Show A Tab With A Graph
Aug 31, 2009I know that to show a tab in VBA you can write worksheet("NameOfTheTab").select
However, it does not work when the tab is just graph.
ADVERTISEMENT
Causing Graph To Show No Values Instead Of 0?
Dec 31, 2013I am creating a line graph to display changes in Cost Per Unit (CPU) of a given item over time.
The issue I have is that the CPU data on the line graph is displayed as 0 values where data is yet to be inputted. Instead I want the graph to remain blank where no data has yet been added. How can this be done?
find attached a simplified mock up of the spreadsheet.
Constant (fixed) values are:
- Date
- Hourly Rate
Values inputted on a daily basis are:
- Hours Worked
- Volume Picked
Calculated values are:
- Total Cost
- Cost Per Unit
- Mean [=average(CPU)]
- UWL [=mean+(2*stdev(CPU))]
- UAL [=mean+(3*stdev(CPU))]
I'm open to using VBA if necessary, however as I will not be the only user of this workbook when it is complete I would prefer to keep it a simple as possible.
Show Third Column As Label In Graph
Jan 15, 2013I have a data set consisting of three columns. Column A is a name, B is an x-axis value, and C is an y-axis value.
I use the B and C column to plot the positions in an X/Y point diagram. This is working nicely. But is there a way for me to get the value in the A column as the label for the data? Or in some other way shown with mouse over or similar?
Dataset could look like:
A
B
C
Jensen1
14
150
[Code] .......
Line Graph Show No Value When No Value Is Inputed
Dec 29, 2008X-Axis = Week1:Week13
Y-Axis =Revenue for each week.
I have a line graph. If "Week9:Week13" have no value, my graphs line drops to 0. How do I make my line graph show no value when no value is inputed for "Week9:Week13"? I think I need to incorporate the =NA() in the original formula but I'm not sure how to do this.
Show Progress With Graph Bar With Percentage Input
Jul 31, 2014I would like to know how to input 10% 25% ect then in another cell the graph bar growing till 100% mark is completed.
View 6 Replies View RelatedHow To Show Vertical Axis On Both Right And Left Side Of Graph
Nov 22, 2011Is there a way to show the Vertical axis on both right and left side of the graph or at least on the Right hand side?
View 5 Replies View RelatedShow Latest Date On Axis In Line Graph?
Apr 10, 2014If I have data that shows one year back information, how do I get my chart to have the last date showing up on the axis (the date label) to always be the most current date?
View 4 Replies View RelatedExcel 2010 :: Create Graph To Show Times Of Use For Particular Sporting Activities On Particular Days
Mar 20, 2014Excel 2010 - I need to create a graph that shows a week's use of a sportsground showing what sports were played, on which days and between which times. I thought I could show the times on the vertical axis, days on the horizontal axis and then the sports played in those times, however I'm unsure as to how to get the graph to recognise the times.
I've attached an example of some data and how I'd like to see it, I'm just not sure how I can do this using the chart set up!
Attached File : Graphs.xlsx
Make A Scatter Graph That Will Graph The Attached?
Mar 21, 2014I would like to make a scatter graph that will graph the attached. The score would be on the Y axis and the birth date would be on the X axis. This is simple to do by itself but what I would like to do in addition to this is to have the top 25% of the scores a single color, the middle 50% of the scores a second color and then the bottom 25% of the scores to be a third color. And if it is possible to have the ID visible when you move your cursor over a given dot in the graph. Currently when I make a scatter graph the X,Y coordinates show when I hoover the cursor over a dot.
View 7 Replies View RelatedMake A Graph That Will Graph Against Time
Jun 11, 2006How can i make a graph that will graph against time? lets say i have a bank balance like this:
1/2/2000 $500
1/3/2000 $600
3/12/2000 $400
there may be more than one entry on any one given day, or there may not be an entry for 2 weeks. How can i graph the running balance in a way that it will show the timeline just as a calendar year(or however long i selected) and the points are plotting according to their date, not just equally spaced out.
Line Graph: (line Graph To Display An Amount Over Time)
Dec 30, 2008I want to use a line graph to display an amount over time - that's the easy part. On the other hand, I would like to have to group the lines based on a value.
A short example:
Imagine you own 3 different stores and you're selling oranges. So your table looks like this:
http://img179.imageshack.us/my.php?image=orangeshm4.jpg
Now I'd like to have one graph (3 different graphs won't work as the rows increase -I need to select the whole column as data source):
Date on the x axis,
Oranges sold on the y axis,
and one line per store (e.g. a green one for store A, a red one for B and a blue one of C, doesn't matter).
Another Sheet To Show Each Class Down The Rows And The Columns To Show Each School Rule
Mar 20, 2009I have an excel 2003 sheet that collects data from Infopath forms. The forms are to record students who have broken school rules, when, where, repercussions etc. One column shows their class and there is a separate column for each rule broken.
I want to create another sheet to show each class down the rows and the columns to show each school rule. Therefore, each cell would show the number of each particular rule broken for each particular class. I have tried to do countif and sumproduct (if on sheet 1, column B the class is KA and on sheet 1, column M, the rule is bullying = how many times this has occurred).
If A Cell Has Data Show It If Not Show 0
Oct 9, 2009I have a column of data held in column B.
I am required to show the following.
If there is data in the cell then it is to be left. If there is no data in the cell then I would like to show the value 0.
I have tried using a circular reference, using the formula =IF(ISBLANK(B1),0,B1) and other similar formulas but they dont work as the formula overwrites the data in it.
do I need a macro?, or conditional formatting?
Show Blank Not Show 0
Oct 31, 2008i use function countif "aa" in range A2:F2 COUNTIF(A2:E2,"aa")how i can do, if i do not need 0 to show when it not found "aa". i want it show blank
View 4 Replies View RelatedX-Y Graph
Nov 11, 2009I have a X-Y graph with 602 data points. My x scale is a counter from 1 to 602 and the Y is a decreasing set of numbers. When I hover my mouse over the points on the graph (I zoomed the graph) My first 3 points are all labeled as Point "1". At the end of my graph, my last 3 points are labeled 599,601,602, it skips 600.
I am using Excel 2007. Has anybody seen this before?
Show Data In Cell Only If Other Cells Show Data
Sep 8, 2009I have 2 different formulas that I need changed in a similar way.
The first formula is for cell AV11:
=SUM(BI11,BP11,BW11,CD11,CK11,CR11,CY11,DF11,DM11,DT11,EA11)+10
Every cell starts off blank.
What I need is for cell AV11 to always start off blank until data is entered into one of the other cells. The problem is that since the sum always needs to be +10 only when data is entered in the other cells, I don't know how to keep 10 from showing in cell AV11 when no data is typed in the other cells.
The other formula is for cell CO39:
=(CU8)+3
I pretty much need the same thing. If no data is entered in cell CU8, then I do not want cell CO39 to show the 3.
Getting Decimals To Appear On Graph?
Jul 17, 2014I am creating a graph with a wide range of values (0.06 - 300). The smaller values are barely visible on my column graph. I have tried all of the tricks I know. Any way to get the smaller values to show up instead of just hovering towards the bottom of the graph?
View 9 Replies View RelatedSet Up Graph With Dates
Dec 27, 2013I need to set up a graph (smooth line chart possibly) with an (x axis) that are not regular intervals. I've attached an example.
the amounts would be (y axis) and the corresponding dates (x axis).
That would be great to start with. Then I have one of these sheets for each month, can there be a continuous graph made using each month or does it need to be individual graphs.
Davyccexamp1.xls
How To Get Quadrant Graph
Jul 22, 2014I want to plot a quadrant graph as in the attachment, but I can't find them. how to plot them.
View 2 Replies View RelatedPut The Annotation On The Graph
Feb 27, 2007I need to create a graph using the data in the following format:
Item X Y
A: 10 100
B: 20 200
C: 30 300
D: 40 400
E: 50 500
etc.
I need to annotate points with A,B,C etc in the scatter plot so that the same can be quickly identified in the graph.
Scattered Graph ..
Feb 16, 2009I have three colums of data.
First represet company , second colum represent data1 ( x- axis) and third represet data2 ( y-axis).
I want to plot x-y graph with the company name
Eg.
McDon | 10 | 20
In the above case i want to show a round circle or dot which will be 10 right on x axis and 20 up on y axis and near the dot i want to show McDon as company name.
See that attachement... Graph is coming well.. but i am not able to add the company name to the dots.. or pot of x and y intersection
Grouping In A Graph
Jun 16, 2009I would like to create a graph where the numbers are grouped in such a way as all numbers between 0 and -1 are shown in one column, all numbers between -1.1 and -2 are shown in the next column, all numbers between -2.1 and 3 are shown in another column etc
The numbers are shown below
11/03/09
-2.5
-3.8
-3.9
-4
-4.1
-4.5
-4.6
-4.9
-5.2
-5.4
-5.4
-5.5.......
Graph Plotting...?
Jul 12, 2009I use spectrometer in my reesearch. The datas are in (a, b) format in single cell. Is it possible to seperate a and b seperately? like a in seperate cell and b in seperate cell?
View 4 Replies View RelatedOne Graph Three Variable
Feb 4, 2010I want to carry out a survey in Sept, Oct and Nov. I will asking 1000 random people in each survey what is their personal favourite--- iPhone, Nexus or Blackberry. Counts of each phone type is then divided into male and female.
Now we have three variables: gender, phone type and month. Is there any way I can present 3 variables on X, Y & Z axes and the value at their intersection as bubble size (or colour gradient)? Theoretically it's possible but I can't find a way to do it in excel. Or anyone knows any software that can get the job done?
Graph Next To Items
Nov 29, 2012See attached sample file. Any way to get column graphs next to each item (horizontally), each column being the revenue for that item.
Attached File : Sample.xlsx
Dimensions Of A Graph.
Nov 25, 2008My macro prduces some text ang a graph on the screen and I can print the result.
Ok so far. But when I run this macro in a different screen resolution, the layout of the page is disturbed: the graph is on the wrong place and the dimensions of the graph are different.
Of course I can drag and resize the graph and include this proces also in the macro but I think this is not the right way. My question is: are in VBA commands which can fix the graph to a location on the sheet/screen and adjust the graph to the requested heighth and width?
How To Create N1.85 Graph
Sep 28, 2004Trying to create an N1.85 graph in Excel that has irregular spaced tick marks on the X-axis. Found the following information but no luck with it. Need US measure for this semi-log (10 X N1.85) graph. Also called a semi-expo (Q1.85) graph.
The resulting graph appears to be a log graph in reverse with one scale; the column widths are smaller at the left and become larger as they progress to the right.
Info found:
A 1.85 graph can be constructed manually by establishing a series of 15 values (in the case of the example in D5.2.1) from a base measurement to the exponent of 1.85.
Step 1
Select a base measurement for the desired size of the graph. A base measurement of 1.0 mm will produce a graph to 15 which is approximately 150 mm wide; a base measurement of 1.5 mm will produce a graph approximately 300 mm wide. In the case of a 1 mm base measurement, the x-axis numbers will be the 1-15 series. In the case of a base of 1.5 mm, the numbers will be represented by the series: 1.5, 3.0, 4.5, 6.0 etc. for 15 values.
Step 2
Construct a series of columns to the 1.85 exponent values measured from the zero point. The rows representing the pressure values are linear.
NOTE - A good approximation of the above can be computer-generated by a spreadsheet programme by entering a column width established from the exponential figures by subtracting the preceding value in each case. The column dimensions are displayed in the number of standard characters able to be accommodated in the column width which is slightly inaccurate in linear dimension.
The figures below indicate the values for a graph based on 1.0 mm.
Linear scale Exponential value of linear values = Column width = linear values to 1.85 power exponential value - preceding value
1 1 1
2 3.61 2.61
3 7.63 4.03
4 13.00 5.36
5 19.64 6.64
[Code]....
Creating 3D Bar Graph
Feb 10, 2013I want to create a graph as showed below.
Actual graph will contain a larger/longer X-axis (40 instead of 6 readings), but no more than 2 rows af data (A and B), of which one has a seqenced number af data (row B).
Row B alo has got singular points of data superimposed over the cylinders.
I have got all the numbers ready, but I don't know whether or not it is even possible to create a graph like this.
The cylinders have values up to 45.000 (accumulated in row B), the points (black dots) go from 2 to 6.
If so, I'm having trouble selecting the correct template out of the excel's standard list of graphs.
Graph X And Y Not Working
Jun 5, 2013I have data refering to acceleration of a motorcycle. it uses a calculated value representing acceleration.. each value only relates to the one before and after it, and has no real world value example:
RPM 3000 = .1169 acceleration 4000 = .121 5000 = .131 6000 = .141
Now i want to compare my acceleration vs my real world speed based on each gear, below if first gear.
RPM 1497 = 15 kph 2994 = 30 kph 4491 = 45 kph 5988 = 60 kph
So the one axis is common but the values are not equal to one another and how to get the graph to show RPM vs speed and acceleration?
Bar Graph Not Starting At Zero?
Jun 5, 2014I'm working on a stacked bar graph based on the below info...
Min
Mid
Max
N1
$21.00
$30.00
$38.00
[code]....
I'm trying to adjust the starting point so that it does not start at 0.
For example...
N1 - $21.00 - $38.00
N2 - $26.00 - $45.00
N3 - $30.00 - $53.00
is there a way to do this?