I'm a novice at macros and spreadsheets and a Visual Basic Virgin!!.
I'm trying to work out how to increase a cell (B17) value from 1 through 5 then jump back to 1 and count to 5 again etc etc.
The value should be incremented every time cell B33 ="Yes" however there needs to be a 2nd event which resets the B33 trigger to operate again.
This is when cell B34 shows "New Race"
I have a test due in the morning, and I really need this question answered ASAP, if anyone could. I need to create an IF formula for this situation: the standard Mhz is 500. Give 55.00 for that standard. But for every increase of of Mhz, give 25.00 per 100 increase.
View 2 Replies View Relatedi have a cell that i have to put a lead time into ( weeks ) ie 7-9 if i type this into the cell it throws up all sorts of things but i want it to display 7-9 trouble is i know i could do ="7-10" but other users use it and wont now that how can i format the cell so it just displays what is input?
View 3 Replies View RelatedI discovered the following Macro (on another site). What I'm attempting to do is make data entry simple by entering a date such as 012209 and have a macro convert the entry to 01/22/09 as a legitimate date field. On entering 012209, the macro displays a value of 09/01/2021 with an actual cell value of 1/9/2021. I expected a value of 01/22/09.
Entering 010109 displays a value of 01/01/2009 with an actual cell value of 1/1/2009. I expected a value of 01/01/09 (I can live with this, just didn't expect a 4 digit year).
I'm working on someone else's spreadsheet, when I type in a formula the cell shows the actual formula as typed, rather than the expected result of the formula, how do Ii correct this?
View 2 Replies View Related=K18+Sheet117!K18
K18 contains the number 54.00, and on Sheet117 cell K18 contains the number 404.00.
Cell A1 displays the formula rather than the result, which should be 458.00.
Other similar formulas I have in this workbook return a result of 0 when I know there should be a significantly higher number. Then, the same formula used to refer to different cells will return what appears to be a proper result.
I am trying to use vlookup so that when each site name is selected the relevant comments for that site are displayed.
I have a formula that is working, but it displays "0" if there is nothing in the cell. How do i get it to display a blank cell if thre is nothing in the reference cell.
this is the formula that i am using:
=IF($C$4="", "", IF($C$4="No Match", "", (VLOOKUP($C$4,Comments!$A$2:$U$295, 5,0))))
The site name appears in C4, and is selected from another sheet in the workbook.
I have a simple formula subtracting one cell from another using =SUM(XX,-XX). When I click on fx and bring up the function arguments box, the formula result is displayed correctly in that box. However, the cell containing the formula will only display a zero. I have tried reformatting the cells to no avail. I have also tried getting a result using =XX-XX and that does not work either.
View 10 Replies View RelatedOften I write the formula in the cell of an excel spreadsheet in vain, it does not work.
Excel only displays the formula in the cell such like = if(B2>2;2;0), and not the result.
Formula is correct, so I don't know why it happens. Most often this occurs when the formula is between worksheets or different excel files on the corporate server.
I am trying to pull 4 cells (Q3:T3) from multiple workbooks into a master workbook. When I run the below macro, I only have the first column of the copied data returned, and can't figure out how to have it paste all four cells.
Sub ExtractData()
Dim wb As Workbook
Dim TheFile As String
Dim MyPath As String
Static CopyCell
[Code] ....
=CONCATENATE(B8,C8,D8) insread showing result just stays as text?
cant figure out whats wrong
How do I change the Excel settings to display in each cell as many characters as fit within the allotted cell space?
To elaborate, in previous versions of Excel that I have used, when a cell contained more characters than could be displayed in the size allotted, for viewing and printing purposes, the cell would simply display (starting at the beginning) as many characters as possible. After upgrading, I have found that when a cell contains more characters than can be displayed, it simply displays the last word contained in the cell.
For example if a cell contains "Frederico Gonzalez & Jose Rodriquez", but there is not room to display the entirety of the message, I would like the cell to display "Frederico Gonzalez & Jo", but the way it is currently displaying is "Rodriquez " with a whole lot of empty space afterwards.
This causes a problem, because it is usually not evident that more information is contained in that cell (unless the cell is selected).
How do I change the Excel settings to display in each cell as many characters as fit within the allotted cell space?
if it is possible to increase one cell by 1 when the date was changed in another cell. I installed the code that was given to me and it worked perfectly, thanks agin JB and royuk, UNTIL the cell that was to increase by 1 was locked and the sheet protected.
The date cell is not locked.
I need to increase the cell value on a spreadshhet that contains over 50,000 cells. I know how to do this on a cell by cell basis. I need to know if there is some way of doing this to multiple cells. Here is my example;
$603
$712
$649
I need to increase each cell value and roundup to the next number. I have been doing the following formula: =ROUNDUP(603/.97,0) to increase the cell value to $622.
If a cell is not blank, then increase that amount by a percentage identified in another cell and display the value only without any formalas in a new cell. To this end I wrote this IF statement:
=IF(I2>0,CP9=(CA9*I2/100)+CA9,CP9="")
Observation: I see a FALSE in CS9 where this IF statement exists, however, CP9 does not display the required value.
Is it possible to have a cell increased by 1 and another decreasing by 1 in a simple cell formula.
E.g.: I have an inventory stock sheet that is very simple. I have a maximum stock column C, a stock on hand (available) column A and a stock sold column B.
Every time I sell an item and punch it into column B it should automatically decrease the amount in column A by the number that I punch into B.
I am not concerned about the maximum stock column but would like an easy formula just to work out the amount that I have available so I know when to order more stock.
So when I punch in a 5 on B2 it should decrease the value of A2 to 1. And when I purchase stock again and I punch in say a 5 on A2 it should decrease B2 to a 1.
****A* B *C
1 *2 *4 *6
2 *4 *2 *6
3 *8 *6 *14
4 *0 *6 *6
How can I get one cell to increase by 1 after I change the date in another cell. The spreadsheet is used to keep track of Oxygen Bottles at the local Fire Dept. and I want the " Times Filled" cell to increase by 1 after the " Date Filled" cell is changed. I'm not sure if they key the date in or if they use a calender add-in pop up.
View 5 Replies View RelatedI'm trying to sum a range in Column AB that increases by 1 cell every day.
Specifically, Jan 1 will be AB1, Jan 2 will be SUM(AB1+AB2), Jan 3 will be SUM(AB1:AB3)...and so on...Dec 31 will be SUM(AB1:AB367).
If it helps, the dates of the year run from A2:A367.
I created a small block of cells on my worksheet where i have in separate cells, the day of the week, the days date and the month. I want to design a special memory calendar for my mom in early stages alzheimers.
There are cells with specific info which i do not want to re type for the whole month/year.
I want to be able to copy all the info into another block of cells and have the day of the week and date change also the month.
I need a formula that can work out a percentage increase or decrease from cell J2 to L2.
J2 is the current data with L2 being the previous data - so the formula would compare J2 with L2 and tell me if there is an increase or decrease shown as a percentage.
The figures fluctuate from month to month so they could be either an increase or decrease. There are over 300 entries so I can't go through each one adjusting the formula accordingly - this is why I need the formula to do the working out if it is up or down.
I have a simple spreadsheet. A value is inserted in cell B4.
I want to increase that value or decrease it by adding a button in the next cells, C4 or D4, to increase and decrease that value instead of manually typing in the new value.
I have to reference to another sheet a fixed increase of moving 6 rows across. What would be the formula for it?
For example.
First formula would be =Sheet1!A1
What would be the formula for the subsequent cells. (eg. =Sheet1!A1+6) obviously doesn't work.
Is there a function in VBA that lets me increment or decrement the number of decimals of a particular cell? let's say i got a cell value of 7.123456 but excel only displays 7 on the cell. What if i want excel to display only 7.123? How can I specify the number of decimals i want on a particular cell (in this case 3)
View 2 Replies View RelatedI'm trying to track how complete a project is by checking if cells contain data, and if they do the percent in cell 'Y4' would increase.
I have 6 cells which represent milestones and if they contain data then they would add a certain percent to cell 'Y4'.
Cells B13 & R13 would have a weight of 15% each
Cells J13, J21 & J30 Would have a weight of 20%
Cell L34 would have a weight of 10%
Is there any way that if these cells contained any data that I could add that percent to the total in 'Y4'?
I have a macro that increase a cell number and one that decreases a cell number, heres my code:
Code:
Sub Macro1()
Dim t
t = Split(Worksheets("Sheet1").Range("d5").Text, "/")
t(0) = Format(t(0) + 1, "0")
Worksheets("Sheet1").Range("d5") = Join(t, "/")
[Code] .......
So they do exactly what i want them to do but i want to put a limitation on them, so say the number in the cell is 0 then i dont want it to be able to subtract from it anymore, and say the number is 20 i dont want it to be able to add any more, i tried to put if statments into the code but no luck.
i'm looking for a loop macro to perform the following task:
Sheet 2 is my look up table, and sheet 1 as a number of references such as:
='Sheet 2'!B1
='Sheet 2'!E1
='Sheet 2'!G1 etc
I need a macro that increases the row references "1" to "2", saves the sheet then increases "2" to "3" and so on until the bottom of the reference table is reached
I don't know if I am asking for something impossible,but is it possible to create a MACRO to automatically add or subtract 10 to whatever number is in the cell? for example:
A1= 20
I would like to have a macro that lets you either add 10 to it to become 30 or subtract 10 to it to become 10.
I have 22-08-08 in Cell A2 I would like it to change to 22-09-08 on 23-08-08 ideally using edate (but not neccessarily).
Perhaps I can add a formula with conditional formatting eg formula is = "On Today()+1 Add 1 month to cell A2"
I have a 49 numbers in cell A1:AW1 they are not in acceding order. I want to separate all groups start from lowest number to highest giving them deferent color. As shown in example table below in cell (A2 start with nš 6 and increase up to nš 47 till cell F2 =yellow color) then Cell (G3 decrease nš 3 and increase up to nš 49 till cell L49=Green Color) and continue same process for rest ....
View 9 Replies View RelatedI have a range (M6:BM6) which consists of week end dates = every Friday (M6 =
5/8/09; BM=5/7/10). I would like to have the range adjusted based on when a
cell (B3) is updated. For example, currently B3=5/5/09 and M6=5/8/09 (week
end date of B3). If B3 was updated to 5/12, I would like to have the range
automatically updated to M6=5/15/09, N6=5/22/09....BM=5/14/10. I could do
this with excel formulas in the sheet but would like to macro code adjust the
values in the range rather than formulas.
These ranges are used in other macros and works better with values rather than formulas.