I am creating a line graph to display changes in Cost Per Unit (CPU) of a given item over time.
The issue I have is that the CPU data on the line graph is displayed as 0 values where data is yet to be inputted. Instead I want the graph to remain blank where no data has yet been added. How can this be done?
find attached a simplified mock up of the spreadsheet.
Constant (fixed) values are:
- Date
- Hourly Rate
Values inputted on a daily basis are:
- Hours Worked
- Volume Picked
Calculated values are:
- Total Cost
- Cost Per Unit
- Mean [=average(CPU)]
- UWL [=mean+(2*stdev(CPU))]
- UAL [=mean+(3*stdev(CPU))]
I'm open to using VBA if necessary, however as I will not be the only user of this workbook when it is complete I would prefer to keep it a simple as possible.
I have a data set consisting of three columns. Column A is a name, B is an x-axis value, and C is an y-axis value.
I use the B and C column to plot the positions in an X/Y point diagram. This is working nicely. But is there a way for me to get the value in the A column as the label for the data? Or in some other way shown with mouse over or similar?
X-Axis = Week1:Week13 Y-Axis =Revenue for each week.
I have a line graph. If "Week9:Week13" have no value, my graphs line drops to 0. How do I make my line graph show no value when no value is inputed for "Week9:Week13"? I think I need to incorporate the =NA() in the original formula but I'm not sure how to do this.
If I have data that shows one year back information, how do I get my chart to have the last date showing up on the axis (the date label) to always be the most current date?
Excel 2010 - I need to create a graph that shows a week's use of a sportsground showing what sports were played, on which days and between which times. I thought I could show the times on the vertical axis, days on the horizontal axis and then the sports played in those times, however I'm unsure as to how to get the graph to recognise the times.
I've attached an example of some data and how I'd like to see it, I'm just not sure how I can do this using the chart set up!
I have a pareto for a manufacturing facility that has a list of nonconformists and their occurrences in columns K and L. My issue is since it is a running total for the year at certain times the values are 0 for the number of occurrences. This calculates fine, but the graph is very large and the failures are all located on one side instead of being evenly distributed. I am trying to get it to only plot for what has occurred and not have a bunch of blank values. To make it a little more complex I'm trying to avoid macros.. I can get them to show up blank just can't get the bar graph to resize itself to fill the chart.
I have a line graph that charts certain data per day in a month.
During the weekend there is no data. The graph however considers the number as zero, and I want it to just "skip" that day and plot the line directly from the friday date to the monday, instead of the line touching zero on saturday's and sundays.
Is it possible to do this? Or am I forced to adapt my table to only include days of the week?
The company I work for has kept a list of the types of objects sold with their houses and how many were bought for each customer, via an Excel document. Here's a snapshot - You can see the name of each type of object on the left, with each column afterward representing an individual customer (Each vertical row is one customer) and how many of each item they bought.
[URL]
We're hoping to make a bar graph of how many of each type of item has been sold. I selected all the titles and columns of numbers and ended up with this, which is almost what we're looking for:
[URL]
The problem here is that each individual customer has their own line on the graph. The Recessed Can Light one I highlighted is a good example of a lot of people who bought varying amounts of that one item. What I'm looking to do is combine the individual sales for each item and make a single bar for each representing the total sales overall, so we can gauge what the best and worst-selling items are. Is there any way to do this?
one of my excel reports, i am using a dsum formula and plotting a chart against it. i do not want to show the zeros on the graph, is there anyway i can do that, i could not find anything in the tools -> options.
I am using bar chart to display top 5 units sold each year to my Excel file. In the data table, I have listed all the units and its number (quantity) sold. The problem is, the legend of the chart displays all the units instead of just displaying units that has values (top 5 units each year) which makes the legend hard to read (see attachment) How do I get Excel to select legends only if there is a value for it?
I am trying to create a line graph to show the trends (up or down) of I-Fund vs Gold. The trouble I am having is how to set the axis. The date one is an easy one, but the gold range is more or less 800-1000, and the I-Fund is 13-18. How can I have these both on the same graph to compare? I am attaching an Excel sheet as a reference. Obviously I need to delete the empty IFund cells.
I was asked to make a trend graph showing activation's and deactivation's over time. My boss wanted it to be done automatically when you placed values into a simple excel sheet like the attached image (the graph would be below this).
I have a dashboard which has dropdown boxes to pick out the data you want to see. From this data i then have graphs which are graphing 0s from the data making the graph look horrible.
I know I need to add NA() to the cells so that 0s dont graph, but all my data has formulas in and i don't know how to add the NA part to the existing formula.
my formula for each cell is =IFERROR(VLOOKUP($A9,'DB data'!$A$1:$HH$2003,COLUMN(FP1),FALSE),"-")
This looks up name such as "sign on time", then goes to another sheet and retrieves the data.
Where can i add the NA part. I've tried instead of the "-" at the end but doesn't work. and ive tried instead of FALSE and this stops the formula from working.
The user will select a range (example, B4-Z4). The macro needs to test each cell to see if the number is in a certain range (example, is the number in the cell between 21-40, 41-60, 61-80, etc? - these ranges will not always be the same on each worksheet). If the cell is in that certain range, that cell is a 1 for that range. Example,
B4 = 23 21-40 = 1
C4 = 30 21-40 = 2
D4 = 45 41-60 = 1
After all ranges are tested, it will be graphed on a separate worksheet with the x-axis being the ranges (21-40, 41-60) and the y-axis will be the total number of cells that fit in the range. The above would be....................
Using Excel 2003. I have a data range for a graph. The values in the cells are the results of a simple If function - If(m28>0,n28,0). The results are taken from a larger data input exercise. But, the graph line (a simple graph!) plots the FALSE value (0) when I would like there to really be no value & hence no plotted point if the result is FALSE.
I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
How can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500 1/3/2000 $600 3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
I want to show values entered with percentage sign.(%) Right now, if i enter any value say,10 in a cell having percentage format, shows 1000%. For that, I don't want to enter 0.1. I just want to enter any value and see it with percentage symbol.
I have the following situation: I have some values in column A. other values in column B. I want to be able to display a list using the values in column A and values in column B. A1-> B1, etc.. Attach file: Book2.xlsx
I've tried creating a formual to only show the min values for each row,If any values in my table is equal to 0, than, it should not display a 0, but the lowest, positive number available. in my table. However, I'm not able to get it fully functionable.
I would like a formula to return the top 10 products sorted by value, but to return the colour name in order starting with the larges and the value in a different column. Ideally I would like to do as little formating as possible. I have attached a spreadsheet as an example
why the following code generates an error if I use the backspace key to clear the textbox?
Code: Dim t As Date If Len(Controls.Item("txtstart").Value) = 4 Then On Error Resume Next t = TimeSerial(Left(Controls.Item("txtstart").Value, 2), Right(Controls.Item("txtstart").Value, 2), 0) On Error GoTo 0 ElseIf Len(Controls.Item("txtstart").Value) = 5 Then On Error Resume Next
I have a piece of code in one of my Macro's, if I run the macro and don't let this piece of code run everything works fine, when I let this piece of code execute the excel file keeps running until I go to save, at which point I get a message saying "Microsoft office excel has encountered a problem and needs to close. We are sorry for any inconvenience".
Code is as follows:
If MsgBox("Copy and hardcode this scenario?", vbYesNo) = vbYes Then Calculate Application.DisplayAlerts = False
