Cells Are Displaying ##########
Jul 19, 2005
I have a bunch of cells that are only displaying ########## (they contain strings of text, and the actual text can be seen in the formula bar).
I know for a fact that the cells do not exceed the character limit for a cell and other cells in the same column are being displayed just fine. I've also tried adjusting the row height and column width but it doesn't seem to be working.
View 9 Replies
ADVERTISEMENT
Jul 27, 2014
I'm putting the finishing touches to a grade sheet for the new academic year. I have one column that calculates a grade using the OFFSET function from a given number of points. However, I only want this cell to show a grade when the nine individual unit columns have been populated. If fewer than 9 columns have been populated, the cell in question needs to be blank. I've tried using COUNTA to count the number of populated cells and then linking that cell to an =IF(Q5=9... formula, but haven't been able to crack it yet. I'm probably missing something obvious...
View 8 Replies
View Related
Sep 20, 2012
I have column h with address number.
I have column k with street name.
In column iv i have an x an number or it is empty.
What I want to do is press a button and it starts at iv10 read that cell if empty then read iv11 etc.
When it reads x in the cell then read next witch will be a number.
Example:
iv10
iv11
iv12
iv20 x
iv21 21
So I would get columns a - ae and rows 10 - 21 displayed and wait till i press button again then when i press button it starts
Example
iv22
iv23
iv89 x
iv90 68
then it would display a-ae 22 - 90
View 1 Replies
View Related
May 12, 2006
I have a variable COMTXT that loads (via loop) several short lines of text to form a "mouthful" of comments together. But have 2 issues with it.
1- I need to add a carriage return after loading each short line of text. [code] Module1.COMTXT = Module1.COMTXT + Sheets(3). Cells(Module1.COMCODE, 1)
[?CODE]I have try'd [& vbCrLf &] in many syntax's to no avail.
2- When displaying COMTXT to a sheet, its too big for the cell ! and not able to enlarge the cell without major disortion to rest of sheet. How do I acheive this and allow the text to display like a textbox or label, covering many cells and rows.
View 4 Replies
View Related
Nov 15, 2009
At my work we use excel to keep a large number of labels done in one day, those labels are then added up to give our weeks total, running total and average by day.
What i am looking to do though on a seperate sheet though is find out which day we had the most, an example of what it looks like
View 2 Replies
View Related
Oct 14, 2009
The formula contained within these cells equals =MONTH(C84) [the date 2 cells above it]... to which I've formatted the cell to "mmmm" and it displays "January" across the board. Can anyone explain why this is occuring and how I can fix it please? I'm aiming to graph this information and can't accurately do it using the moving monthly system i've put in place if I can't change the months dynamically like this.
Secondly, and on a side note. Line 84 currently takes todays date (not currently todays date in the example screenshot) (=TODAY()), and to get to the previous 13 months I deduct 31 days. I can foresee this as being a problem further down the track especially when leap years come into play. Is there a function in Excel where I can simply deduct 1 month from another? =MONTH(C84)-1 ?
View 2 Replies
View Related
Oct 23, 2008
The basic spreadsheet consists of a list of names down the left hand side with 19 columns across - one for each art activity (I have pasted a copy of it below - but it doesn't paste so good!). Each person has selected their three activities and this has been recorded by placing a 1, 2 or 3 in the relative columns. Each person has been told that they will get a place on two out of three of their chosen activities (in which case we will change one of their choices to a 0).
What I would now like to be able to do is to create a mail merge in Word which looks at each person and then goes along that row to find out which columns have a 1, 2, or 3 in it. The heading for that column would then be used as a merge field so that I end up with a word document which looks something like this:
{Woodwork Stars} and {Cooking Sweets}
NameClassGlass
Painting
Candle
Centre Piece
Large
Nativity Figures
Beaded
Decorations
Advent
Calendars
CrackerPaint
Bowl/Plate
Xmas
chimes
Woodwork
Stars
Cross
Stitch
Sewing
Decorations
Recycled
Wreaths
Pompom
Robins
Clay
Xmas Tiles
Decoupage
Bowl
Cooking
Cake
Cooking
Sweets
Salt
Dough
Wrapping
Paper/Cards
Smith, Fred213John, Elton213Turner, Tina123
View 9 Replies
View Related
Jun 25, 2014
I am trying to create a summary Calendar that would display all the names of the people who are off on a given day. I have a grid where I display each day of the month and a person in the group has their own column. If they are out of the office for any reason their name appears in that row. In the big Summary Calendar cell for each day of the month I want to look across all the people columns for that day and then display the names of the people who are not going to be in the office. Can I do this by a formula or will using VBA work best.
View 6 Replies
View Related
Dec 31, 2013
I have an excel sheet which looks similar to below and with some more columns.
HTML Code:
AreaBranchEmpolyeesProductsShelfs
Area1Area1 Branch110Product 110
Area1Area1 Branch25Product 16
Area1Area1 Branch38Product 28
[Code] ......
I want to have data in other sheet With respect to Product details. Where It gives me the count of Product 1 and so on.
I am able to get the count using countif function and it displays like below.
HTML Code:
Product Count
Product 16
Product 28
Product 34
Product 49
Product 510
Product 68
Product 78
Product 89
Product 97
Product 108
What I want is when I select "Product 1" It should display some selected columns data from sheet where complete data is available.
HTML Code:
Branch Empolyees Other
Area1 Branch1 10 abc
Area1 Branch2 5 xyz
Area1 Branch5 7 pqr
Area2 Branch5 5 wxy
Which function we can use. I tried Vlookup but was not successfull.
View 14 Replies
View Related
Mar 27, 2014
I wanted to count the number of instances that Matt's been late. If there are consecutive timestamps (ex. 600-620, 620-640) that he's been late, I wanted Excel to display 1 and then I'll just sum it up. Or if Excel can do this directly, add all the instances because what I actually need is the total per person.
In this example, I would need a result of 4 instances.
tell if the blank cells will affect the formula or if I still need to do something about them.
View 3 Replies
View Related
Aug 15, 2012
I have attached a work book example of what i am trying to do.
Column D is what i originally did in terms of the formula and now i have to have a column display text dependant on what is in column A to C.
I was trying this formula =IF(b2>a2,"Start Target Missed",IF(c2="","Failed","Tracking")) However if this isnt working.
Is there anything i can do to change this?
View 3 Replies
View Related
Jun 25, 2012
Column A & B has a list of Supplier Part numbers and Buyer Part numbers as below.
Supplier P/N
Buyer P/N
HGFYE/12
111111
HYEYDH/14
222222
[Code] ..........
Cell D2 is an open cell that any data can be entered into as a search term. What I am trying to do is search for a Supplier P/N that have the characters "H", "G" or "E" in it, so entering "HGE" into cell D2 would display the results into columns F & G as below.
Supplier P/N
Buyer P/N
HGFYE/12
111111
HDGTEY/56
333333
I can easily do a formula for 1 character or a string of characters.
To complicate it further, if the search term has in this example has "YFF", I would like the same formula/code to workout that the result in F & G should show this time
Supplier P/N
Buyer P/N
YHDHFF/58
555555
I am using Windows 7 and Excel 2007.
View 2 Replies
View Related
Apr 21, 2007
Is It Possible to use VBA Coding to Display An Image (Object),
And Un-Display or Remove that Same Image (Object) using a VBA Code?
Example:
I have a Mailbox Picture that I would Like to Show, but only when a cell's
value = 5. If the Cell's Value is not 5, then don't display the mailbox.
View 12 Replies
View Related
Jun 24, 2009
I am trying to create a drop down list that when selected will display data in the 10 rows below and 4 columns, so a total of 40 cells. I would like the data to be based on the selection in the drop down list.
The data looks like this,
RequirementsQtyResourcesQty
Level 1 Sentinel10Level 1 Sentinel105
Level 2 Sentinel10Level 2 Sentinel167
Level 3 Sentinel10Level 3 Sentinel156
Level 1 Banga20Level 1 Banga401
Level 2 Banga20Level 2 Banga307
Level 4 Banga20Level 4 Banga0
i have 27 different combinations of the above list with up to 10 different rows. I have a label for each one, but i cannot get the rows below my drop down list to display the proper values base don the selection in the drop down list.
View 8 Replies
View Related
Nov 24, 2009
I have tried different formula involving with decimal places.
If A1 has a whole number like 5141234 then the result would come out as a whole number =(A1-5148000)*1.000440935+48000
If A1 has three decimal places like 5142356.654 then the result would out as three decimal places
View 4 Replies
View Related
Feb 13, 2014
I was looking to have a Word for example 'Apple' but want it as a number e.g '10'. I want to use it so that I can add up the prices of items by just clicking on the name of the item. So If I want to add up 3 items e.g. an apple , a banana and a pear which all cost £10 each I want to be able to click all three items and get the total of £30 displayed in a certain box.
View 1 Replies
View Related
Oct 11, 2008
I'm working with a worksheet with one sheet per day of the month (we use a master, copy/paste, change the copy to the current month, and go from there). I've already got it to figure the dates based off (really difficult).
View 3 Replies
View Related
Dec 19, 2009
I have an XML file which I can open in Excel as an XML table. When I try to insert a chart from any of the data, a chart appears but the data appears as the legend but not as any lines on the chart. The column headings, which would normally appear as the legend, do not appear. The chart itself is blank. Does anyone have any ideas of a way to solve this?
View 10 Replies
View Related
Feb 18, 2010
Refer to the attached worksheet. On entering a value into cell C7, I'd like the value of the adjacent column D7 to be displayed in F6. Then when a value is entered in manually into C8, it will then update and put the value of D8 into F6. The idea is an individual will enter a value each week, updating that value. I intend to hide column D.
View 2 Replies
View Related
May 22, 2013
I cant see my A B C D bar in a spreadsheet page. I can see it in the same book different sheet though.
Excel options/advanced/display options for worksheet/ show row and column is ticked
And also tried simply Unhide on the vertical column 1 2 3 4
View 2 Replies
View Related
May 2, 2014
I have an excel sheet which contains details of quantities supplied of a particular party by an agent! It ranges from a period of April to March In Some places the agent has supplied a party's material only from april to december and jan,feb , march is supplied by a different agent for the same party.
I want to create a report which is as follows: When i choose an agents name, It should show me all the parties to which he has supplied the material and all the months from april to march. If he has not supplied in a particular month then show zero. Same should be for all the agents.
I need to create this report and i was trying with pivot tables but that didnt work!
I guess it can be done using vba code!
I have attached a sample file : Data Filtering VBA.xlsx
View 5 Replies
View Related
Jul 6, 2007
I'm looking for a better/faster way to display the entirety of an array (dimensions like 10 by 10, mixes of strings and integers), besides assigning all of the values to cells in a worksheet. A pop-up window or form would be stellar, but I don't know how to work with forms so well.
View 14 Replies
View Related
Jan 12, 2009
Is there anyway I would be able to display the current age of majority (19 here at home) in a cell or userform? This would have to be current each day the form or sheet was opened.
View 5 Replies
View Related
Mar 27, 2006
1. What is the maximum characters an Excel cell can take?
I try to import a very large text string into an Excel cell. I notice that
it's truncated to a certain maximum length.
When I set the cell type to be TEXT it displays #########################
But when I set cell type to GENERAL then it displays ok.
I just did a Len() on my text cell and it appears the maximum characters
allowed is 330. Is it possible to extend this?
View 9 Replies
View Related
May 31, 2012
I have two columns in my spreadsheet, and both are dates. Using a calculation (one date minus the other) I get the duration (in days) between the two.
I also apply color coding to say if the duration is > X, then color code as red, etc.
All the color coding is working fine for values that are either > or < 0, but anything where the two dates are the same (date 1 - date 2 = 0), the value shows as blank.
When I click on the cell, the value "0" is actually IN the cell, but it's now showing, as if the font was colored white or something, but it hasn't.
I don't have anything in the code telling the worksheet not to display "0" values, so I don't know where to go...
View 5 Replies
View Related
Jul 19, 2006
I want to have a function that finds the largest number in a selection range. However, i want it to display what's in the cell beside it! Example:
Say the largest value is in B6 well I was wondering how you would go about displaying the value in C6.
View 5 Replies
View Related
Jan 25, 2014
I have a spreadsheet and am in the middle of creating a userform to display the results of data over a given period (period selected by user).
In that userform I would like to display a graph (the graph will be created behind the scene once the date range has been selected). Is there any way that the graph can be displayed on the userform? If so, how?
View 1 Replies
View Related
May 26, 2014
check the table in the attachment.
I only want the top row / filters (A1 - H1) to be displayed on Table 1 but keep the functionality of it.
Is it somehow possible to hide all the information below A1-H1 or put it on another table and let Table 1 refer to it?
The table is mostly in German but it shouldn't matter.
View 2 Replies
View Related
Jul 7, 2014
So i'm receiving a web query on a sheet that is taken from a table off the web. When this data gets extracted into the sheet, it populates as "$xxxM" in order to show that it is a certain million dollars. The problem is, I need to total all these numbers to display at the bottom of my report. So essentially, I am trying to configure web query to display as "number" as opposed to "$numberM" so it is easier to total.
View 1 Replies
View Related
Apr 8, 2009
I'm trying to display a value both numerical and also in english (e.g display both 200 and two hundred, 259 and two hundred and fifty-nine and so on.)
View 3 Replies
View Related