I'm using the following code to try to ensure a value is entered into a text box, but when I click over to the next text box skipping the first one entirely, I don't receive any message indicating the previous box is empty. I'm trying to make it so certain fields are required and others are optional. Here's the code I'm currently using:
[Code] .....
I have five text boxes on a user form. I would like the 5th box to always equal 100 - the Sum of the other boxes, and never go below 0.
In other words, the text boxes are representing percentage breakdowns - so to validate the percentage entry in each box i want the last box to 'count down' from 100 as the percentages are distributed amoungst the other boxes. This box will also be a percentage figure, so is crucial it has its own box (rather than just saying these four boxes have to total 100) i hope this makes sense!
I have tried a code along these lines (see below) - (adapted from this forum but couldnt get it to work) I also found a version where one poster used a command to change the 'value' from string to numbers - but have been unable to find that again.
Private Sub txtbox1.change()
txtbox5 = 100 - (CCur(txtbox1) + CCur(txtbox2) + CCur(txtbox3) + CCur(txtbox4))
End Sub
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address <> Range("B3").address
End Sub
I would like to change the target to ceratin cells in my active row. How would I write the code to achieve this.
Trying to enter dates across first column with userform. Must not enter same date twice. Need to searching row to skip entering the date from userform textbox if date is already there. Dates are in order but not sequential. I want to search for existing date before the following
Set LastCol = Sheet2. Range("jk1").End(xlToLeft) 'enter data on sheet2
LastCol.Offset(0, 1).Value = TextBox2.Value 'date
Rows("1:1").Select
ActiveWorkbook.Worksheets("Sheet2").sort.SortFields.Clear
ActiveWorkbook.Worksheets("Sheet2").sort.SortFields.Add Key:=Range("b1"), _
SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
With ActiveWorkbook.Worksheets("Sheet2").sort
.SetRange Range("b1:jk10000")
. Header = xlNo
.MatchCase = False
.Orientation = xlLeftToRight
.SortMethod = xlPinYin
.Apply
End With
I have the following code that enters data from a user form, the problem is that the textbox (Locker) data will not validate when entered into worksheet.
Private Sub cmdEdit_Click()
Dim rownum As Integer
rownum = 2
'Prompt user with message box asking for input in both text boxes
If Me.txtNumber = vbNullString Then
response = MsgBox("Please enter a Work Number", vbInformation)
Me.txtNumber.SetFocus
Else
' Insert the work no., driver, locker, keys issued & keys On hand
ActiveCell = Me.txtNumber.Value
ActiveCell. Offset(0, 1) = Me.txtLocker.Value
ActiveCell.Offset(0, 2) = Me.txtIssued.Value
ActiveCell.Offset(0, 3) = Me.txtOnHand.Value................
Total amount in Column B should same as shown in Column F
=IF(E3<>"",SUM(OFFSET($C3,ISTEXT(E3),,,1):C3),"")Above formula is calculating always two rows.
I have problem with vlookup. I am attaching my file.
View 3 Replies View RelatedI am including an attached file for reference.
The file is sorted A-Z, but if you scroll down towards the bottom, you will see that some values are out of order. Both instances of University of Central Florida and University of North Dakota are out of place.
University of Central Florida should be between University of California and University of Colorado.
University of North Dakota should be between University of Colorado and University of Southern Mississippi.
I have a really strange problem i have two different hard directories o: & u:
i have the following code linked to a command button
chdir "U: foldername foldername foldername"
saveactiveworkbook.saveas range("c9")
I try the following selection
Columns("B:AF").Select
Selection.ColumnWidth = 2.3
It is selecting columns a to af. Why would take column a if it is not part of select?
Sub Add_worksheet_month()
Dim Lst() As String
Dim I As Integer
Dim wname As Date
'Dim wmonth As Date
I am trying to work out an excel workbook for calculating family recipes. I have gotten most of it figured out but am having a problem with one thing. When the serving size of an item is 8 oz & the recipe calls for 14.5 oz the only way I can get it to work properly is to enter 1.75 in the serving size.
But I would like (actually need) to be able to enter the 14.5 and have it calculate the calories correctly - since sometimes the amount to be added to the recipe may be 15 ounces and the serving size is 8 ounces etc....
I have a rank formula that is seemingly erroring out on certain cells - indiscriminately. I have tried and tried to figure this out for myself but this is beyond my knowledge.
Only on some cells is the rank not working and returning a "-" (the error result).
I want the rank to use absolute numbers, so that it will rank according to variance or percentage (regardless of +/-). I am also using another cell (R1) to tell the rank what column to use.
As you can see there are a few entries, both + & -, that are not being included in the rank - for reasons beyond me.
I have 6 categories that need to be ranked 1-6 in order of highest number of occurances. My ranking formula is showing 1-7, missing number 3. I have attached a sample worksheet further showing what I am trying to explain. I need cell A3 to show a ranking of "3". Currently it shows "4". What am I doing wrong??
View 4 Replies View RelatedI have a form with 2 buttons and a frame. Inside the frame I have another button. I get a Type Error Message when I run the code and I don't understand why.
View 3 Replies View RelatedI have the following two codes on a userform, The first code performs two steps:
The first step is running the second code (MyDate), which is used for checking the entries in the userform textboxes and if there is any wrong entry a message box appears then it exits sub.
However, what happens when it finds any wrong entry is that it displays the msgbox and instead of exiting sub as it is requested in the (MyDate) code, it resumes running and moves to the second step and adds 1 to ComboBox1 ListIndex.
I am in the process of converting my programs over so as not to use these and I am already seeing a drastic difference in speed.
I have run into a problem that I need help with. I have a spreadsheet similar to the example below. The first column contains a list of college majors and after each major is a row of classes that are required by that major.
A25346 ENG101 MAT115 PSY150
A35678 ENG111 MAT115 SOC101
A23456 ENG101 MAT116 HIS201
The first thing I need to do is search down the first column for the major. Once the major is found I need to search across the row for the class. I am having trouble searching across a single row for the class.
Here is the section of code where I experience the problem
Set rMajor = wsMajor.Cells.Find(What:=Major, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False)
If Not rMajor Is Nothing Then
majorrow = rMajor.Cells.Offset(0, 1).Value............
Using frequency in a data validation formula for ensuring unique entries.
Currently I use COUNTIF($B$2:$B$244,B2)
I often have problems with the cells range reference method. For some reason I get an error and can't tell why. Other times it works fine. Is this just an unstable method to use or is this completely wrong? I'm assuming I am using the wrong syntax. It is definetly the range reference causing the problem.
Dim cnt1 as integer, cnt2 as integer,cnt3 as integer
cnt1 = 2
cnt2 = 50
cnt3 = 2
dim myrange as range
set myrange = sheets("sheet1").range(cells(2,cnt1), cells(cnt2,cnt3))
I have no idea why it won't work. I'm basically searching a columner range of cells.
The code below is supposed to insert a column and rename it. However, when I debug, the code only renames the column, it does split or run the loop. I press debug again, and then code executes as it is intended.
I can't explain why I have to press debug twice for in order for the code to work properly.
Code:
Sub renameColumns()
With Sheets("byPosition")
Columns("E:E").Select
Selection.Insert Shift:=xlToRight
.Range("E1").Value = "Exemption"
.Cells.EntireColumn.AutoFit
[Code] .......
I've been working on a particular spreadsheet and I've just noticed that
double clicking the format painter will only format one cell. It won't
retain the format to be put into the next selected cell which it should when
its double clicked. The same goes for copy and paste. Normally once you've
copied something you can paste it into a number of cells individually, one
after the other, but after the first paste selection, the paste option is no
longer available. I can't see any settings under options to fix this. What has happened, and how do I fix it? (I'm using Excel 2003 SP1 - is there a SP2?)
I thought I had been able to use array to have more than two criterias with Autofilter, but now I am unable to make the following code work. What I am trying to do is have all the records that does not contain either N/A, S/O or xx and also have a filter on column 125 for the value "OUI".
VB:
Sub test()
Set ws1 = ThisWorkbook.Sheets("SOMMAIRE_EN_ALL")
Set ws2 = Workbooks("Fichier_central_2013_anglais_2_CLEAN").Sheets("DETAIL_CONCAT")
Set r = ws2.Range("A1:du4783")
[Code] .....
In the attached sheet, one macro is developed which is not working properly. My req is to convert date from dd-mon-yyyy to yyyy/mm/dd format. (23-jan-2010--> 2010/01/23)
If incomplete date is there, then hyphen should place the gap i.e.
For date like APR-2014------> Output should be 2014/04/--
For date like 1998 -----> Output should be 1998/--/--
The below macro works only for row number 11, 15 and 16.
[Code]....
Attached File : date.xlsm
I have entered a custom sort order under 'first key sort order,' but the field is not sorting according to the list.
I'm sure I entered the list correctly, because I actually entered it a long time ago, and it was working for a while. However, today the underlying data was temporarily erased, and the pivot table, when refreshed, basically went blank. I restored the data and refreshed the table, but this field is back to sorting in the wrong order. Refreshing the pivot table and re-choosing the appropriate sort options do not work.
Had been using this formula for almost 3 years, recently the formula didn't work properly as the range goes down halfway only instead of to the last data in the column. I'm using Excel 2010 now.
=Sheet1!$A$2:INDEX(Sheet1!$A:$A,COUNTA(Sheet1!$A:$A))
I have attached my file.
When the Go button in text box in the 'VSVA-1 Data' tab is pressed, a new tab is created. I would like the tab to be renamed after the text that is entered into the text box. Is this possible? Here is what I have so far.
VB:
Sub RenameTab()
'Renames the worksheet tab
ActiveWorkbook.Sheets("VSVA-1 Data").Select
tabName = TextBox1
ActiveWorkbook.Sheets("VSVA Data").Select
Selection.Name = tabName
End Sub
I am trying to set up a data validation to ensure that when a user enters a number in column A that matches a previously entered number in column A, the user is only allowed to enter the same date for the number it matches in column B.
For example, if:
Row 3 column A = 1320
and
Row 3 column B = 16-Dec-07
and
Row 15 column A = 1320
then:
Row 15 column B must be 16-Dec-07
I worked out the code below. I supposed to check the date entered in the text box, if that date is greater than the date in cell A2, is supposed to pop up a message box, but is only half working.
For example if I enter 3/1/2013, the code works, but if I enter 1/1/2014 it will not work, it thinks the date is OK and goes on to to the Else statement. In other words, is only looking at the first part (month and day) of my date and ignoring the fact that the year is in the future.
VB:
Dim frmDate As String
Dim toDate As String
Set ws = Sheets("Dashboard")
frmDate = frmEnterDate.txtReportEffectiveDate.Value
toDate = frmEnterDate.txtReportEffectiveLastDay.Value
[Code].....
I have textbox within a userform and want it to function as the place where the user could enter a password. I just want that during the entering the entered signs would automatically be turned into stars (disguised as stars), but of course the entered password would remain its real value.
View 4 Replies View RelatedI have a userform for entering a sales invoice onto a spreadsheet, it obviously has a textbox each for the net value(textboxnet), gst tax(textboxgst) and total value(textboxtotal). How do I get the total amount textbox (textboxtotal) to automatically sum up as I enter the net (textboxnet) and gst (textboxgst) amounts?
View 4 Replies View RelatedI have a form that will allow the user to type in a date. I need to take that value and validate that it is between 01/01/2007 and 10 years ahead of the current day.
View 4 Replies View Related