I have some cell styles that refuse to be deleted in Excel 2010. I can see them on the ribbon, but right clicking and deleting doesn't do anything. Any way I can get rid of them? Just makes things look very messy. If I click them it says "Style 'XXX' not found."
View 3 RepliesI have a list of Cell Styles under the Styles tab in Excel 2007. I want to delete all the Cell Styles since its slowing down opening and operating of the Excel file. I do not want to individually delete them by right click-delete. Cmarco to run for performing this action?
***I DO NOT WANT TO REMOVE CELL STYLES FROM A RANGE- I WANT DELETE THE CELL STYLES FORM THE STYLES TAB IN THE HOME RIBBON IN EXCEL 2007****
I'm trying to delete a range of rows based on the value of a given cell. For example, if cell AC1 shows 5000, then I'd like to delete (not just clear) the range A5000:AA1048576. Or, if cell AC1 shows 10000, then I'd like to delete range A10000:AA1048576. I've come up with what is below but I don't think this is the right way to do it. I am using Excel 2010.
Code:
Range("AC1").Select
ActiveCell.FormulaR1C1 = "=COUNT(C[-27])+2"
Calculate
Range("AC1").Select
Selection.Copy
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = False
Range("A" & Range("AC1").Value:"AA1048576").Select
Selection.Delete
I am conducting a stock count.
Column A consists of a list of the barcodes I've scanned.
In column A there is sometimes more than one of the same barcode when i have more than one of the same product. is there a way of deleting duplicate barcodes in column a and replace them with a 'Quantity' column?
I have a problem where Excel 2010 is deleting one of my conditional formatting conditions. I do not know if it is deleting it on open or close. I just know that I enter the conditional formatting, save the workbook, close the workbook, reopen the workbook, and it is gone.
The other conditional formatting conditions (simple "Cell is Blank") are left intact.
Setup:
Cell with conditional formatting is on sheet "MyRecord" at "$E$7". A corresponding boolean value on separate sheet "Data" and must be referred to by using "OFFSET" with a record locator value (workbook level named range "RecordLocator") that leads to corresponding data row, so looks like following:
Code:
=IF(OFFSET(Data!$D$5,RecordLocator,0),TRUE,FALSE)
When I configure this, it works great until I save and close the workbook. When I reopen the workbook, this particular conditional formatting is gone with all other conditional formatting left intact.
I've tried using the actual range address in place of range name "RecordLocator", changes nothing.
I can't figure out why Excel deletes this particular conditional format.
Is there a way of preventing Exel from Applying table styles, when converting a range to a table. and leave the formatting of the table intact?
View 1 Replies View Related(Excel 2003, using Format/Cells)
I have selected a range of multiple rows and columns. I can change the alignment, cell color, where border lines appear, and the color of border lines.
However, I can not change the border line style. No matter what style I select, when drawn on the sheet it apppear as a thin solid line. I've tried all the dashed/dotted line options, but they appear to have no effect.
Ultimately, I want to color alternating rows of cells, and (since coloring hides grid lines) I want to add border lines the same color and style as the hidden grid lines.
I have a macro that changes the marker style for all series in a scatter chart, chosen through an input box.
[Code].....
It works nicely, but I want it to exclude any series that do not have markers (i.e. lines used to indicate a reference value). I've tried an if-then statement after the With statement, but it will add markers to any line series:
[Code] ......
Basically, if the series has markers or line+markers, I want it to change the marker style, otherwise do nothing with the series.
I have a workbook in Excel 2007 with several sheets imported from other workbooks. In the course of this, one of them has brought several custom cell styles with it and I would like to be rid of them, as they clutter up the cell styles gallery.
Most of them were cooperative and deleted simply enough by right-clicking and selecting 'Delete', but one is proving a little more stubborn.
When I mouse over it, it plays the 'alert' noise (the 'bink' you get when Excel wants to alert you to something) and then nothing happens. There is no noticeable change to text or cell, as there should be thanks to 2007's previewing ability. Trying to apply the style results in the message
"Style '
386grabber=VGA.3GR
' not found."
(the line breaks are present in the message and seem to be because the style name actually has character returns as the first and last characters).
Is there a way to delete this style, or am I going to have to resign myself to having an annoying noise every time I try to apply styles
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedI have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
I have a company with upto 5 products, and I have created a dropdown box where you select your product.
When I select product 1 i would need info on product 1 , when i select product 2 I need info on product 1 and 2 and continue. so for product 5 -i need info on product 1-5.
I tried to add all info on excel and tried to delete it one by one by deleting rows in excel for products but it does not work.
When I use the mouse pointer to select a cell I can't use the arrow keys to move to another cell while the pointer is over the cell and I can't edit the cell while the pointer is over the cell. If I move the pointer away from the cell then I can move around and edit as normal therefore I don't think this is a scroll lock issue.
This issue also happens when I select a tab. If I select a tab and then leave the pointer over the tab I selected then I can't use the arrow keys to move around the worksheet or edit a cell; if I move the pointer away from the cell then I can move around and edit as normal.
I am using MS Excel 2010.
I have an Excel 2010 spreadsheet consisting of many worksheets (20 or so). Each of these worksheets contain detail level data regarding different projects. One of the columns in these worksheets is the 'Status' column (column F). There is conditional formatting on this column where if the text is 'G' then change background to a green color, 'Y'=yellow, 'R'=Red and 'U'=Grey.
The first worksheet is a summary sheet that I would like to pull information from each of the detail worksheet's columns B, D, E, G and H if the status column (Column F) is 'R' or 'Y'.
The number of rows in the detail worksheet can change each week (as few as 0 and as many as 100)
I have a range of cells each containing a name. Based on a number that has to be entered manually I want excel to return the names concatenated in one cell. So for example:
Number of variable entered: 5
q9001
q9002
q9003
q9004
q9005
q9006
etc.
Should give me: "q9001 q9002 q9003 q9004 q9005"
I have been trying to work with formulas using IF and CONCAT functions. But so far I haven't figured out how to have excel return me the correct amount of variables for each separate number that can be entered seeing the number of variables entered can vary from 1 up to 50.
(Using Excel 2010)
Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.
Excel 2010
A
B
C
1
Helper Column
Desired Result
[Code].....
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Ive also attached the worksheet
we have a Excel 2010 worksheet containing multiple tables.
Table1
ColumnA ColumnB
1 Blue 12
2 Orange 14
15
11
3 Red 10
Table2
ColumnA ColumnB
1 Blue 11
2 Black 13
15
11
3 White 10
19
17
On a separate worksheet we want to calculate with the first worksheet's values.
For example: Calc1: Sum ColumnB IN Table1 WHERE ColumnA = Orange
How do we do such a calculation/formula?
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
I am using Excel 2010.
In my worksheet I have 'Column A' and 'Column B', In 'Column A' are product I.D. numbers. In 'Column B' is a text description of the product, whose I.D. number is in 'Column A,' and should also contain the I.D. number from 'Column A' somewhere in the midst of the descriptive text. However, some of these in 'Column B' do not.
I need to create a function that looks for the value in 'Column A' and determines whether or not it is present in the text of 'Column B'. Therefore, spitting the answer out in 'Column C' so that I can copy it down for 100,000 cells.
(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
I would like to accomplish 2 things in my Excel 2010 spreadsheet by click a cell which already has a number and formatting in it.
1. How do I change the color of the cell, the color of the number in it, and the border around it. (Make it look like I just pressed a button by clicking it.)
2. At the same time have the text in different cell and the number in the selected cell appear in another different cell. (Text in a different cell = A , and the number in the selected cell = 23, the value in the resulting cell be "A 23") Everything I would like to happen at the same time by clicking the selected cell. I would also like this to be done several times by clicking different cells and not changing the previously selected cells.
I need to display a set of cells based on the value of two drop down cells i have. As I am not very good at english and worse at explinations, I'll try via screen shots...
I have two dropdowns (C4 and C6) that will indicate what table to use (Second sheet / screenshot). I want that "table" to display in the yellow box on the first page. To complicate matters, some options do not have a CLA option - those starting with X. As there are 24 different outcomes and each is 3x9 if/then statements just dont seem to cut it.
P.S. I have excel 2010 and windows 7
I am trying to get a phone number column to change between two custom styles. I have added the styles in as:
Mobile: 0000 000 000
Extenstion: x00000
I need column E5 down to change between the two if < 6 or >5 numbers are used in a cell to change to the correct style.
Does this can be done just using the styles or vba coding is required.
I already have some vba to add the date into column B if column A is altered.
I know OpenOffice can do it but I can't seem to figure out if Excel can or not. I have various styles defined to include the font, color, pattern, etc. which are setup the way that I want. I also have Options>View - Zero Values.", "style="background: #FFFFFF;padding: 2px;font-size: 10px;width: 550px;"");' onmouseout='GAL_hidepopup();'>formatting.htm" target="_blank">conditional formatting formulas set where I want. All appears to be working well. What I want is that the result of the conditional format uses the style reference rather than the absolute reference by changing the format in the conditional dialogue box. Can Excel handle that? If so, how?
View 3 Replies View RelatedI was creating command buttons and had trouble using the linked cell. I found an example on the forum here but the command buttons seem to have many different behaviors. On the attachment, "Button 1" and "Button 2" are the ones I created in Excel 2003. "Button A" and "Button B" are from an example I found on the forum.
1 and 2 can only be edited on design mode, and have the formula "=EMBED("Forms.OptionButton.1","")" by default (which yields an error when exiting the formula field). A and B can be edited at any time, and have an extra tab ("Control") on the Control Format dialog. This seems to allow the linked cell to be set and function pretty handily. Are A and B from a different version of Excel? Auto Merged Post;Here's the attachment:
Excel 2010. I need to place picture into one cell or one big merged cell, as a background fill. picture must resize to size of cell. must be fixed in, not in front. i still need write into that cell, so it needs to be really background.
View 2 Replies View RelatedWhat I'm trying to do is, create a formula that works like vlookup, except I want to return the value of the cell that is a specified number of cells below the looked-up data in a single column array. So, let's say cell A1 reads "Bacon". In B1, I'd like to put a formula which searches the array for the cell that contains "Bacon" and then returns the value of the cell underneath, let's say the value is "Eggs". Then in C1, I'd like to put another formula which also looks up "Bacon" in the array, then returns the value of the cell that is down two cells from the cell that contains "Bacon", let's say the value is "Milk". And then in D1, a formula that returns the value 3 cells below "Bacon", and so on. All the values here will be text, and not sorted in any specific order. I'll be using Excel 2010.
Please take a look at the attached sheet if it clarifies things.
Is there a way in Excel (2010) to lock data from being entered into cells based on the value in another cell? Here is an example:
Row 4 contains dates from 2015-2030 as a header starting at column C (C4 and on) that represents years of revenue. Column B contains dates as well, this date can be any year but this becomes the driver for the data input in columns C through X. Column B contains the "Delivery Date"
Data is input in Columns C and so forth. The issue becomes that let's say that the date in C4 is 2016 and this is the beginning year. Obviously there should be no inputs for 2015 (C5) and the data should start to be input for this year at 2016 (C6). Often people just begin filling in the first available year not looking at what the year actually is.
Is there a way to add a formula or some logic/protection to prevent inputs in previous rows based on the values in column B? So if the value in column B is XXXX than there can be no inputs in cells less than that value?
I'm using Excel 2010 and I would like to format a cell (say, the font of that cell turns RED) if the value of another cell meets a certain criteria.
View 9 Replies View Related