I have a drop down box in "U2" which is pulling a date. 31/01/2014, 28/02/2014 and so on..
In "S6:AD6" I have the same dates. I want to be able to, in "AE16" have a sum from anything before or equal to the figure in "U2".
I am a Coach who will be using this data table to call pitches via a catcher's wristband. The band is obviously completed below; however, I need to create a separate sheet where the numbers correlate to the pitches that are being called. How it works: everything in the table(s) with a dash is a pitch i.e. 2-1, 1-3, 1-U, etc. The numbers on the columns and row are what is relayed to the catcher to call the corresponding pitch. For example, I would signal is 113 (first number = row second number = column). 113 is 4-1. I need a way/ formula to where I can see which numbers are to be relayed in for each pitch. It would possible look like 2-1: 101, 411, 422, 501, etc.
View 5 Replies View RelatedI have a table with a lot of variables and i need to extract some of the values of that are conditionated by 5 variables and put them in a drop box. How can I do that???
The first picture is a part of my "help table" and the second is the table that i want to fill.
In yellow are the problems...
first.jpg
second.jpg
I have a macro procedure that runs when doubleClick. This procedure is writen on the Sheet code under the "Private Sub Worksheet_BeforeDoubleClick(ByVal Target As Excel.Range, Cancel As Boolean)".
I realize that when there is a dropBox, the procedure does not start. It drops the dropBox menu instead of running the Macro.
Is there any way to make the procedure run even when doubleclicking on DropBoxes?
I have a dropbox located on a sheet which other information needs to remain protected.
How do we give access to users to the dropbox while the remainder of the sheet is protected?
I have a number of files organised in a number of folders on Dropbox. I create a macro to enable me to be able to navigate to a particular folder and then get a list of all the files in that folder to be placed within certain cells on the spreadsheet I'm working with in Excel.
View 2 Replies View RelatedFFLX9g.jpg
What I'm after is an easier way to get data combined without having to type it all out. If you look above I would like to have A-C actually as dropbox's or listbox's, something I can click, then drop down to the proper name and select it. Then on E I'd like a timestamp for when this action was done with the date and time as shown along with the reason. Then in F I'd like the Name fields combined so I just need to right-click on F and copy/paste into the other program I use.
Maybe one column can just be the names of everyone with a selection box and I click this stuff then when I am done it resets?
The thing is I can open ie explorer and navigate to the page I need. What I'd like to do is be able to select from a drop box on the web page when it's already open is this at all possible.
View 1 Replies View RelatedI have several cells with data validation's drop Box. Every data validation uses a range name as source (myColorList). Here goes the hard part: I need a new value inside the dropBox list, but The problem is that I can NOT modify the "myColorList" range.
-- Is there any way to build up the dropbox source using the range name and the new value? Something like
It's quite easy, I am trying to do a droplist (that's easy) but I want that drop list to take infos on 2 different columns and fill the 2 columns I want in the main sheet (see attachment)
On tab 'dealers' I have dealers name and account numbers. On tab 'Mileage' I have a cell call "NAME' and a cell call 'Accnt #/NB'. Here is what I want to do:
On sheet 'Mileage' I want to choose from a drop list a dealer name and I want Excel to populate the cell "Accnt#/NB" automatically by chosing the account number that is appropriate to the dealer choosen which is column 'B' in the dealers tab.
I'm trying to workout how to take a known initial date a repeating frequency and work out the next due date from today.
Example
Initial Date :- 1st of January 2014
Frequency :- every 5 weeks
Current Date :- 9th of March 2014
Next Due date should be :-12th of March 2014 (if I worked it out correctly from my paper calendar)
I want to use a cell formula to do this for different initial dates and varying frequency periods (the frequency will always be whole weeks i.e. 1,2,3,4,5,6,7,8,8,10)
In column A, I have dates; In column b i have security levels. I have made a table called "Security" it contains to columns, a list of security levels and no of years when each security level is required to be reviewed. the table is setup -
d1 e1
Restricted 5
etc
Example of data
ie.
a1 b1 c1
Restricted 1/06/2012 1/06/2017
What I am looking for is a formula to look up a1 "restricted". then lookup the security table and find "restricted" its value is 5 (years) then add the 5 years to date in b1, but place it in c1.
I am trying to create a calculator which will show start date and end date based on the specific date provided.
EX: column A has January 1, 2013, column B has Wednesday, Column C should have a start date which supposed to be 4 days ago (December 28).
I have a list of ID# (Col A) and dates (Col B). The ID # of reference is Col (F) and today's date (Col G). I need to count how many future dates there are in the list (Col B) that are unique and in the future from today's date.
I'm still fairly new to all these formulas and functions which is why I'm not attempting this in VBA.
I've attached an example work book and I would like the result in H2.
Example Workbook.xlsx
based on user date ranges entered on sheet1, I'm trying to write code that will write each month of the date range on other sheets across the 2nd row. at this point I'm getting "object required" error at "Set DateStart = Cells(2, 6)"
I also want the date format to be mmm-yy (Mar 14) on the sheets even if sheet1 has a different format. I tried using sourcerange instead of DateStart, but that didnt work either.
Code:
Dim projStartDate As Date
Dim projEndDate As Date
Dim DateStart As Date[code]....
I need to compare three cells of random dates shown in Column E, F,& G with Row's H5:AK5, H7:AK7, H9:AK7 (the Dates to these rows is Static on row H3:AK3.) EX: ROW 5 has Start Date, End Date (1) and End Date (2). Compare Cell H3 between Start Date & End Date (1). If H3 falls between or equal to Start and End Date(1) then highlight cell H5. Proceed till AK3 (higlighting only the cells H5:AK5). Then compare cell H3 between or equal to End Date (1) and End Date (2) (higlighting only the cells H5:AK5). Then do the same for ROW 7 and ROW 9.
To make things a bit more difficult I need to have " WK#" in Row 14 (these WK# is on another tab called "Task" of the workbook) needs to be displayed in Row's H4:AK4, H6:AK6, & H8:AK8. EX: Compare Date in D15 between or equal to Start Date & End Date (1) then display Wk# in D14 in H4. Continue till all dates in
D15:Z15 are compared to Start Date & End Date (1) and WK#'s in Row D14:Z14 are inputted if applicable in Row H4:AK4, H6:AK6, H8:AK8. I hope this is not confusing. I can't seem to use the upload option so here is alink to download a jpg of the sheet
I'm trying to combine the hours that a employee worked on a single date, with one of multiple time periods that exist for that employee.
I have two sets of data.
Set 1 (hours)
Employee number, date, hours
12345, 1-2-2014, 6
12345, 1-3-2014, 8
12345, 1-10-2014, 8
Set 2 (periods)
Employee number, start date, end date
12345, 1-1-2014, 4-1-2014
12345, 6-1-2014, 1-2-2014
What I'd like to do is to add the start and end date of Set 2 to Set 1 for every row in Set 1
In above example the result should be like this.
12345, 1-2-2014, 6, 1-1-2014, 4-1-2014
12345, 1-2-2014, 8, 1-1-2014, 4-1-2014
12345, 1-10-2014, 8, 6-1-2014, 1-2-2014
I created a basic excel weekly budget and would like to know how much money I have as of todays date. on the top row I have a date range from Sunday to Saturday, so it looks like this:
09-15 16-22 23-29
with the month manually put in above it.
then below I have income and expenses with a Overall below that, so basically what I want to is see the Overall value based on todays date, not sure how to do this with the weekly range and automatic current date(which is =TODAY() as far as I know) I have attached a photo as a reference.
Budget Picture.jpg
I have a forecast monthly trial balance sheet and an Income Statement Analysis sheet. I am analyzing the Year to Date performance for Dec-2013. I need a formula that will match the income statement line i.e revenues, accounting expenses etc. and then sum horizontally from Jan-2013 to Dec 2013 ( if YTD month' Dec-2013' is greater than or equal to date range then sum horizontally the corresponding income statement lines up to the reporting month).
View 2 Replies View RelatedFuture Date Sample.xlsx
I have attached a spreadsheet with a formula I'm looking for. I tried HLOOKUP, INDEX & MATCH, And others, but I was nowhere near what I needed.
is there a formula that will look at A2 and if the date in that column shows May 5, 2013, then in E2 it enters June 1, 2013? I would like E2 to automatically populate the first of the following month of A2.
View 7 Replies View RelatedI have a report that in column A shows a ship date. These ship dates may be "Previous","Same Day", "Next Day", or "Future".
I need VBA code that will look at the day in column A and determine if it matches the current date on the computer if it does then in column W in the same row I need the string "Same Day".
If its the systems date plus 1 day column W in the same row would state "Next day".
If its the systems date plus 2 or more column W in the same row would state "Future".
If its any date prior than than the current system date then column W in the same row would state "Previous".
What I need to do is that I have electrical tools that get tested on a certain date in Column A. I need Column B to look at column A and determine and display in date format the next quarter when test is due.
Practical example: Extension cord got tested on 04/04/12. The next test needs to be conducted on 01/06/12. If the test is overdue and gets conducted on 02/06/12. The column A will change to 02/06/12 and column B should change to 01/09/12 as a result.
The formula I have got to work is
=DATE(YEAR(F2)+IF(MONTH(F2)>9,1,0),CHOOSE(MONTH(F2),4,4,4,7,7,7,10,10,10,1,1,1,),1)
but this makes the quarter dates as APRIL, JULY AND OCTOBER - they need to be MARCH, JUNE, SEPTEMBER
when I change the formula to
=DATE(YEAR(F2)+IF(MONTH(F2)>9,1,0),CHOOSE(MONTH(F2),3,3,3,6,6,6,9,9,9,1,1,1,),1)
The dates work BUT if the following test is undertaken on 01/03/12 the date in Column B does not change to 01/06/12. Why? How do I get it to work?
I have an 'existing results table' as per my attached sample.
I have had help previously from this forum to create lists of 'sold' stock within date ranges (tax year periods) and these are represented as 'sold list' in my attached sample.
I now need to create a list of 'unsold stock' for each annual tax year end date; i.e. populate my table with items that have been created before the end of the date range and that have not been sold by the end of the date range.
Please can someone show me the formula on my attached sample?
Please see my example in red.
I am working with Excel07 however my attached sample is in Excel03 because I couldn't upload an XLSX file.
I need to create a formula that states a delivery date when the order date is entered in an adjacent column. Items ordered on Monday, Tuesday and Wednesday will be delivered the Friday of the following week, eg. ordered 23rd April 2008, delivered on the 2nd of May 2008. Items ordered on Thursday or Friday will be delivered on a Friday 2 weeks later, eg. ordered on the 24th April, delivered on the 9th of May 2008
View 4 Replies View RelatedI am having a problem which I imagine will be fairly simple to resolve but I can't figure it out!
Cell A1 contains a Date eg (01/01/07)
In Cell A2 I want to write a formula that says: Insert 'Warranty' if the system date is within 365 days of the date in Cell A1.
I need to work out how to get the last (or most recent) Friday date. Suppose today is 14/02/2013, then the previous date is: 08/02/2013. If today is 15/02/2013, then I just want it to be 15/02/2013 as it is Friday.
View 3 Replies View RelatedIn sheet1 I have the following
1. Names (Column A)
2. Date (Column B)
My current list if from A2:B300
I am trying to have a piece of code go through all the records in this list, if any of the dates are within the next 2 weeks (from now()) then copy this record (name, date) and put in sheet2. And loop through all 300 records or possibly additional records.
So i have have a two week period that is established by two dates (a start date "F3"... And an end date "F4")
I have a formula that determine if the "1st" of the month falls within the 13 days preceding the start day. This will notify me that I can the deposit my tenant first check on the start date.
Now that that is known, i would like to create a formula that will establish a second date in that month that will notify me when I can deposit my other renters payment. It will always be two after i deposit the first renters cheque.
I am trying to make a spreadsheet that will calculate how long someone has been working for us but what i need is for the date started to be rounded to the start of the nearest month. (ie. Start Date: Jan. 1 - 15, = Jan 1. and Start Date: Jan.15 - Feb.15 = Feb. 1....). Is there a way to do this? I figure i may have to use some sort of table but i dont know which one to use or how to use it.
View 7 Replies View Related
