I have MS Office 2010 Home Edition. Is there a way to make 2 different Excel docs show up on 2 different monitors at the same time (one on each, of course)? (I have a PC and 2 displays total.)
View 3 RepliesI believe that someone showed me once that you could view the same workbook on two monitors with the vien arrange all mode, you could make changes on both screens and the changes would be saved to the same file similar to arranging two views. I cannot rememebr how to do this or even if it is possible.
View 5 Replies View RelatedI'm used to work with the Excel 2003 edition, however I just changed the version to 2010. As result of that I do have the following question:
How can you view the source data of a pivot table in Excel 2010?
I'm using Excel 2010. I have a workbook with only 1 worksheet in it and it will be sent to several people. I want that excel file to open in Full View when the end user opens it. Is this possible without any VBA codes?
View 2 Replies View RelatedI'm using Excel 2010. I have a spread sheet with sales data covering 3 years and multiple customers. I was able to create formulas such as this to calculate the figures for the entire sheet (all customers) by year.
=SUMIFS(J2:J12904,E2:E12904,">12/31/11",E2:E12904,"<1/1/13").
I believe that in order to use filters that show this date for a specific customer I need to convert this to a SUMPRODUCT formula, I've tried this multiple times and had no luck.
why a person such as myself cannot have two or more Excel Docs on the screen side by side at the same time? And if it can be done, how do you do it?
View 9 Replies View RelatedExcel 2007 - need to adjust protected view settings but the protected view tab is missing from my Trust Centre settings - have the following tabs - trusted publisher / location, add-ins, activeX, macro, message bar, external content and privacy options. Document is a revenue authority download and without being able to adjust the protected view settings, can't input data.
View 3 Replies View RelatedI am having problems opening Excel documents on first try. If I double click a excel doc icon it will start excel, hang for about a minute and a half then just display a excel blank doc. If I then go back to the original doc icon with excel still open and double click it again the document appears.
View 9 Replies View RelatedI have used MS Office Excel 2003 for many years without difficulty in XP. Suddenly I find I can't open many of my old documents. I get a message,"Microsoft Office (InfoPath2003) cannot open (the following file, etc.) A second message says, "The form contains XML that is not parsed: An invalid character was found in the content. Line 0, Position 0" Then I get the message "MS Office is not currently set as default." I complete the instructions that follow and it is now corrected but I continue to get the same error messages.
View 2 Replies View RelatedSome of my Excel files work perfectly in terms of undo/redo, while others simply cannot use that feature. I took a stroll through the internet looking for the answer, but the issues that I found seemed to point to the application losing its ability, which was resolved with a registry edit/update/change. I don't think that's the case here because I CAN undo is SOME documents.
After some investigation with my problem documents I have found that THIS Macro is the one thing all my undo-free documents have in common: [URL]
I have about 600 Word Documents that contains information about clients. Each Word document file name is the name of the client. Example. Tom Smith. I wanted to be able to highlight all 600 word documents and paste them into Excel, so that I can press Ctrl-F to find what ever name it is I'm looking for, then click the name and the word document open. Is this possible?
View 2 Replies View RelatedHow I can merge multiple word documents based on checkboxes selected on Excel.
Specifically, I have some 75 checkboxes found on Column F with linked cells on Column G (for example, checkbox1 place on Cell F1 linked to Cell G1). Each of the checkboxes have a corresponding Word document (containing text and tables about 1 to 4 pages in length). Based on what checkboxes are selected, I'd like to have those corresponding Word documents merge together and create an entirely new Word file (for sake of order, the datapoints from each selected Word document should be placed at the beginning of a new page in the new file).
The user will eventually name and save the new file on their own.
I'm not familiar with the required code as well as where it should be placed (whether on the excel file that contains the checkboxes, on the individual word documents that are eligible to be merged, or parsed out on all files).
Often I write the formula in the cell of an excel spreadsheet in vain, it does not work.
Excel only displays the formula in the cell such like = if(B2>2;2;0), and not the result.
Formula is correct, so I don't know why it happens. Most often this occurs when the formula is between worksheets or different excel files on the corporate server.
Basically I have manually generated word documents based on a spreadsheet. Now, I need to countercheck the contents of the word documents with another spreadsheet i.e. make sure the courses in the word document for a particular student is same as that reflected on the spread sheet. Is it possible to write a macro for this? I'm a beginner and I'm waaay out of my depth. I have attached sample documents and spreadsheets.
The link to the documents are as follows: Macro to check data from Word documents against an excel spread sheet
I have 3 Excel files open. There's one unnamed file that I can open in the background with no problem. Then I have 2 data files. I'd like to be able to view them both at the same time, side by side, but for some reason I cant. They both seem to occupy the same window. Every time I goto the task bar and try switching windows they occupy each other's window. Is there a way to view files side by side?
View 2 Replies View RelatedI have got a table, with a range B1:CC200. I have been able to run a macro which pops up a form and shows the particulars of a selected month corresponding to those in the table. (e.g., say entries in column D pertaining to say, March 2012 are shown in the form). Problem is I want to be able to update the entries using the form, but no no success. Am quite new to vba but the code I tried to use on the command button after updating is shown below
Private Sub CommandButton1_Click()
TextBox1.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B2:CC2"))
TextBox2.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B3:CC3"))
.
.
.
TextBox20.Value = Application.Lookup(Range("A1"), Range("B1:CC200"), Range("B20:CC20"))
Unload Me
End Sub
Where A1 is the month in question, B1:CC200 the range of the database and row B2:CC2, and B3:CC3...., B20:CC20the data I need to update. .
I have hide workbook in view and hide option, when i unhide the same it should ask password. Is it possible.
View 1 Replies View RelatedI have a large spreadsheet from which I need to create separate Reports by hiding various rows and columns. I have followed instructions for creating a couple of Custom Views (View tab, Custom Views, Add, Inserted Name, OK, Saved the document) but nothing happens apart from getting the message "Some view settings could not be applied". In fact none of the view settings were applied.
View 1 Replies View RelatedHow can I view hidden characters inside an excel cell. I have an excel file that I receive from our vendors. After verifying the data, I save the file as a tab delimited .txt format. When I open the .txt file I see some data with " " at both ends. i.e. "800 North Ave. Suite A". The thing is I don't see the " " in excel. This tells me that these are non-printing characters.
View 4 Replies View Relatedwhat I would like to do is view a cell result in my userform with out deleting my formula
It works perfect from the excel side but I just cant get it right from the user form side
Ok so cell D6 contains a vlookup formula. I want the vlookup result to appear in my userform. I can get this to work but it overrides the vlookup formula with the result. This means that when I go to use it again it just shows the same result.This is what I have:
Cell D8 has a Combobox with a list of names to select from
this is the formula in cell D6 =VLOOKUP(D8,B107:I754,2,FALSE) This retrieves the selected customers account number from the combobox. I need my userform to display the account number with out erasing the formulas because I will need to search for more account numbers after.
I have named the textbox in my userform Customeraccountb
In an effort to manipulate the xml documents within an xls, you used to be able to change the extension to .zip then open. This no longer works for me, just getting the 'cannot open file: it does not appear to be a valid archive.
I have tried it with a number of different files, but no joy.
It still works with a .doc so I guess it's not that Microsoft have stopped this capability?
Using Excel 2007
My pallet lost color-coding - if I hover over each little scare it displays the names for the colors and if I click on them they color the cells with the right colors, but the palette itself lost the visual display of colors except for 8 colors: black, blue, red, magenta, yellow, cyan, and white.
I use color-coding of cells a lot and I find it difficult to work without visual clues. At least the hover-support allows me to get the work done, but with difficulty.
I am trying to send bulk emails from my excel 2010 - however I am getting a POP UP. find the screen shot in the enclosed word document So every time a new mail is sent from excel we need to press the button allow Is there a way where I can turn off this warning.
View 6 Replies View RelatedI have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value
[Code] ........
I am trying to adjust the below macro so that it will work in Excel 2010.
Sub OpenAndProcess()
Dim fs As FileSearch
Dim I As Integer
[Code]....
This code will take the value of the active cell (which is a filename) and open the corresponding PDF document of the same name.
Sub OpenPDF()
Dim fName As String
Dim fExt As String
Dim fPath As String
Dim fFullPath As String
fName = ActiveCell.Value
fPath = "M:Books"
fExt = ".pdf"
fFullPath = fPath & fName & fExt
ActiveWorkbook.FollowHyperlink Address:=fFullPath, NewWindow:=True............
I receive a Weekly list; let’s call it “Doc1” with a load of order numbers in column A. I then have another excel document, lets call it “Doc2” also with order numbers in column B.
Is there a way to see if an order number in Doc1 already exists in Doc2; perhaps change the font colour to red for example (in Doc1 only)? I don’t want to affect Doc2 in any way I am not allowed to alter it at all.
I have tried a simple =CONCATENATE(A1+B1) in a cell and it shows the formula not the value. I have tried
1. Formatting cell to various formats other than text
2. Deleting the Row/Column and adding a new one and trying the same formula
3. Ctrl + ` to show/hide formulas
I dont know why it keeps displaying the formula. Anyone know of a way to fix this?
I have one more question, for now... I am imputing a date into a cell that is too narrow for the date, so the cell outputs xxxxxxx. How can I get around this without changing the cell width.