Cells Range Reference Not Working Properly
May 25, 2009
I often have problems with the cells range reference method. For some reason I get an error and can't tell why. Other times it works fine. Is this just an unstable method to use or is this completely wrong? I'm assuming I am using the wrong syntax. It is definetly the range reference causing the problem.
Dim cnt1 as integer, cnt2 as integer,cnt3 as integer
cnt1 = 2
cnt2 = 50
cnt3 = 2
dim myrange as range
set myrange = sheets("sheet1").range(cells(2,cnt1), cells(cnt2,cnt3))
I have no idea why it won't work. I'm basically searching a columner range of cells.
View 2 Replies
ADVERTISEMENT
Jan 8, 2013
Had been using this formula for almost 3 years, recently the formula didn't work properly as the range goes down halfway only instead of to the last data in the column. I'm using Excel 2010 now.
=Sheet1!$A$2:INDEX(Sheet1!$A:$A,COUNTA(Sheet1!$A:$A))
View 2 Replies
View Related
May 30, 2013
Total amount in Column B should same as shown in Column F
=IF(E3<>"",SUM(OFFSET($C3,ISTEXT(E3),,,1):C3),"")Above formula is calculating always two rows.
View 2 Replies
View Related
Apr 10, 2009
I have problem with vlookup. I am attaching my file.
View 3 Replies
View Related
Sep 3, 2013
I am including an attached file for reference.
The file is sorted A-Z, but if you scroll down towards the bottom, you will see that some values are out of order. Both instances of University of Central Florida and University of North Dakota are out of place.
University of Central Florida should be between University of California and University of Colorado.
University of North Dakota should be between University of Colorado and University of Southern Mississippi.
View 1 Replies
View Related
Feb 5, 2009
I have a really strange problem i have two different hard directories o: & u:
i have the following code linked to a command button
chdir "U: foldername foldername foldername"
saveactiveworkbook.saveas range("c9")
View 6 Replies
View Related
May 25, 2006
I try the following selection
Columns("B:AF").Select
Selection.ColumnWidth = 2.3
It is selecting columns a to af. Why would take column a if it is not part of select?
Sub Add_worksheet_month()
Dim Lst() As String
Dim I As Integer
Dim wname As Date
'Dim wmonth As Date
View 4 Replies
View Related
Nov 15, 2008
I am trying to work out an excel workbook for calculating family recipes. I have gotten most of it figured out but am having a problem with one thing. When the serving size of an item is 8 oz & the recipe calls for 14.5 oz the only way I can get it to work properly is to enter 1.75 in the serving size.
But I would like (actually need) to be able to enter the 14.5 and have it calculate the calories correctly - since sometimes the amount to be added to the recipe may be 15 ounces and the serving size is 8 ounces etc....
View 6 Replies
View Related
Oct 7, 2009
I have a rank formula that is seemingly erroring out on certain cells - indiscriminately. I have tried and tried to figure this out for myself but this is beyond my knowledge.
Only on some cells is the rank not working and returning a "-" (the error result).
I want the rank to use absolute numbers, so that it will rank according to variance or percentage (regardless of +/-). I am also using another cell (R1) to tell the rank what column to use.
As you can see there are a few entries, both + & -, that are not being included in the rank - for reasons beyond me.
View 8 Replies
View Related
Oct 25, 2009
I have 6 categories that need to be ranked 1-6 in order of highest number of occurances. My ranking formula is showing 1-7, missing number 3. I have attached a sample worksheet further showing what I am trying to explain. I need cell A3 to show a ranking of "3". Currently it shows "4". What am I doing wrong??
View 4 Replies
View Related
Jan 29, 2009
I have a form with 2 buttons and a frame. Inside the frame I have another button. I get a Type Error Message when I run the code and I don't understand why.
View 3 Replies
View Related
Jun 22, 2009
I have the following two codes on a userform, The first code performs two steps:
The first step is running the second code (MyDate), which is used for checking the entries in the userform textboxes and if there is any wrong entry a message box appears then it exits sub.
However, what happens when it finds any wrong entry is that it displays the msgbox and instead of exiting sub as it is requested in the (MyDate) code, it resumes running and moves to the second step and adds 1 to ComboBox1 ListIndex.
View 4 Replies
View Related
Apr 2, 2007
I am in the process of converting my programs over so as not to use these and I am already seeing a drastic difference in speed.
I have run into a problem that I need help with. I have a spreadsheet similar to the example below. The first column contains a list of college majors and after each major is a row of classes that are required by that major.
A25346 ENG101 MAT115 PSY150
A35678 ENG111 MAT115 SOC101
A23456 ENG101 MAT116 HIS201
The first thing I need to do is search down the first column for the major. Once the major is found I need to search across the row for the class. I am having trouble searching across a single row for the class.
Here is the section of code where I experience the problem
Set rMajor = wsMajor.Cells.Find(What:=Major, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False)
If Not rMajor Is Nothing Then
majorrow = rMajor.Cells.Offset(0, 1).Value............
View 9 Replies
View Related
Feb 21, 2013
The code below is supposed to insert a column and rename it. However, when I debug, the code only renames the column, it does split or run the loop. I press debug again, and then code executes as it is intended.
I can't explain why I have to press debug twice for in order for the code to work properly.
Code:
Sub renameColumns()
With Sheets("byPosition")
Columns("E:E").Select
Selection.Insert Shift:=xlToRight
.Range("E1").Value = "Exemption"
.Cells.EntireColumn.AutoFit
[Code] .......
View 2 Replies
View Related
Jul 13, 2006
I've been working on a particular spreadsheet and I've just noticed that
double clicking the format painter will only format one cell. It won't
retain the format to be put into the next selected cell which it should when
its double clicked. The same goes for copy and paste. Normally once you've
copied something you can paste it into a number of cells individually, one
after the other, but after the first paste selection, the paste option is no
longer available. I can't see any settings under options to fix this. What has happened, and how do I fix it? (I'm using Excel 2003 SP1 - is there a SP2?)
View 2 Replies
View Related
Oct 31, 2011
I am using the find function to establish the row number in a spreadsheet for an edit process.
Code:
wks.Range("B:B").find("something").Row
the cells in Range("B:B") are linked to another worksheet. If I copy paste values on the cells in Range("B:B") the code above works a treat.
View 4 Replies
View Related
Oct 12, 2012
I thought I had been able to use array to have more than two criterias with Autofilter, but now I am unable to make the following code work. What I am trying to do is have all the records that does not contain either N/A, S/O or xx and also have a filter on column 125 for the value "OUI".
VB:
Sub test()
Set ws1 = ThisWorkbook.Sheets("SOMMAIRE_EN_ALL")
Set ws2 = Workbooks("Fichier_central_2013_anglais_2_CLEAN").Sheets("DETAIL_CONCAT")
Set r = ws2.Range("A1:du4783")
[Code] .....
View 3 Replies
View Related
Apr 13, 2014
In the attached sheet, one macro is developed which is not working properly. My req is to convert date from dd-mon-yyyy to yyyy/mm/dd format. (23-jan-2010--> 2010/01/23)
If incomplete date is there, then hyphen should place the gap i.e.
For date like APR-2014------> Output should be 2014/04/--
For date like 1998 -----> Output should be 1998/--/--
The below macro works only for row number 11, 15 and 16.
[Code]....
Attached File : date.xlsm
View 5 Replies
View Related
Jul 1, 2014
I'm using the following code to try to ensure a value is entered into a text box, but when I click over to the next text box skipping the first one entirely, I don't receive any message indicating the previous box is empty. I'm trying to make it so certain fields are required and others are optional. Here's the code I'm currently using:
[Code] .....
View 14 Replies
View Related
Jul 23, 2012
I have entered a custom sort order under 'first key sort order,' but the field is not sorting according to the list.
I'm sure I entered the list correctly, because I actually entered it a long time ago, and it was working for a while. However, today the underlying data was temporarily erased, and the pivot table, when refreshed, basically went blank. I restored the data and refreshed the table, but this field is back to sorting in the wrong order. Refreshing the pivot table and re-choosing the appropriate sort options do not work.
View 1 Replies
View Related
Jul 14, 2014
Is it possible to reference a cells value to define a range reference?
[Code] ......
I am trying to define the row value in the range reference with a value in a secondary cell?
View 3 Replies
View Related
Sep 13, 2008
I've worked with Excel for many years and have just begun writing VBA in Excel 2007, so I am really stumped by this:
SR = 1
SC = 1
TR = 40
TC = 2
Worksheets("ChartData").Activate
' Works
ActiveSheet.Range("A1:B40").Select
' All of the following Fail w/1004 Error
ActiveSheet.Range(Cells(1, 1)).Select
ActiveSheet.Range(Cells(1, 1), Cells(40, 2)).Select
ActiveSheet.Range(Cells(SR, SC), Cells(TR, TC)).Select
At first I thought I had a bad install,
but this is happening on two manufacturer installed systems...
And I seem to be following the documentation for the use of Range with Cells.
Am I missing something?
View 9 Replies
View Related
Oct 14, 2006
how i can display different values using the Selection.FormulaArray, ok look at my
Dim mySheet As Worksheet
' On Error GoTo errors
Dim x As Integer
x = TextBox1.Text
Dim y As Integer
y = RefEdit2.value
Set mySheet = Excel.ActiveSheet
mySheet. Range(RefEdit1).Select
Selection.FormulaArray = "=multiplie_value(""" & x & """, """ & y & """)"
MsgBox Selection.FormulaArray
Now the function i call:
Public Function multiplie_value(valor As Integer, multiplo As Integer) As Integer
multiplie_value = Val(valor) * multiplo
End Function
thats an example. so the real question is i create a form, the user enter some values to search to a database, the user select an area(a range) where they want the data to be display, but i dont how to display that info that is coming from the database in the range that the user selected. The info displayed in the range should look like a tabular report, column headers, etc.
View 9 Replies
View Related
Jun 27, 2012
I have a 'receipt' worksheet with about 500+ lines of data, here is an example of what could be in cell A166: 1.1 NET_AMOUNT 742,523,253.83
In another worksheet, is there a way to look at the whole worksheet for column A in receipt to say:
if 1.1 is true, capture text to the right of 'NET_AMOUNT' then format using =Dollar?
View 9 Replies
View Related
Aug 5, 2008
I have some columns of data that won't get perfectly aligned. The numbers in all the cells are right aligned but the numbers in some of the cells are a few pixels to the left compared to some other cells that appear to be properly right aligned.
I have attached a screenshot if my explanation isn't clear.
View 3 Replies
View Related
Nov 20, 2012
I've been trying for a while not to reference a range of cells in closed workbooks to create an ongoing automatic log.
I've attached a test log with the details required and the cells are staggered, I have been using the formula;
='NETWORKPATHFOLDER[121113 12.42.xls]Enquiry Form'!$G$1
then the cells are (SAME PATH) J1, A5, A7, A9, A11, A13, A15, A17, A19, A21, A31, B31, E31, J31
and the attached test will placed then in that order under their respective headers.
So, all in all, is there a VBA code where it can run it from closed workbooks in the order above?
log text.xls
View 1 Replies
View Related
Oct 22, 2009
I have a workbook where one tab contains the data that I am given:
Project-A data1 data2 date1 date2 date3
Project-B data1 data2 date1 date2 date3
Project-C data1 data2 date1 date2 date3
Project-D data1 data2 date1 date2 date3
In another tab, I have a report where a row containd the project name, and I want to find the maximum value of the dates in the ither tab, where my project name matches the project name on the tab data I am given.
So, if I have "Project-C", I need to know the max of the dates in the row for Project-C; but I dont know what row that will be on in the other tab. For info such as 'data1' I have been simply using vlookup using the project name as a key.
View 7 Replies
View Related
Jul 15, 2014
Using VBA, I am importing data from Access (Access2007) into Excel. The code that I use works as required but I need to refine it so that I can filter for the records that I need to import. I can import ALL records. I can import selected records by manually changing my SQL query. I would like to reference an array of values or a range of cells so that I do not need to manually change my query every time I want to run it.
[Code].....
This code gets all records for "Jeff" and "Bob" from the Access database. I need to query about 100 names at a time so manually inputting them is going to take forever. How I can make it work?
By using an array:
[Code].......
or
by using a range of cells:
View 8 Replies
View Related
Dec 22, 2008
I have a loop that executes roughly 7.7 million times when my VBA program runs. Neednless to say it take a long time to run - usually a couple days.
The inner-most loop contains a line of code from way back in my early vba programming days when I knew even less than the small amount I know about programming now (and if you can follow that sentence you might be able to understand some of the spaghetti code I write :-) ).
for k = 1 to n
if Worksheets("Personell").Range("D" & Trim(Str(k))) > dtCompleted then ...
Would it be faster to use this syntax (which I just found out about):
if Worksheets("Personell").Cells(k,4) > dtCompleted then ...
It would cut out 2 functions calls, trim() and str(), so it would be faster, right?
I am almost embarassed to post the Range("D" & Trim(Str(k)) line of code because it looks so convoluted now, but that's how I learned to program, just fumbling through until it ran...
So in short, I just wanted to confirm that the cells() syntax run faster before I spend an hour editing and tested.
View 9 Replies
View Related
Mar 8, 2013
I have a data that is split into multiple cells and needs to concatenated. Unfortunately, the number of columns wherein lies the data varies throughout the workbook. As such, I wanted to select a range of cells, define this range as the reference point for the macro, run the macro, then move on (selecting a different number of columns on the next try).
For example, I have this:
A
B
C
D
E
1
No
Not Very Far
[Code] .....
I want to select cells A1:B1, run a macro concatenated the two columns, then select cells C1:E and run the same macro to get this:
A
B
1
No
Not Very Far
[Code] ........
So far, I have this:
Code:
ActiveCell.Columns("A:A").EntireColumn.Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
ActiveCell.Offset(5, 0).Range("A1").Select
ActiveCell.FormulaR1C1 = "=CONCATENATE(RC[1],RC[2])" '
View 9 Replies
View Related
