Had been using this formula for almost 3 years, recently the formula didn't work properly as the range goes down halfway only instead of to the last data in the column. I'm using Excel 2010 now.
=Sheet1!$A$2:INDEX(Sheet1!$A:$A,COUNTA(Sheet1!$A:$A))
I often have problems with the cells range reference method. For some reason I get an error and can't tell why. Other times it works fine. Is this just an unstable method to use or is this completely wrong? I'm assuming I am using the wrong syntax. It is definetly the range reference causing the problem.
Dim cnt1 as integer, cnt2 as integer,cnt3 as integer
cnt1 = 2
cnt2 = 50
cnt3 = 2
dim myrange as range
set myrange = sheets("sheet1").range(cells(2,cnt1), cells(cnt2,cnt3))
I have no idea why it won't work. I'm basically searching a columner range of cells.
I am trying to insert a Pivot table with dynamic Name Ranges. It needs to start from Cell B1 as Column A has hidden formulas in them. I created an Dynamic Name range and tried to insert a pivot table. Excel then throws out a error stating "Data source reference is not valid". I tried re-saving the document but still no luck.
View 1 Replies View Relatedhow to use the offset function to create a dynamic range in Excel 2010. An in-house Excel form I work with spans columns A thru P and has three sections. In Section 2 the user fills in employees who are requesting to work overtime. Section 2 starts row 12 and ends row 61. It's sometimes necessary to add rows to this section. How do I make this section/range dynamic using the offset function?
View 1 Replies View RelatedFirst I made some contents and drew a border from Home > Font > all Borders on an Excel 2010 file. So it became like below image (capture1). After that I wanted to print it so went to File > Print to see its preview. But the problem is that the lines between tue and wed and also between mon and tue are not shown neither in preview nor when printing. The height of row 7 until 17 is 24 (that is 32 pixel) but heights of the rest of the rows are normal (20 pixel).
View 7 Replies View RelatedI'm working in Excel 2010. I'm trying to create a dynamic range, using the OFFSET function. I've got it working beautifully but as soon as I save it and close the Name Manager the range stops working. When I go back into Name Manager I find all the cell references have changed (from C1:C600 to C1048572:C595 - or some other strange range).
P.S. What it's doing isn't so important as when the cell references are right it works. But just for full info: It's an OFFSET function, starting at A1. It will look at a list of companies and use a Match function to find out how many rows to offset (based on where the first instance of a particular company. And it uses the COUNTIF to make the range the same number of rows as there are entries for that company.
Here is my broken function:
=OFFSET('Map Point'!A1048572,MATCH("Company Name",'Sheet Name'!C1048572:C595)-COUNTIF('Sheet Name'!C1048572:C595,"Company Name"),0,COUNTIF('Sheet Name'!C1048572:C595,"Company Name"))
In the example I have attached there are two sheets, Details and DataTables. There are also a number of named ranges, both static and dynamic, that refer to data on the DataTables sheet. Most of the static ranges were added for debugging purposes. The tables have been shortened for this example.
On the Details sheet column A has a drop down that allows you to select the make of a device. Column B builds its drop down list based on what is selected in column A. The data validation in B2 uses a named dynamic range and the drop down does not work. The data validation in C2 used a named static range and the drop down works.
Column C will fill in the RU value based on what is selected in column B. Cell C3 uses named dynamic range and it does not work. Cell C4 uses named static range and it works.
I would like to used named dynamic ranges if possible so when data is added to the tables the named dynamic ranges will self adjust. Can what I want to do be done?
Dynamic Range.xlsx
Total amount in Column B should same as shown in Column F
=IF(E3<>"",SUM(OFFSET($C3,ISTEXT(E3),,,1):C3),"")Above formula is calculating always two rows.
I have problem with vlookup. I am attaching my file.
View 3 Replies View RelatedI am including an attached file for reference.
The file is sorted A-Z, but if you scroll down towards the bottom, you will see that some values are out of order. Both instances of University of Central Florida and University of North Dakota are out of place.
University of Central Florida should be between University of California and University of Colorado.
University of North Dakota should be between University of Colorado and University of Southern Mississippi.
I have a really strange problem i have two different hard directories o: & u:
i have the following code linked to a command button
chdir "U: foldername foldername foldername"
saveactiveworkbook.saveas range("c9")
I try the following selection
Columns("B:AF").Select
Selection.ColumnWidth = 2.3
It is selecting columns a to af. Why would take column a if it is not part of select?
Sub Add_worksheet_month()
Dim Lst() As String
Dim I As Integer
Dim wname As Date
'Dim wmonth As Date
The formula is =SUMPRODUCT((Group="A")*(Project_Description="Long Term")*(Profile="B")*(INDIRECT(B9)="x"))
B9 through M9 have header text Jan_2012, Feb_2012...Dec_2012. Basically my aim is to get the above formula working before I drag it across so that the named ranges get picked up automatically from the headers.
Jan_2012 thru Dec_2012 are dynamic named ranges using INDEX (and not OFFSET as someone mentioned OFFSET is a volatile function).
The above SUMPRODUCT formula is giving me a #REF! error for the (INDIRECT(B9)="x") part. I know that because when I replace it with (Jan_2012="x") it works fine.
I realized while writing this that it may be because the named range in Jan_2012 is not the same size as that of other arrays. [but it is the same size - I've re-confirmed just now]
I am trying to work out an excel workbook for calculating family recipes. I have gotten most of it figured out but am having a problem with one thing. When the serving size of an item is 8 oz & the recipe calls for 14.5 oz the only way I can get it to work properly is to enter 1.75 in the serving size.
But I would like (actually need) to be able to enter the 14.5 and have it calculate the calories correctly - since sometimes the amount to be added to the recipe may be 15 ounces and the serving size is 8 ounces etc....
I have a rank formula that is seemingly erroring out on certain cells - indiscriminately. I have tried and tried to figure this out for myself but this is beyond my knowledge.
Only on some cells is the rank not working and returning a "-" (the error result).
I want the rank to use absolute numbers, so that it will rank according to variance or percentage (regardless of +/-). I am also using another cell (R1) to tell the rank what column to use.
As you can see there are a few entries, both + & -, that are not being included in the rank - for reasons beyond me.
I have 6 categories that need to be ranked 1-6 in order of highest number of occurances. My ranking formula is showing 1-7, missing number 3. I have attached a sample worksheet further showing what I am trying to explain. I need cell A3 to show a ranking of "3". Currently it shows "4". What am I doing wrong??
View 4 Replies View RelatedI have a form with 2 buttons and a frame. Inside the frame I have another button. I get a Type Error Message when I run the code and I don't understand why.
View 3 Replies View RelatedI have the following two codes on a userform, The first code performs two steps:
The first step is running the second code (MyDate), which is used for checking the entries in the userform textboxes and if there is any wrong entry a message box appears then it exits sub.
However, what happens when it finds any wrong entry is that it displays the msgbox and instead of exiting sub as it is requested in the (MyDate) code, it resumes running and moves to the second step and adds 1 to ComboBox1 ListIndex.
I am in the process of converting my programs over so as not to use these and I am already seeing a drastic difference in speed.
I have run into a problem that I need help with. I have a spreadsheet similar to the example below. The first column contains a list of college majors and after each major is a row of classes that are required by that major.
A25346 ENG101 MAT115 PSY150
A35678 ENG111 MAT115 SOC101
A23456 ENG101 MAT116 HIS201
The first thing I need to do is search down the first column for the major. Once the major is found I need to search across the row for the class. I am having trouble searching across a single row for the class.
Here is the section of code where I experience the problem
Set rMajor = wsMajor.Cells.Find(What:=Major, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False)
If Not rMajor Is Nothing Then
majorrow = rMajor.Cells.Offset(0, 1).Value............
The code below is supposed to insert a column and rename it. However, when I debug, the code only renames the column, it does split or run the loop. I press debug again, and then code executes as it is intended.
I can't explain why I have to press debug twice for in order for the code to work properly.
Code:
Sub renameColumns()
With Sheets("byPosition")
Columns("E:E").Select
Selection.Insert Shift:=xlToRight
.Range("E1").Value = "Exemption"
.Cells.EntireColumn.AutoFit
[Code] .......
I've been working on a particular spreadsheet and I've just noticed that
double clicking the format painter will only format one cell. It won't
retain the format to be put into the next selected cell which it should when
its double clicked. The same goes for copy and paste. Normally once you've
copied something you can paste it into a number of cells individually, one
after the other, but after the first paste selection, the paste option is no
longer available. I can't see any settings under options to fix this. What has happened, and how do I fix it? (I'm using Excel 2003 SP1 - is there a SP2?)
I thought I had been able to use array to have more than two criterias with Autofilter, but now I am unable to make the following code work. What I am trying to do is have all the records that does not contain either N/A, S/O or xx and also have a filter on column 125 for the value "OUI".
VB:
Sub test()
Set ws1 = ThisWorkbook.Sheets("SOMMAIRE_EN_ALL")
Set ws2 = Workbooks("Fichier_central_2013_anglais_2_CLEAN").Sheets("DETAIL_CONCAT")
Set r = ws2.Range("A1:du4783")
[Code] .....
In the attached sheet, one macro is developed which is not working properly. My req is to convert date from dd-mon-yyyy to yyyy/mm/dd format. (23-jan-2010--> 2010/01/23)
If incomplete date is there, then hyphen should place the gap i.e.
For date like APR-2014------> Output should be 2014/04/--
For date like 1998 -----> Output should be 1998/--/--
The below macro works only for row number 11, 15 and 16.
[Code]....
Attached File : date.xlsm
I'm using the following code to try to ensure a value is entered into a text box, but when I click over to the next text box skipping the first one entirely, I don't receive any message indicating the previous box is empty. I'm trying to make it so certain fields are required and others are optional. Here's the code I'm currently using:
[Code] .....
I have entered a custom sort order under 'first key sort order,' but the field is not sorting according to the list.
I'm sure I entered the list correctly, because I actually entered it a long time ago, and it was working for a while. However, today the underlying data was temporarily erased, and the pivot table, when refreshed, basically went blank. I restored the data and refreshed the table, but this field is back to sorting in the wrong order. Refreshing the pivot table and re-choosing the appropriate sort options do not work.
I am using Excel 2010. The template only has 5 working days in it, but I need to set 6 working days (Saturday is also working day). Wondering, how to get this working without spoiling the functions. Also the date format is in US , need to change to UK without disrupting the Formula/Functions.
View 12 Replies View RelatedIn Excel 2010, I can manually enter the GetPivotData function (and it works), but with Generate GetPivotData selected / enabled (in PivotTable Tools --> Options --> PivotTable --> Options), the GetPivotData function isn't automatically generated.
View 1 Replies View RelatedI am using Excel 2010 on Windows 7.
I copied (with 'Paste Link') rows from a master Excel file to a file that performs calculations. This file (and many others like it) need to be modifed by other people. My tester has informed me that the data is not updating between the files for her, although it does work for me.
When I check 'Data->Edit Links' it shows the status of the file as 'unknown'. If I click 'Check status' it is then OK, but the next time I look at it, it has reverted to 'unknown'.
1. How do I get the status to remain at OK?
2. Why do the links work for me, but not for my end users?
I have a macro to collate data from multiple workbooks to a single sheet. The folder path to the source files can be chosen thorugh the macro. It runs perfectly in my system running on Windows XP. But it doesnt run on Wondows 7 system. Both are using MS Excel 2010. In Windows 7 system, while choosing the folder path where source files are located, it says "No items match your search" (screenshot attached). I would want the macro modified so that it runs on any platform. The macros that I'm using is given below:
[Code] .....
Untitled.png
I have a filter on the Qty column but when I sort Z -A or A - Z it does not work. I have tried formatting as number but no success, I have never seen this before, why the sort wont work? I am using Excel 2010 in Win 7
View 5 Replies View Related
