg). I know I can go through later and convert it back to number format but is there a formula I could use that would keep it in number format?
I have generated macro, all I want is when this macro runs on different work sheets it should automatically select the active range based upon column A and copy the formula in the inserted new column B, please see the macro which will make it clear. Basically whenever it is copying a value or a formula it should be for the active range.
View 11 Replies View RelatedOR can I? I get a "Run Time Error '1004' Select Method of Worksheet Class Failed"
Is there anyway around this?
Basically all the sheets are hidden from the user except for the Entry sheet. They input there data on there and then they press a send command button which then needs to copy that information to a hidden sheet. This is where the problem occurs.. Thought maybe their was a way around that or do I need to unhide the sheets during the macro and then rehide them again?
Is it possible to make excel template work only on 1 computer by giving any vba password (on lines of license number).
Aim is to ensure it works on only client computer, even if template is shared outside it becomes useless.(We often see clients audit team getting access to templates using it for thier purpose & distributing).
In same spirit what are best practices one can take like protecting formulas with password etc
Our system can create an SLK file showing customer open orders. It is ALWAYS in the exact same format. I created a macro to open this file, manipulate the data (convert text to numbers, convert text date to actual date, and a few other things) and then make a pivot table.
When I try to run it it gets hung up on the pivot table and the debug highlights the BOLD below:
Columns("F:L").Select
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"SOLIST!C6:C12").CreatePivotTable TableDestination:="", TableName:= _
"PivotTable1", DefaultVersion:=xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
The RowField, ColumnField, and Page Fields are correct.
The QTY is the data that goes in the field.
I am working on an easy to read worksheet for my employees. i have a multi-page schedule that i would like to display on one page, i can make this work using the IF function, how ever i would need to display names not the time they work, how to make this work, i have attached and example sheet of sheet 1 and sheet 2. I am trying to take sheet 2 into sheet three to display names, if they are off to display nothing.
View 1 Replies View RelatedSo i got a few macros on a worksheet and one of them is simply :
Sub Pr_Removefilter()
ActiveSheet.ShowAllData
End Sub
Ive worked on the excel a couple of times, everything fine. Then it started crashing upon saving (after changes made that had no possible connection to the macro, on another sheet). After a few painfull trials and errors i located the problem to be this macro button. I erased it, created a new one with the EXACT macro and it works. Why?..
i have a made a macro that copies info to a new sheet now that is working great but if i change the name of the work book it wont work any more so i need the macro to work with what ever name i give the workbook
the current name is
AVERAGE PRICE (update 2009) Mimmos Armico 170809.xls
i have attached the code in notepad ...
I have a range of cells in a work sheet "sheet 1 " my objective is to filter this range according to certain criteria (i ve succeeded to do this ) yet what i want to do now is copy this data to another existing worksheet in a certain range .
note :the existing worksheet to which i 'll copy the filtered data has some cells out of the range that i dont want to over write ..
Simply :how to copy a selected range of cells in a work sheet to already existing work sheet in a specific range aswell .
I have this function that works on line 3 and if the conditions are met, the result is 1
=SUMPRODUCT(--(IfColor(B3,$A$76)*(SUMPRODUCT(--(D3D4)))))
Here how it works, if B3 is the same color as the reference cell $A$76 and D3 is different than D4 then the result is 1
I would like this function to work from line 3 to line 60 and return the total of lines where the conditions are met. I'm thinking of a =COUNTIF function but can't get something to work. If there is a simpler way, it's even better. The IfColor is a function I wrote in VBA,
I am want to copy a formula across several work sheet and have the formula always take data from previous work sheet.
2) I am working with this formula =C12+INDIRECT((MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)-1)&"!"&"C12")
and it comes from this thread http://www.excelforum.com/excel-gene...orksheets.html. I have included a worksheet attachment that has explanations
I have created a very long switch statement, which is too long to be placed in one row in VBA. I have attempted to put a space and underscore at the end of one line and continue the statement on the row below by placing a comma at the start of the second line. VBA will accept my efforts, but when I run the statement in the immediate window, the following error appears.
"Invalid procedure call or argument"
I understand that there are certain rules where I can split a switch statement onto two lines, yet I do not know what they may be.
Following code has 2 IF statements , the code runs the way it is and the first IF works perfectly, but the second IF does not work.
View 3 Replies View Relatedscreenshot.jpg
Ok, so from the attached picture (screenshot.jpg), you will see a data export of staff losses.
On the table to the right, i need cell G2 to take the ID from cell F2 and then search column A and add up every time there is negative number in column B.
So if staff ID has -15 , -15, -10 and -10 in the first table, their summary on the right table will show -50
(PS, i know it says AVERAGE LOSS) but i just need it to be the total. So basically, from the loss log on the left, it just counts the total losses occurred by each individual staff member on the summary table to the right.
Is there any way that Tab should automatically jump to next column, after the entry has been made.
I have only one number (one digit) per column. I wish that when I enter the digit the tab should go automatically to next column. And also if it is possible that tab may miss the blank column and go to the next where the entry is to be made.
I would like someone to explain the reason why when the program is run, the maximum value in column S successfully is selected by being colored in pink, but the minimum in column R between those pink max's (indicated by the entire row outlined in red) is not the minimum.
In other words, look at the numbers in column R. Only the 14.08 rows are supposed to be boxed in red. I can't understand why the 30.08 and the 46.08 are boxed in red??? And puzzling to me is why the 46.08 near the top are boxed, yet the 46.08 near the bottom are not boxed.
I normally use the WORKDAY function in order to create an involved scheduling
program. However, I have no idea how to create a formula that would count
Saturdays as a workday. I usually type in one date and then the dates kick
out to an end date several months later. How do I create a formula to
include Saturdays on a daily projection (e.g. A1=8/12/06, A2=8/14/06,
A3=8/15/06,etc...)?
IF statement does not work?I have a chart on my sheet like so: (it gives me rates of pay)
View 3 Replies View Relatedi want to link one cell to another sheet if that cell is not blank. in other words if A2 says Decor, then I want to have the data on Sheet1 in A2 link to Sheet2 and say Decor. i thought i was clever and in the cell i wanted the link to go i wrote
=IF(Sheet1!A2>"",Sheet1!A2)
but it didn't work....
I have some user defined function in an .xlam file that works.
Right now since that .xlam file doesn't auto open. I have a button on specific workbooks that will open that xlam so all the udfs work.
Is there a way to embed the udfs into a specific workbook so that workbook is a standalone without the need for opening a separate xlam file?
I get the following sent to me on a daily basis and I would like to format it so that I can utilize it.
I get this:
GROFKCTotalCalls:3
TotalOrders:0
808-5600Calls:3
UNI1Orders:0
GROHJBTotalCalls:436
TotalOrders:75
3-Nov644-6200Calls:225
UNI1Orders:42
3-Nov646-7979Calls:76
UNI2Orders:15
3-Nov700-2900Calls:89
UNI4Orders:12
What I need is this:
Phone Calls Orders
808-5600 3 0
644-6200 225 42
646-7979 76 15
700-2900 89 12
How would you work with the data I get to produce what I need??? I know a macro can format the data, but maybe there is something else I can utilize that I'm not aware of.
