If the cell above the target cell has formula that equals a specified cell, then the target cell displays the value of the cell below that specified cell.
Example: Same formula for F6 and G8, if...
F5 "=A1", so that F6 displays what's in A2, and
G7 "=C3", so that G8 displays what's in C4
I would also be interested in how the formula changes if the target cell equals the cell above, to the left, or to the right of the specified cell.
i have a cell that i have to put a lead time into ( weeks ) ie 7-9 if i type this into the cell it throws up all sorts of things but i want it to display 7-9 trouble is i know i could do ="7-10" but other users use it and wont now that how can i format the cell so it just displays what is input?
View 3 Replies View RelatedI discovered the following Macro (on another site). What I'm attempting to do is make data entry simple by entering a date such as 012209 and have a macro convert the entry to 01/22/09 as a legitimate date field. On entering 012209, the macro displays a value of 09/01/2021 with an actual cell value of 1/9/2021. I expected a value of 01/22/09.
Entering 010109 displays a value of 01/01/2009 with an actual cell value of 1/1/2009. I expected a value of 01/01/09 (I can live with this, just didn't expect a 4 digit year).
I'm working on someone else's spreadsheet, when I type in a formula the cell shows the actual formula as typed, rather than the expected result of the formula, how do Ii correct this?
View 2 Replies View RelatedI'm a novice at macros and spreadsheets and a Visual Basic Virgin!!.
I'm trying to work out how to increase a cell (B17) value from 1 through 5 then jump back to 1 and count to 5 again etc etc.
The value should be incremented every time cell B33 ="Yes" however there needs to be a 2nd event which resets the B33 trigger to operate again.
This is when cell B34 shows "New Race"
=K18+Sheet117!K18
K18 contains the number 54.00, and on Sheet117 cell K18 contains the number 404.00.
Cell A1 displays the formula rather than the result, which should be 458.00.
Other similar formulas I have in this workbook return a result of 0 when I know there should be a significantly higher number. Then, the same formula used to refer to different cells will return what appears to be a proper result.
I am trying to use vlookup so that when each site name is selected the relevant comments for that site are displayed.
I have a formula that is working, but it displays "0" if there is nothing in the cell. How do i get it to display a blank cell if thre is nothing in the reference cell.
this is the formula that i am using:
=IF($C$4="", "", IF($C$4="No Match", "", (VLOOKUP($C$4,Comments!$A$2:$U$295, 5,0))))
The site name appears in C4, and is selected from another sheet in the workbook.
I have a simple formula subtracting one cell from another using =SUM(XX,-XX). When I click on fx and bring up the function arguments box, the formula result is displayed correctly in that box. However, the cell containing the formula will only display a zero. I have tried reformatting the cells to no avail. I have also tried getting a result using =XX-XX and that does not work either.
View 10 Replies View RelatedOften I write the formula in the cell of an excel spreadsheet in vain, it does not work.
Excel only displays the formula in the cell such like = if(B2>2;2;0), and not the result.
Formula is correct, so I don't know why it happens. Most often this occurs when the formula is between worksheets or different excel files on the corporate server.
I am trying to pull 4 cells (Q3:T3) from multiple workbooks into a master workbook. When I run the below macro, I only have the first column of the copied data returned, and can't figure out how to have it paste all four cells.
Sub ExtractData()
Dim wb As Workbook
Dim TheFile As String
Dim MyPath As String
Static CopyCell
[Code] ....
=CONCATENATE(B8,C8,D8) insread showing result just stays as text?
cant figure out whats wrong
How do I change the Excel settings to display in each cell as many characters as fit within the allotted cell space?
To elaborate, in previous versions of Excel that I have used, when a cell contained more characters than could be displayed in the size allotted, for viewing and printing purposes, the cell would simply display (starting at the beginning) as many characters as possible. After upgrading, I have found that when a cell contains more characters than can be displayed, it simply displays the last word contained in the cell.
For example if a cell contains "Frederico Gonzalez & Jose Rodriquez", but there is not room to display the entirety of the message, I would like the cell to display "Frederico Gonzalez & Jo", but the way it is currently displaying is "Rodriquez " with a whole lot of empty space afterwards.
This causes a problem, because it is usually not evident that more information is contained in that cell (unless the cell is selected).
How do I change the Excel settings to display in each cell as many characters as fit within the allotted cell space?
I have tried a simple =CONCATENATE(A1+B1) in a cell and it shows the formula not the value. I have tried
1. Formatting cell to various formats other than text
2. Deleting the Row/Column and adding a new one and trying the same formula
3. Ctrl + ` to show/hide formulas
I dont know why it keeps displaying the formula. Anyone know of a way to fix this?
I have one more question, for now... I am imputing a date into a cell that is too narrow for the date, so the cell outputs xxxxxxx. How can I get around this without changing the cell width.
I am having a difficult time with a calculation. I took over someone else's duty who is no longer with the company. The calculation used did not account for entire columns & the data I need to pull fromhas grown larger than the calculation. When I hit "F2" to manually change the data array, everything works fine until I hit enter and then the result displays as 0.0%. When I hit the insert function button, the result shows as the correct number. I tried copying the format only from an adjacent cell, but this did not work. When I tried to undo my changes, the cell still displays as 0.0%
The original calc is:
=SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$N$2:$N$45998=9,1,IF(cData!$N$2:$N$45998=10,1,0)),0) )/SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$N$2:$N$45998<>"",1,0),""))
The new calc is:
=SUM(IF(cData!$T$2:$T$65536="Internal",IF(cData!$N$2:$N$65536=9,1,IF(cData!$N$2:$N$65536=10,1,0)),0) )/SUM(IF(cData!$T$2:$T$65536="Internal",IF(cData!$N$2:$N$65536<>"",1,0),""))
The calc from the cell below the cell I am working in:
=SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$O$2:$O$45998=9,1,IF(cData!$O$2:$O$45998=10,1,0)),0) )/SUM(IF(cData!$T$2:$T$45998="Internal",IF(cData!$O$2:$O$45998<>"",1,0),""))
I have a list of names in a column that will be changing on a weekly basis (with some names repeating). I need to create a Named Range that only counts unique values from that list of names (dynamically changing every week).
View 11 Replies View RelatedThe following code is allowing me to stop or go ahead and delet a value.
If value deleted then msgbox value deleted sucesfully.
The problem now is that if I press cancel i still get msgBox for valur sucesfully deleted even though value has not been deleted.
What do i need to change in the code?
Code:
Private Sub CB3_Click()
Dim v
v = InputBox("Enter a new version number")
Range("A1").Value = v
Dim Found As Range
[Code] .....
Why does a cell formatted as "text", display ### but shows the actual words when formatted as "general?"
View 13 Replies View Related=IF(D9<>"",IF(E9=TRUE,S5*0.46,TRUE)+IF(E9=FALSE,S5*0.3,TRUE))
If D9 is blank this formula displays FALSE, I need it be o or - instead of FALSE.
I have about 1000 links (to files on a server) in my Excel 2007 spreadsheet. I would like to edit them all at once so the word 'link' is displayed but the link stays the same. I can do it for each entry, but have no idea how to do it all at once - is there a way?
View 6 Replies View RelatedI have a macro that computes the unique values in a column. I'd like to create a message box that displays the result of the macro.
View 9 Replies View RelatedThe result of my formula should be blank, but 1/1/1900 appears instead and I can't get rid of it. Does anyone know why or how to fix. I can't just change the font color as it screws up other formulas.
=IF(ISNA((VLOOKUP(VendorTracking!$P10,LeadTimeVlookup,2,FALSE))),"",VLOOKUP(VendorTracking!$P10,LeadTimeVlookup,2,FALSE))
In this case the Vlookup is referring to an apparently blank cell with no formula in it. I googled 1/0/1900 and saw a few references that said formatting a cell with zero in it as a date would cause this result, but there is no zero in this case.
My VLOOKUP formula is displaying in the cell instead of the result. The formula is VLOOKUP(A1, income_codes, 2, FALSE) and in the formula editor the result (00017) is calculated correctly.
However the cell displays =VLOOKUP(A1, income_codes, 2, FALSE) instead of the answer 00017.
My view options are not set to display formulas. The codes are formatted as text in the range income_codes as they start with zeros.
I have searched and found a lot of references to the web browser control for a user form. I have tried and tried but all I get is a blank webbrowser control.
I have tried the navigate and navigate2 methods and other stuff that you can see that I have commented out. Also, I tried placing the line with the navigate method both before and after the userform.show method. But all I get is a blank web browser on the form.
Here is what (sort of) I have tried:
VB:
Sub ShowTheForm()
'Dim myPerm As Office.Permission
'Set myPerm = ThisWorkbook.Permission
[Code]....
So, what's the trick. All the stuff I found searching the web implies that what I have above should work.
i have a username and password textbox and i want to know when i enter a correct username the textbox it is in turns green and when wrong it will turn red, here is the code i have so far im not very experienced but know bits and pieces.
Code for txtpassword.text
I have MS Office 2010 Home Edition. Is there a way to make 2 different Excel docs show up on 2 different monitors at the same time (one on each, of course)? (I have a PC and 2 displays total.)
View 3 Replies View Related[Code] ....
But it doesn't show the correct sheet after running it.
I need it to show the sheet called "Invoice with code".
I need to have a footer that displays the file name in the chart area so that it will copy with the chart when I paste into a word document.
View 1 Replies View RelatedIf the percent in a cell is more than 10% less than another cell I would like it to turn red. I would like the cell to turn yellow if the percent in that cell is within 10% below the percent in another cell, or if the percent is greater than that of another cell I would like the cell to turn green. How do I do this?
To clarify; If cell a1 is 20% and Cell a2 is 21%, I would like the color in cell a1 to turn yellow since it is less than 10% below cell a2. OR if cell a1 is 25% I would like it to turn green since it is greater than cell a2. OR if cell a1 is 10% I would like it to turn red since it is more than 10% below cell a2.
I've looked at conditional formatting and it does not seem to apply, this seems like it would need an if function combined with conditional formatting.
Is it possible to format a textbox on a userform so that it displays as time?
View 1 Replies View Related