Cell Activate Macro/userform
Oct 11, 2007How do I make a userform or maco run when a cell is clicked on. For instance in my case if E20,E23,E30 are selected I want a userform to popup.
View 9 RepliesHow do I make a userform or maco run when a cell is clicked on. For instance in my case if E20,E23,E30 are selected I want a userform to popup.
View 9 RepliesI have a user form containing a calendar. What I'm trying to do is that if any cells are selected in a range - D4:E83 - then I want to run the userform therein forcing the user to use the calendar and ensure the date is correctly formatted.
The userform is named frmCalendar.
Basically, I'd like my macro to be activated whenever the value in cell A4 changes. Cell A4 has a numerical value between 1 and 10. The macro clears a contents table. Here it is:
Sub Clear()
Sheets('Form').Select
Range("H4:L10").Select
Selection.ClearContents
End Sub
How to get the (module) macro to be activated whenever cell A4 changes value?
I have an excel file that I want a macro to run when the cell changes to "Yes" (location B21). The cell options right now in a drop down list is "Yes" or "No". The Macro is called helper. How do I get this to work when they pick yes or no from the drop down list. I wanted to attach the file in this post, but it will not let me. I can email it to anyone who would like to work on it.
View 9 Replies View RelatedIs it posible that when data or text is entered into a cell and the enter key is pushed that this can either run a macro or activate a hyperlink to go to another worksheet for user to follow further instructions?
OR instead of going to another worksheet a pop up message appears with instructions and then can be OK'd to remove message and proceed?
I have a UDF in Cell Sheet1!A1 that inputs some ranges from Sheet1 and calculates a number. Then I have a sub that calculates the value of this function with Evaluate(Sheet1!A1.formula). However, this only works when I am in Sheet1. Otherwise, I get the wrong calculation. How can I avoid this? I will post the code in the open source forum as it otherwise is quite good and automatically resizes array functions to their proper size.
View 2 Replies View RelatedI would like to be able to check a checkbox on a userform with a keyboard stroke rather than using the mouse. Any key will do, "P" or Enter would be prefered. It would make data entry much easier.
View 4 Replies View RelatedI am trying to have a ComboBox activate a specific sheet based on the value of "ComboBox1.Column(1)". I have many sheets to select from so i want to avoid using the Case method Here is a small sample of my code that isn't working:
[Code] .....
Userform Activate Label in correct format. I have the following code in a userform activate
View 2 Replies View RelatedI have a userform that has a listbox that contains data in 7 columns. I also have a command button that when clicked allows the user to edit the data in whatever row of the list box is highlighted. This works fine.
I decided to have a double click in the listbox on a row do the same thing. So I simply picked the double click event and called the command button sub. When I try this, it runs the command button sub, but then it runs the userform Activate sub. This is a problem as it does things that I do not want to occur again.
I then decided to put the command buttom code in a separate sub and then call that sub on the double click -- same result.
Then I just put the exact code that I have in the command button into the double click event -- still does it.
Anyone know why this happens, I see no reason for it. It works great in the command button, but with double-click it run the userform Activate sub when it is done.
Here is the code that runs (if called by a command button it works fine, if called by a double_click in the listbox, it runs the userform_activate sub):
Private Sub Edit()
SetCell = "d" & ListBox1.ListIndex + 5
Range(SetCell).Select
Range("AA1").Value = 1
ADD_ODC.Show
NextRow = Range("D65536").End(xlUp).Row
EndARR = "J" & NextRow
ODCData = Range("D5", EndARR)
ListBox1.Column = WorksheetFunction.Transpose(ODCData)
Range("AA1") = ""
ListBox1.ListIndex = -1
Filling
End Sub
I have developed a Userform button in Excel 2010 using the developer icons, which when clicked on with my mouse it runs my super dooper macro. It works great!
But one thing I want to have happen is to have the choice of using the Enter key to start the macro or use the left mouse button
For example, I place data in (say) cell A1 and the userform button is in cell A2. When I place the data in A1 and press the Enter key, the cursor moves down to A2, but doesn't highlight the user button. When I press the Enter key again, the cursor moves to cell A3.
What I want is when I fill in the data in A1 and press the Enter key, the cursor moves to cell A2 and selects the button, so that when I press the Enter key again, it activates the macro.
I have a cell (B2) in which there is a formula referencing the value of another cell with the purpose of generating a URL- ="[URL] such that when a numeric value is entered in B3, B2 is made to contain the full URL including B3 as a unique identifier.
I have a macro which straightforwardly copies B2 and pastes its value in the same cell, rendering the text value of the URL.
How do I go about activating the URL as a hyperlink in the macro? It seems like if I click in the cell and hit return, or right-click/Hyperlink.../OK I'm creating a macro to reference the exact unique identifier present at the time that I'm recording the macro- e.g. if B3 is "123", I'm setting the macro to set B2 as [URL] rather than the actual unique identifier in B3.
Has anyone successfully activated the content of a cell as a hyperlink dynamically based on its exact content?
Is there a way to activate a Macro with a conditional in one of the cells? It's like this, I want that if the content of A2 changes to "True" then C2,D2 and E2 change to bold and the background color change to yellow. Is there a way to do this?
View 14 Replies View RelatedConsider using a Worksheet Calculate Event macro (not Change Event) to
monitor the cell in question and call your macro when conditions are right.
"coal_miner" wrote:
> Greetings. Is there a way you can activate a macro through a formula.
> Example:
> =if(A1=B1,(macro here),"")?
I want a macro to be activate ONLY when I check the checkbox. Right now, it activate the macro each time I checked the box.
I want the macro to be activate ONLY when I put the check sign in the checkbox. Is that possible?
I need to write a macros that will activate another macros whenever the cell "I4" is modified. So far it is not working the way it suppose to. Maybe anyone can spot a mistake? Here are both Macros that I have: ....
View 9 Replies View RelatedI have code to do what I need to do currently but it only works for one cell. If I try to get it to copy down through a range it loops endlessly back and forth between two values. I am sure that there is an easy way of accomplishing this. I would appreciate anyones help or suggstions. Thanks.
Here is the code that I am using on the worksheet
I'm trying to figure out how to activate a macro from combo box or list box.
But no success.
I have a list of names:
AAA
BBB
CCC
111
222
333
That I can view through the combo box.
I have created a list of macros, that carry the same names,
AAA
BBB
CCC
111
222
333
The Q is: how can I link each name to its own macro?
so when chosen, will activate the macro?
How would you activate a button, if one hits enter while in the cell that contains the button?
View 9 Replies View RelatedI want macro2 to activate whenever there is a change in Range(C25:C5000). I want macro2 to activate only once even if there are 10 changes to the cells within this range. I tried the code below but it does not work.
Private Sub Worksheet_Calculate()
If ActiveCell.Row > 25 And ActiveCell.Row < 5000 And ActiveCell.Column = 3 Then
macro2
End If
End Sub
I am writing a code that has a sheet change event linked to call on a number of macros. The vba works fine until I change another cell and it activates the same macro.
VB:
Private Sub Workbook_SheetChange(ByVal sh As Object, ByVal Target As Range
Select Case Range(BI47)
Case "1"
[Code]....
I have tried if statements and everything else I can find, most will not work, others report errors. The code and macros will be the same on many sheets but work independently and BI27 is the source of the change
I have a program that has all Excel Workbooks in seperate instances of Excel. There is a very sound reason for doing this.
The user has maybe 3 to 10 workbooks open. There are times when a workbook is active and has a Macro Link to open one of the already open workbooks.
When the user clicks the link, they naturally get an error message stating that the workbook is already open. Then they have to close the error msg and click on the Macrosoft Tab and look thru the list of open workbooks and then click the one they are looking for. Additionally, in this Menu Program the user really doesn't even have to know the name of the various workbooks.
I hope everyone will believe me when I state that this program works berautifully.
Right now I am simply cleaning up and making a few little things work better.
QUESTION When the user clicks on a macro link that is to open a workbook that is already open, how - On error - can I have the macro continue on and activate the requested workbook - - - Please remember they are all in separate instances of Excel.
Since the code I'm using can determine if the requested workbook is already open, I think there has to be a way to activate that workbook.
I have a multi-sheet workbook. The first sheet is a summary of results from the rest of the workbook. I would like this summary sheet to auto-refresh itself each time the sheet is activated. The VBA code triggered by the Worksheet/Activate event feeds some parameters out to other sheets, then copies back the results to the summary sheet of the workbook.
While doing so, it keeps "reactivating" the first sheet, causing it to get into an endless loop that is triggered by the Worksheet/Activate event. Essentially, I'd like the Worksheet/Activate event to go dormant for 15 seconds or so each time it is triggered.
I need macro that can search through worksheets and identify text urls (pair Networks - World Class Web Hosting.) within a cell and activate just those URLs that are not activated. I have many workbooks containing many worksheets. The URL references are always located somewhere down in column A after word 'Source:' but can be in the middle of string of text in that row after 'Source:'
View 9 Replies View RelatedI found in an old file that i triggered the macro by clicking a button! I would post a pic but i don't know how. How do I activate a macro by clicking a shape on the excel 2002 page?
View 7 Replies View RelatedI have code that calls a dataform when I click on a command button. Regardless of where I am in the row, the command button is in column A. I want the selected cell to move to column B in the same row so that when the userform displays it will show the correct data. (I have used
Private Sub UserForm_Initialize()
Container.Value = ActiveCell.Value
PONumbers.Value = ActiveCell.Offset(0, -1).Value
SizeType.Value = ActiveCell.Offset(0, 1).Value
Vessel.Value = ActiveCell.Offset(0, 2).Value
'etc
End Sub
to populate my userform.
Can I add something in my call code to also select the cell I want? Or alter the initialization code to start at the beginning of that row?
i'm trying to combine vlookup and activecell here.
based on value that the user enter it'll activate the first cell on the row.
example:
a1:id
a2:1
a3:2
a4:3
b1:name
b2:josh
b3:alex
b4:ray
the user will input the id, and using vlookup i want to find the id and set the first column as an activecell. So for example the user input is 3, i want a3 to be the activecell.
What code can one use to Activate a worksheet on a workbook by using a Cell value on a worksheet.
View 4 Replies View RelatedI am trying to activate a window and the name of the window to be in a cell. lets say: Windows(file2.xls).Active
I want something like this: The name of the file is in B2 cell in tab Sheet1 in file file1.xls so the line will be like:
Windows(.............).Active
i do not know what function to use.
i need a VBA code to activate workbook (which is already opened) with reference to name in cell A1
in Cell A1 is "masterworksheet.xls"