I have a workbook in Excel 2007 with several sheets imported from other workbooks. In the course of this, one of them has brought several custom cell styles with it and I would like to be rid of them, as they clutter up the cell styles gallery.
Most of them were cooperative and deleted simply enough by right-clicking and selecting 'Delete', but one is proving a little more stubborn.
When I mouse over it, it plays the 'alert' noise (the 'bink' you get when Excel wants to alert you to something) and then nothing happens. There is no noticeable change to text or cell, as there should be thanks to 2007's previewing ability. Trying to apply the style results in the message
"Style '
386grabber=VGA.3GR
' not found."
(the line breaks are present in the message and seem to be because the style name actually has character returns as the first and last characters).
Is there a way to delete this style, or am I going to have to resign myself to having an annoying noise every time I try to apply styles
I have a macro that changes the marker style for all series in a scatter chart, chosen through an input box.
[Code].....
It works nicely, but I want it to exclude any series that do not have markers (i.e. lines used to indicate a reference value). I've tried an if-then statement after the With statement, but it will add markers to any line series:
[Code] ......
Basically, if the series has markers or line+markers, I want it to change the marker style, otherwise do nothing with the series.
I have some cell styles that refuse to be deleted in Excel 2010. I can see them on the ribbon, but right clicking and deleting doesn't do anything. Any way I can get rid of them? Just makes things look very messy. If I click them it says "Style 'XXX' not found."
I have a list of Cell Styles under the Styles tab in Excel 2007. I want to delete all the Cell Styles since its slowing down opening and operating of the Excel file. I do not want to individually delete them by right click-delete. Cmarco to run for performing this action?
***I DO NOT WANT TO REMOVE CELL STYLES FROM A RANGE- I WANT DELETE THE CELL STYLES FORM THE STYLES TAB IN THE HOME RIBBON IN EXCEL 2007****
I saw there were codes to sum or count cells that have a specified Fill Color http://www.ozgrid.com/VBA/sum-count-cells-by-color.htm
However it says the changing of a cells fill color will not cause the Custom Function to recalculate, I really need to recalculate the data if there are any changes in the selected range
I know OpenOffice can do it but I can't seem to figure out if Excel can or not. I have various styles defined to include the font, color, pattern, etc. which are setup the way that I want. I also have Options>View - Zero Values.", "style="background: #FFFFFF;padding: 2px;font-size: 10px;width: 550px;"");' onmouseout='GAL_hidepopup();'>formatting.htm" target="_blank">conditional formatting formulas set where I want. All appears to be working well. What I want is that the result of the conditional format uses the style reference rather than the absolute reference by changing the format in the conditional dialogue box. Can Excel handle that? If so, how?
I was creating command buttons and had trouble using the linked cell. I found an example on the forum here but the command buttons seem to have many different behaviors. On the attachment, "Button 1" and "Button 2" are the ones I created in Excel 2003. "Button A" and "Button B" are from an example I found on the forum.
1 and 2 can only be edited on design mode, and have the formula "=EMBED("Forms.OptionButton.1","")" by default (which yields an error when exiting the formula field). A and B can be edited at any time, and have an extra tab ("Control") on the Control Format dialog. This seems to allow the linked cell to be set and function pretty handily. Are A and B from a different version of Excel? Auto Merged Post;Here's the attachment:
Is it possible to do a custom sort on a column so that I can change the order the way the months are sorted. The order I'm looking for is:
October November December January February March April May June July August September
Also the format for the cells in that column is 01-Jan, I don't want to see the year because I enter and sort the date as if the year doesn't matter so it automatically registers as 2014, if that makes sense. Basically I want that order of the months regardless of the year.
The code below works fine, I can copy selected area into new sheet. However, I wish to custom change the Range("A1:AO164") value, for example, at cells(1,1) I key in A1, then cells(1.2) I key in A56, then this changes will reflect to the value in this macro to Range("A1:A56"). I tried using this way :
Dim A as string cells(1,1).text = a cells(1,2).text = b Range("a:b").Select
I am using the following code to create an Excel toolbar custom control Button. What would be the VBA code to change the color of the image I have chosen? ....
I have selected a range of multiple rows and columns. I can change the alignment, cell color, where border lines appear, and the color of border lines.
However, I can not change the border line style. No matter what style I select, when drawn on the sheet it apppear as a thin solid line. I've tried all the dashed/dotted line options, but they appear to have no effect.
Ultimately, I want to color alternating rows of cells, and (since coloring hides grid lines) I want to add border lines the same color and style as the hidden grid lines.
The attached file contains data. In Worksheet 1 (and also 2 and 3) column B2 shows day, month, year, hours, minutes and seconds. I was hoping to convert this to just Hours and Minutes, but all the usual methods using Custom Format does not work. This leads me to think that its in TEXT format. How can I change Column B2 to Hours and Minutes?
I'm trying to make a converter between about 8 various types of values. These are not units like Km or miles or something like that, but rather numbers that represent a specific "hardness value" on a variety of scales (to name a few: HRC, HRA, K)
What I've been doing so far is plotting the two types against eachother and then getting the best trendline I can so that I can use that formula to convert between the two with relative certainty. (for example, when plotting HV vs HRC my fourth order polynomial trendline with an Rsquared of 1 is y=0.0001x4 - 0.0188x3 + 1.0768x2 - 20.709x + 350.69)
My questions comes up where I was hoping to make a window or box of some sort allowing the user to input a numeric value, then selecting the Input units and the hopeful output calculated units, and have the box spit back to the user the conversion.
I want to be able to create a range of VBA userforms to quickly perform long tedious tasks. I want these userforms to be accessed from a nice tidy toolbar.
I have done this and it looks nice and works well. What I would like to be able to do is have my custom toolbar of userform controlled functions be transferable so that if someone else wants my toolbar and attached functions they can install it easily much the same way you can do with an add in.
Is this sort of thing possible or does it require them to manually install all my userforms, modules and toolbar? If it is possible what sort of things should I be looking at?
Can this be done automatically in a worksheet using the custom cell format function??.... because then it wud get formatted as necessary whenever someone enters a vehicle no. in that particular column.
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code: Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim MyText As String MyText = Environ("username") If Target.Cells.Column = 3 Then With Target If .Value "" Then .Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
is it possible to custom format a cell in order to:
a) Present 3.33333 as 3.33 (max. of 2 decimal digits or less) b) Present 3.333 as 3.33 c) Present 3.33 as 3.33 d) Present 3.3 as 3.3 e) Present 3 as 3 (NO zeros and NO decimal dot)
I want to create a custom format for a cell for entering in "cup measurements". I want to be able to type in 5, 1/4, 1/16, etc. and have the word "cups" appear after the number in that cell. I formatted the cell to say the word cups after typing in the numbers in my cell using the code "cups".
ex: 0 "cups" works fine for whole number
so then if i change it to 0/0 "cups" is works great for only 1/8 but not 1/16 or whole numbers. Then I looked at other custom codes that already existed in my formatts so I attempted to try this code which I just kinda came up with
_(0/00);_(0);_(0/0); "cups"
well it isn't doing what I want and If I use the 0/00 "cups code and I type in 4 cups the cell then says 4/01 cups.
What does my code need to be for me to show whole numbers and and size fraction without having it look weird?
Basically i want to use a UDF to count cells in a range of a certain colour.
But i want to make it easy for the user to be able to change the colour the function counts, so i thought i could ask them to colour the cell in which the function is written.
Is there a way to tell the function to pick up the Interior.ColorIndex of the cell it is written in?
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName() On Error GoTo errhandler Sheets(1).Name = Sheets(1).range("d10") Exit Sub errhandler: MsgBox "sheet name is already exists" End Sub
