I have a document (unfortunately I cannot attach it) in Excel 365 that each time I open it I get the usual prompt that it is calling an external link. As much as i'd love to hide the popup I need to find the link to solve to problem but I'm at a loss.
Simply breaking the links doesn't work for some reason, so I've tried updating the source to reflect the current file. No luck there.
I've searched the workbook for the name of the link in question, searching for all formula for name itself as well as variants of "[" and ".xlms".
I don't see anything in the name manager referencing that external file.
I don't recall if I copied from that particular document, I may have as it was a duplicate file. I tried looking over the cells I believe I copied from it but didn't see the reference.
I've installed Kutools and Bill Manville (MS MVP) FindLink Tool. Both of which says there is no external link.
I've looked at the compatibility checker which basically just says, yes there is an external link but give no insight on how to address.
I've tried a couple of macros, some of which crashed excel, some of which simply said that there was an external link but not how to find it. In my frustration I forgot which one that was but I'm about to try that approach again and look for that code.
Is there a way to specify the filename for an external workbook that can be referenced throughout the spreadsheet? In my case it would be better if I could change the single reference instead of having to change it throughout the entire spreadsheet everytime I needed to use data from a different file.
I've got a field where I enter the current month, from this I derive a file path which is stored in A4.
ie: A1 = '01/11/2011' (UK Date format)
A4 = '\myserverdirectory20111111MyFile.xls'
What I'm trying to achieve is to then have a link in cell A6 that will link to the file in A4. I can specify my cell reference as this will never change, just the file path.
So, if I changed A1 to '01/12/2011' my A4 changes to '\myserverdirectory20111211MyFile.xls'
I'm trying to set A6 to something like ="&$A$A4&"!B1 to get the value of B1 on my referenced sheet.
I currently have a file that is linked to an external workbook that is referencing a certain cell from a certain tab. The below is what Column A & B look like right now. What I'm wanting to know is is there a way to have the formula in Column B automatically reference the name in Column A (which is the tab name in the external workbook) instead of having to manually change the formula when the value in Column A changes?
In other words, I want everything in the external reference formula to remain the same except have the person's name change dynamically...
Mary ='X:Anderson CorporationEmployees[Work Hours]Mary'!$F$42
Joe ='X:Anderson CorporationEmployees[Work Hours]Joe'!$F$42
Frank ='X:Anderson CorporationEmployees[Work Hours]Frank'!$F$42
When I open the master file I want my links to automatically update and open the referenced files without having to open the source document for each value. Can this be done
Say I have Source Workbook X 1, and Destination Workbooks X 4. The Source workbook contains a number of lookup values. I want the lookup values to be maintained in the single Source workbook, and I want this workbook to remain closed when the end users are using their Destination workbooks. It is critical that certain cells in the Destination workbooks have validated data in order for formulas and summarizations to be correct.
I'm happy if the Destination workbooks contain a lookup worksheet (perhaps hidden). In short, I'd like the contents from the Source workbook, Lookups worksheet, to just be replicated "as is" into the Destination workbooks, Lookups worksheet. I then want to do my data validation from that worksheet, which of course is open (data validation appears to only work with open workbooks).
I've investigated the techniques in this link: [URL]
Questions:
1) Are the techniques in that link about the best approach? i.e. an external link plus array formulas?
2) A blank cell in the source workbook (text column but formatted as General) is resulting in a zero in the external link. How can I make the external link exactly match the text as entered in the source workbook?
I have a list of URLs and I wrote a small VBA code to launch them when the user clicks on a button, however, it launches in Internet Explorer. Is there any way to get it to launch in Firefox instead?
Due to the large number of VLOOKUP functions on my page of data whenever I try to save I get the following error codes. Excel cannot complete this task with available resources. Choose less data or close other applications. Unable to save external link values. The problem itself may not be solvable but is there away to prevent these messages from coming up when I save (or when it autosaves?)?
In an Excel sheet i have set up a link to an Access database query (select query) using the Import External Data method. The data is store sales by week, arranged in a pivot table layout (stores as rows, weeks as columns). As time goes by, the database will be updated for new weeks sales, and i would like to refresh the data and the new weeks automatically appear in the Excel sheet, in subsequent columns.
At the moment, the only way i can seem to get this to work is to open up the link in MSQuery and manually select the new weeks from the Access query. i have set the parameters to overwrite cells with new data rather than insert new data. i'm sure there is a way to do this, as it feels like it would be a common thing to want, but i can't seem to find an answer anywhere!
I want to be able to get a value from a specific cell in another workbook, the problem i have is that i want to be able to select what file the active workbook looks for from the start page of my current workbook. For example when i load the workbook i get my startup page ( sheet 1) where i will be able to select what external workbook the active workbook will be linking with, i will then link the active workbook to the value in a specific cell from the selected external workbook. I know to link to another workbook i would use ='[filename]sheet!cell
However i want to be able pull up a 'open file dialog box' which i select a file name which will be used as 'filename' in the formula above.
I have a formula in a cell which is refered to other cell within the same sheet and also to other sheet from other file. say
C1 = A1+B1+data file c1 Data file is another file in other location.
I was trying to break a external reference link (from Data File) from Data _ Edit Link, but it is converting all the formula to value. How is it possible to break only the external link without damaging the formula within the sheet say c1 = A1+B1+26 (value from data file c1)
Basically I want to point my Excel sheet to a bunch of external Excel files. To get data from an specific cell (in this case, cell F10) of the external file, all I have to do is this: ...
I want to select that list or part of it then run a VB module that references each item in the selection and compares it to a master list in a separate workbook that contains both the object and an additional value, and display that additional value in column B of the original workbook against each object in column A
I want to move the workbook I have created to a different folder on the same drive. The workbook is pretty big and has loads of links to other workbooks. If I move it will all of these links fail and if so will I have to manually reset them all? I guess I am asking if there is specific method of moving workbooks which will automatically change the links to the cope with the new location?
I need to create a formula or code which will return the value of cell d16 from an external and unopened workbook, where that external workbook's file name, directory and sheet names are provided within cells (able to be updated) of the current workbook. I have downloaded the add-in for INDIRECT.EXT but either being unfamiliar with this function or that I'm barking up the wrong tree all I'm getting is #REF!
And to add to my problem, I was hoping to use this formula / code within an excel table embedded in a word document.
I have been trying for some days to copy a module to an external workbook with VBA. I have about 40 workbooks that have the same format. although I developed these sheets. I am not the person who uses them. I have to on occasion alter the code for some reason, its getting tiresome.
I don't think I can use the personal workbook method for this as it is not me using the workbooks. I don't even know some of the people that use them. This courses me problems because of the number of workbooks. I want to be able to maintain the code by having to write it once and propagate it through the necessary files via the VBA.
I have code from C Pearson that copies a module to another workbook.
I have posted this here just in case. Most threads on this subject just direct you here any way....
Once I open a new workbook, how do I make it the active workbook to have a function make changes to it? Problem I am having is even after it is open, the function will only make changes to the workbook containing the Macro (Thisworkbook)....
I am new in VBA, but I have a short procedure to break all external links in the currently active workbook.Is there any option to firstly update all external links and only then break them?
Sub BreakLinks() Dim Links As Variant Dim i As Integer With ActiveWorkbook Links = .LinkSources(xlExcelLinks) If Not IsEmpty(Links) Then For i = 1 To UBound(Links)
I'm trying to summarize some data from an external workbook. The problem is that the worksheet names there are months (Jan2009, Feb2009 etc.) and the sheets rotate (change position) with time. In the summarizing workbook I would like to use a function to refer to (for example) cell A1 on the third worksheet, regardless of the current name of that worksheet. So I might have a cell in the summary workbook that looks something like "=CoolFunction(ExternalWB.xls, 3, A1)"
I want to copy a named range from an external workbook. Currently I am using some VBA copied from a recorded macro that first opend the 2nd workbook and then selects the named range, changes back to the original workbook and drops the copied range into the active workbook.
I would like to find a way to get around having to open the reference workbook, and instead simply point to the proper workbook name and named range.
I'm trying to create a workbook that opens the windows explorer and let me select a workbook, then in one worksheet merge all the active sheets present in one.
I have a list that show file names and when the necessary works on these files were completed, but the powers that be want more. I have been asked to add two more columns, one showing when the file was last opened and the other when it was last modified.
Is it possible to do this through VBA without having to open the files that are listed? If so I will run the macro when the workbook is first opened.
I have 3 sheets: 1: master entry sheet that fills data in 5 different excel docs. Then there is another doc that aggregates data from the 5 and presents totals on the data. I am trying to get the end result without having to have 7 different excel files open, but when I enter into the master entry sheet, the data doesn't seem to be "pushed" up to the 5 different docs until each one is opened up. Obviously, the master aggregator is not updated since the 5 don't have the new data. When the files are all opened at the same time, the data flows perfectly, I'm just trying to find a way to avoid having to open the 5 docs in the middle of the process.
when i run this code under a button on a sheet it works fine. but i would like to run when the workbook opens (but i get an error message
On Error Resume Next Application. ScreenUpdating = False Dim wb As Workbook Dim ws As Worksheet 'create new work order number... Set wb = Application.Workbooks.Open("c: empex_ExternalOrderNumber.xls") Set ws = Worksheets("NumberIncrement") 'get new WO number from numberincrement.xls If Err.Number <> 0 Then MsgBox Err.Description & "...help" Else mynewnumber = ws. Range("b1").Value Range("g5").Value = mynewnumber wb.Close End If
I have a workbook (Program_1.xls) which references another workbook (Program_2.xls). I want to close Program_1.xls using code in Program_2.xls. When the Program_1.xls is closed, the code stops.
Program_1.xls code
Sub Program_1() MsgBox "This is program #1" Application.Run "Program2.xls!Program_2" End Sub
Program_2.xls code
Sub Program_2() Source = "C:Documents and SettingsCohenMy Documentsprogram3.xls" target = "C:Documents and SettingsCohenMy Documentsprogram1.xls" Workbooks("Program1.xls").Close savechanges:=False ' ---> code halts here MsgBox "This is program #2" FileCopy Source, target End Sub
How do I get the final 2 lines of code to execute?
