How To Plot No Values In Bar Graph
Jun 3, 2014
I have a pareto for a manufacturing facility that has a list of nonconformists and their occurrences in columns K and L. My issue is since it is a running total for the year at certain times the values are 0 for the number of occurrences. This calculates fine, but the graph is very large and the failures are all located on one side instead of being evenly distributed. I am trying to get it to only plot for what has occurred and not have a bunch of blank values. To make it a little more complex I'm trying to avoid macros.. I can get them to show up blank just can't get the bar graph to resize itself to fill the chart.
View 3 Replies
ADVERTISEMENT
Oct 20, 2006
one of my excel reports, i am using a dsum formula and plotting a chart against it. i do not want to show the zeros on the graph, is there anyway i can do that, i could not find anything in the tools -> options.
View 2 Replies
View Related
Jun 9, 2014
How to plot a step graph?
I have attached a drawing by illustrating the graph that I wish to plot.
Attached Image : jpg Capture.JPG
View 9 Replies
View Related
Mar 27, 2014
I'm stuck at a point in a graph that I am creating. Attached is as far as I have gone and now i'm having a gap on how to take the 2006, 2007 which is already in graph and add in how these years compare to guidelines visually in the same graph?
for instance ratings 1-9 are grouped in guidelines 1-4, 5-7 etc. How do i add in the 3 guides against each point? I have thought about adding a secondary axis but not how best to demonstrate the range of 1-4 to appear behind or above those points?
View 1 Replies
View Related
Apr 14, 2014
I would like to create a chart in vba which contains 2 sets of data, both using the same x axis. The first must be a line graph, the second a staggered bar chart. This must be represented on one chart with data labels. Also, how do I change the colour of the plots?
View 5 Replies
View Related
Oct 4, 2013
I have two ranges of cells containing names of chemicals, call the first one "Product" and the second one "Byproduct".
Also, there are two other ranges of cells, called "Productvalue" and "Byproductvalue". These cells contain the numerical values of products and byproducts. How can I plot both the products and byproducts in the same graph using xlBarClustered in different colors?
View 1 Replies
View Related
Nov 20, 2013
Given 100 samples, to calculate: numbers of hours spent on study is dependent on numbers of hours spent on social networking site.
x (social networking site)
y (study)
x^2
xy
6
4
36
16
24
[Code] .......
SUMMARY OUTPUT
SUMMARY OUTPUT
Regression Statistics
Regression Statistics
Multiple R
0.571423290877713
[Code] ....
So, I've got the coefficient of correlation equals to 0.57, how can I plot my scatter graph?
View 1 Replies
View Related
Jul 26, 2007
I need to know, can I plot a graph (ongoing plotting each value) from just ONE single cell which constantly updates it's value? (I have a third party datafeed hooked up to one single cell in Excel 2000 [yes, the old one ] and it updates quickly in realtime automatically throughout the day). But I need to trace the history of the values, plot a graph of all the values which ever show up in that single, in other words.
Also, I need to date and time stamp each new plot on the X axis of the graph (only when a new figure appears in the cell). So, for example, my one and only "datacell" (say, A1!) which is linked to an external datafeed is showing "145.87541" at 12:30:45 on 27/04/05. I need that time and date on the X axis which the number as the plot. Then that cell changes value 2 seconds later to "145.87587" at 12:30:47 on 27/04/05. Now I need that second plot on the graph at the correct time/date stamp so I am constantly plotting the history of the value onwards (potentially forever!) using just that one, automatically updating, cell.
View 9 Replies
View Related
Jun 5, 2008
Im working on a graph that uses the code below to plot the series
Sub AddDataToMyChart( Name As Range, XData As Range, YData As Range)
With ActiveChart
With .SeriesCollection.NewSeries
.XValues = XData
.Values = YData
.Name = Name
End With
End With
End Sub
Sub Test()
Dim lngTopRow As Long
Dim lngBottomrow As Long
Dim lngCol As Long
lngTopRow = 3
lngBottomrow = 8
ActiveSheet.ChartObjects(1).Activate
With ActiveSheet
For lngCol = Range("D2").Column To Range("h2").Column Step 2
AddDataToMyChart .Cells(2, lngCol), .Range(.Cells(lngTopRow, lngCol), .Cells(lngBottomrow, lngCol)), _
.Range(.Cells(lngTopRow, lngCol + 1), .Cells(lngBottomrow, lngCol + 1))
Next
End With
End Sub
...
View 4 Replies
View Related
Aug 18, 2006
how can i plot multiple series of values in one graph after checking some check boxes, which i have previously done, randomly?
View 4 Replies
View Related
Aug 1, 2008
I have the following list of values which I want to plot as a zigzag. But when i create a line chart from them, the lines connect the zeros and the non-zero points - while I want the lines to connect only the non-zero points - so that there is a zigzag-like pattern shown.
the Data:
0
0
0
0
0
1.4343
0
0
0
0
0
0
0
0
1.4332................
View 6 Replies
View Related
Oct 24, 2008
I have attached 2 files. One of them is called Macca.xls. This is the file that was created for me by shg on an excelforum. The other isOreDep_updated.xls - this file is the updated list that I want to convert into the Macca file or make it look like the Macca file.
I awas trying to make a couple of plots, but they were not llooking like some examples I have.
In the OreDep-updated file attachment is my data I needed to use. I needed to make 2 plots:
Plot 1: Resource Grade (log scale) against the proportion of deposits (linear scale)
Plot 2:Tonnage (log scale) against proportion of deposits (linear scale)
This was done with my old data that is shown in the Macca.xls attachment.
They are meant to cumulative proportion plots. As a line or scattergram. An example of what they are meant to look like is at: http://www.nbmg.unr.edu/dox/ofr962/c11.pdf on Page 4 and 5.
shg managed to make them look like I wanted with the log normal smooth line too.
My problem now is that I want to change the data under Name, Resource Tonnes and Resource Grade (basically replace the old data in Macca.xls with the new OreDep_update.xls, to come up with same type of plots). But whenever I try to copy and paste the data into the Macca file it messes up everything. I looked at the formula that was created and I really havent a clue how to change it, without affecting everything else like the plots.
I also need to add 2 new columns for date and for reference, and it wont let me do that.
View 9 Replies
View Related
May 9, 2008
I have several worksheets with thousands rows (independent variables) and hundreds columns (all dependent variables). Each line basically gives me hundreds values for each independent variable - see below:
...
C9 39.65 653.95 5.28 163.56 99.56 14.49 ... ...
E9 7535.92 21500.56 2835.88 3122.98 7225.34 5371.25 ... ...
G9 111568 298021 12940 31645 181797 36996 ... ....
...
I need to know how the values in each row are distributed, and I ideally plot a 2D column graph of the distribution. Is there a way to do that and create/program a macro (with relative button on the workboook) that does it automatically once clicked?
Very often there are outlying values (bigger or smaller by a factor of 1000 or even more), mistakes, which I would like to identify and fix possibly.
View 9 Replies
View Related
Jun 30, 2008
I've been trying to work out a code for a while now to plot some series in rows on a graph. The wonderful Mr Pope helped me with one before but for series in columns but i just don't seem to understand it enough to use it for this problem. the graph already has 2 series plotted (called the envelope) so i have to use seperate series to plot the data.
Basically the name of series is down column A
but the range is from E1 to Y1
and the data to be plotted on the graph which already has two series plotted in it is E2 to Y2, E3 to Y3 etc. iv been trying to use this code but failing miserably
Sub adddatatopsd(Name As Range, XData As Range, YData As Range)
With ActiveSheet.ChartObjects(1).Chart
With .SeriesCollection.NewSeries
.ChartType = xlColumnClustered
.XValues = XData
.Values = YData
.Name = Name
.ChartType = xlXYScatterSmooth
End With
End With
End Sub...........................
View 4 Replies
View Related
Jul 9, 2014
I would like to make a histogram using excel. I have successfully made the bins and frequency functions. Once I want to add the x values, I get an error. There are many examples online, but I can't get it to work.
[Code] .....
View 1 Replies
View Related
Mar 15, 2012
I have data that starts from say, 17:50 hours. However, I would like the chart to start from 00:00 to 00:00 so it is a full 24-hour period. So up to 00:00 to 17:50 hours, it would be blank then the data will be plotted from 17:50. How do I do this? If I select the existing data from 17:50 and ask Excel to create a chart, the x axis starts from 17:50 (not 00:00).
View 4 Replies
View Related
Apr 8, 2012
I am importing a text file and plotting some of its contents versus time. The file provides the end time and the step interval. I know that in Matlab you can define a set of values with the start, end, and interval, but I'm having a hard time figuring out how to do this with VBA. I have toyed with fill series, but no luck there.
Specifically, the file I'm reading in (a relay event file with voltages and currents) gives the maximum cycles as 15 and the samples per cycle as 16. Therefore, for each voltage or current sample, I need the time to show as 1/16, 2/16, 3/16, ..., all the way to 15 cycles. I have tried to manually do this and record the macro, but after I put in a few x/16s, when I try to extend the formulas down the rest of the cells, instead of continuing the trend (4/16, 5/16, 6/16, etc.), it repeats what I put in first.
View 1 Replies
View Related
Dec 4, 2012
I am having a problem when making a XY-plot diagram because I want text values on the x-axis instead of numbers - but that doesn't seem to be possible to get with this type of diagram?
View 2 Replies
View Related
Dec 8, 2006
I wanted to ask if you know any charting software which can give weight to elements on a chart when two or more variables overlap? Ideally the color intensity of, say, circles should increase from pale blue to vivid blue depending on the number of the data items which are operlapping at one point. I include a sample chart which should give you a general idea of the chart I want to make and the data set from which it was made.
View 5 Replies
View Related
Sep 26, 2007
I have over 5000 cells of data. I want to take 4 data points at a time, average them then plot them on a dynamic chart. I know how to do the dynamic chart but how can I take the average of the the first 4 numbers store it in a different cell, then the next 4 and so on...
View 4 Replies
View Related
Mar 20, 2014
I have data that is something like this:
Group Assets
1 200
1 300
2 150
3 50
1 500
3 100
I want to create a scattered plot charts based on the data above but I cant get it to work for some reason. I want to have the "Group" on the x-axis and the "Assets" on the y-axis. I don't want to combine the same group number (for example to have group 1 with total assets of 1000, I want to keep it as 200 300 and 500 because I want to show which group is more represented than other group.). I have tried sorting the data by group and also with out sorting but the data doesn't plot at all (everything looks clustered at the 0 level on the x-axis instead of the respective asset level.
View 1 Replies
View Related
Jun 29, 2014
I'm using Office/Excel 2004 on a Mac Mini duo running OS10.6.8. I upgraded to Office/Excel 2011 but I find the program so horrible I had to switch back to 2004.
The problem: On one chart, the Y-axis label values have moved from outside the left-hand axis to _inside_ the right-hand axis and within the plot area. I can't figure out how to move the labels back to the right position.
View 5 Replies
View Related
Sep 6, 2006
I have a chart that shows up to a list of 28 people and the number of sales for that day. I'm try to make the chart only show the names and number of salesperson that are not = to null. This is what the chart has for values right now "=' Nest Average'!$C$6:$C$33". How can I make it so that it only shows those cells if not = to null.
View 2 Replies
View Related
Jan 16, 2010
I have a bar graph..and on top of each bar, i want the x value for that bar.
View 2 Replies
View Related
Feb 19, 2010
I have a line graph that charts certain data per day in a month.
During the weekend there is no data. The graph however considers the number as zero, and I want it to just "skip" that day and plot the line directly from the friday date to the monday, instead of the line touching zero on saturday's and sundays.
Is it possible to do this? Or am I forced to adapt my table to only include days of the week?
View 8 Replies
View Related
Jul 9, 2012
The company I work for has kept a list of the types of objects sold with their houses and how many were bought for each customer, via an Excel document. Here's a snapshot - You can see the name of each type of object on the left, with each column afterward representing an individual customer (Each vertical row is one customer) and how many of each item they bought.
[URL]
We're hoping to make a bar graph of how many of each type of item has been sold. I selected all the titles and columns of numbers and ended up with this, which is almost what we're looking for:
[URL]
The problem here is that each individual customer has their own line on the graph. The Recessed Can Light one I highlighted is a good example of a lot of people who bought varying amounts of that one item. What I'm looking to do is combine the individual sales for each item and make a single bar for each representing the total sales overall, so we can gauge what the best and worst-selling items are. Is there any way to do this?
View 4 Replies
View Related
Dec 31, 2013
I am creating a line graph to display changes in Cost Per Unit (CPU) of a given item over time.
The issue I have is that the CPU data on the line graph is displayed as 0 values where data is yet to be inputted. Instead I want the graph to remain blank where no data has yet been added. How can this be done?
find attached a simplified mock up of the spreadsheet.
Constant (fixed) values are:
- Date
- Hourly Rate
Values inputted on a daily basis are:
- Hours Worked
- Volume Picked
Calculated values are:
- Total Cost
- Cost Per Unit
- Mean [=average(CPU)]
- UWL [=mean+(2*stdev(CPU))]
- UAL [=mean+(3*stdev(CPU))]
I'm open to using VBA if necessary, however as I will not be the only user of this workbook when it is complete I would prefer to keep it a simple as possible.
View 3 Replies
View Related
Oct 22, 2008
I've two collumns, after some index the values of cells are zero
how i can draw a chart without selecting those zero cells?
View 6 Replies
View Related
Dec 19, 2013
I am using bar chart to display top 5 units sold each year to my Excel file. In the data table, I have listed all the units and its number (quantity) sold. The problem is, the legend of the chart displays all the units instead of just displaying units that has values (top 5 units each year) which makes the legend hard to read (see attachment) How do I get Excel to select legends only if there is a value for it?
View 2 Replies
View Related
Oct 21, 2009
I am trying to create a line graph to show the trends (up or down) of I-Fund vs Gold. The trouble I am having is how to set the axis. The date one is an easy one, but the gold range is more or less 800-1000, and the I-Fund is 13-18. How can I have these both on the same graph to compare? I am attaching an Excel sheet as a reference. Obviously I need to delete the empty IFund cells.
View 2 Replies
View Related
