Change Automatically Without Double-clicking?
Apr 14, 2014
A
B
C
D
E
F
G
I have a spreadsheet with formulas in column C, D, E, F and G. The only numbers I need to enter are in columns A and B. The formula in column C comes from the =SUM(B1/A1) Column D is calculated based on the result of column C, etc...
How can I set up the spreadsheet so that when I enter the data in column A and B, everything else calculates automatically; without having to double click and press enter in each cell?
My Goal: To put data (numbers) in Column A and B and than have C, D, E, F and G calculate by themselves without clicking.
All of my cells contain numbers, not text
View 6 Replies
ADVERTISEMENT
Jul 26, 2008
how to get a userform by double clicking a cell.
I have created a userform, (my first one)-very simple form, i have created a massive textbox, so when i doubleclick a cell in Sheet 1, userform pops up and I can write comments.
I am not sure how to write a code for this? I know it will have Private Sub Doubleclick, not sure on the rest?
View 9 Replies
View Related
Feb 1, 2009
I want to hide and unhide column AI by double clicking on a certain cell, let's say S25. Can this be done?
View 8 Replies
View Related
Mar 20, 2009
I have two pieces of code. The first one puts a tick mark in the cell when you double click it. The second one hides column B of another sheet if the value in cell A1 of Sheet1 is "a". I want to combine these two codes so that when I double click cell A1 of sheet1 it puts a tick mark in the cell and hides column B of Sheet2 and clears the contents of range B2:B50 of Sheet2.
View 4 Replies
View Related
Mar 31, 2014
My cells have wrap around text enables. However when I double-click the row, it does not automatically adjust the row height to accommodate all of the text. It shrinks to a small row height. How do I fix this?
View 1 Replies
View Related
May 31, 2011
I upgraded to Excel 2010 from Excel 2000 a couple months ago. In Excel 2010, after double-clicking on values in a pivot table to create a new worksheets, I'm unable to highlight those worksheets and add a column to all of them. I was able to do this in Excel 2000... I can't figure out what's stopping it from happening for the life of me. Am I missing something obvious here?
View 3 Replies
View Related
Sep 20, 2007
i use excel 2007, it s slow to open a file by double-clicking and entering from windows explorer, by googling i fould a fix by adding "%1" at the end of command in "Application used to perform action" (folder options/file types/xls/advance/open). however, to open files in the same instance, i have to keep "DDE message" with [open("%1")]. With both "%1", excel now opens twice.
How to fix it?
View 3 Replies
View Related
Jul 19, 2009
I have a list of links in 1 excel worksheet. They are spaced every other row if it makes a difference. I need to create a macro that clicks on every link automatically. Each link is a direct file that I need downloaded every few months. I have no Macro experience beyond hitting record to automate basic tasks.
View 13 Replies
View Related
Aug 25, 2009
I'm trying to do. I have 2 columns, both have empty cells with borders. I would like to make it so that when the user clicks one of the cells, it turns grey and the one beside it turns white. I set up two macros as follows:
View 3 Replies
View Related
Jul 29, 2006
I am trying to do is use VBA to move from the diagram directly to the macro number. The Cells on the Diagram have functions in them and there is no reference to what macro goes with which function. My list loocs like this
Macro NumbersFunctionCommands
1001 Lamp On
1002 Lamp Off
1003 (Empty)
1004 (Empty)
1005 (Empty)
1006 CH 611 611
1007 Ch 612 612
1008 Ch 613 613
1009 Ch 614 614
1010 Ch 615 615
1011 Ch 616 616
1012 Ch 617 617
1013 Ch 618 618
The diagram is a 20 by 20 grid of cells that correspond to macros I have a third sheet that has the macro numbers listed in the same format as the diagram. The problem I have is how to read the corresponding macro number from Sheet 3 then find that number on Sheet 2.
View 9 Replies
View Related
Feb 24, 2012
(Using Excel 2007)
What would be the quickest and most efficient way of doing the following:
Example
Sheet 1: clicking once, twice, three times in the following cells to change the fill to Red, Yellow, Green respectively (in Row 22, COLUMNS E H K N Q T W Z AD AG) and mirrorring this format/fill on:
Sheet 2: , mirror the selected fill on sheet1 in E22, H22 , K22 in in E3:N3 respectively example E22 (sheet1) is mirrored now in E3 (sheet 2); H22 (sheet 1) is mirrored in F3 (sheet2) etc etc.
I have 35 tabs formatted in the same way - each tab, as with Sheet 1 is linked to a different row on sheet 2 in the same range as is sheet 1 and would need to replicate the mirorring on Sheet 1 to each of the other 34 tabs.
View 9 Replies
View Related
Jul 19, 2009
Split from Copy Rows, Meeting Criteria, From Multiple Worksheets & Append To Summary Sheet
This has been wrecking my head for a week. For the debtors tab it is all of the rows which have the value "Unpaid" for each of the 12 months that need to be copied into the tab. For the invoice I thought there could be a button at the end of each row and when you clicked it, it put the info into the invoice template and then the person could just print it off and resend it. And then do the same for the rest of the invoices.
View 4 Replies
View Related
Jul 11, 2014
I want to change value if i change products from drop down list.....
For more information please find attached file: Book.xlsx‎
View 8 Replies
View Related
Aug 13, 2012
I'm coding a userform where there are some comboxes which are popolated by values coming from Sheet2. Up to now I work it out (maybe its not elegant but it works).
Now I would like that when the user selects one combobox the values of the other comboboxes are set accordingly to the grid in Sheet2.
Please download the XLS file at: [URL]....
View 2 Replies
View Related
May 9, 2006
=CHOOSE(WEEKDAY("1 Jan " &$C$1),"Sun","Mon","Tue","Wed","Thu","Fri","Sat")
where C1 = the year 2006. B1 has the month Jan and I want to input that into my formula, so when I change the month, it automatically will change my formula. I tried =CHOOSE(WEEKDAY("1 $B$1 " &$C$1),"Sun","Mon","Tue","Wed","Thu","Fri","Sat")
B1 = Jan
C1 = 2006
View 7 Replies
View Related
Aug 21, 2007
I have a spreadsheet i would like to have changes tracked to automatically. I know it's only a matter of clicking a few buttons to get this to happen, but i was wondering if there is a way to have excel do this by default when i open the file. I would also like to have the changes highlighted automatically.
View 9 Replies
View Related
Feb 23, 2007
Is there a way that I can add a statement or change my code to automatically have the checkbox checked if a certain value in a cell is greater than zero?
This is my
If CheckBox1.Value = True Then Range("RANGE_WATER_AND_SEWER").PrintOut Copies:=1
If CheckBox2.Value = True Then Range("RANGE_ELECTRICAL_SERVICE").PrintOut Copies:=1
etc. Note: I have about 80 checkboxes on my form.
View 9 Replies
View Related
Oct 2, 2008
I want the value in cell D12 to change automatically when I put in certain values. If I type in "Weather" I want the cell to change to say "WOW". If I type in "Bell Run" I want it to change to say "BR".
View 9 Replies
View Related
May 25, 2014
I want the 2 graphs in "Graph" worksheet to change automatically when a row is inserted in "Data" worksheet . Every time i have to change the graph manually to contain the latest 20 days value. I want some offset or something which can be put in the range provided below to do the work.
Chart Data Range =Data!$A$1:$A$22,Data!$F$1:$F$2,Data!$L$1:$L$20
Legend entries (Series) - Series Name =Data!$F$1 ( this will remain constant everyday as this is a header field)
Series Values =Data!$F$2:$F$22 ( this should contain last 20 days range, for example if a next row is inserted tomorrow then it should automatically change to =Data!$F$3:$F$23)
Legend entries (Series) - Series Name =Data!$L$1 ( this will remain constant everyday as this is a header field)
Series Values =Data!$L$2:$L$22 ( this should contain last 20 days range, for example if a next row is inserted tomorrow then it should automatically change to =Data!$L$3:$L$23)
Horizontal (Category) axis series -Axis Label Range =Data!$A$2:$A$22 ( this should contain last 20 days range, for example if a next row is inserted tomorrow then it should automatically change to =Data!$A$3:$A$23)
Sheet attached : Devicess.xlsx
View 6 Replies
View Related
Dec 21, 2012
Basically, at month end, my company will create a new folder with the name as YYYY_MM (e.g. 2012_11). In this folder, a new file will be created as: earnings_YYYY_MM (e.g. earnings_2012_11).
What I want is to automatically update the link to the most recent file: earnings_YYYY_MM, whenever it is available. For example, next month there will be a new file earnings_2012_12 created in the new folder 2012_12, then the new file will be linked with.
View 1 Replies
View Related
Aug 15, 2014
I'm attempting to get a column of due dates to update automatically every time a date changes. The due dates are in B3:B15. There is a header in B3. The day after the actual due date, it is automatically changed to the same day on the next month (showing the next due date). I need the spread sheet to automatically sort the due dates from the closest due at the top, to the furthest due date from today at the bottom. Running it manually, or sorting it manually every time won't work. This is for an elderly couple who are having problems keeping track of everything each month. I just need something that will show them the upcoming bills and how soon they are due when they open the workbook. Anything other than opening the workbook is going to be too complicated. I'm new to macros. I've tried to modify some I've found in other threads, but no luck (lots of error messages). I don't understand it enough yet to figure out what I need to change. I've attached a sample sheet that shows the part of the workbook I'm having trouble with.
View 4 Replies
View Related
Feb 26, 2013
I have a speadsheet with a column of student names with corresponding columns of classes and class times. The class times are on a rotating schedule and will be35 minutes later every week. Groups A to D have rotating lessons at 8.55, 9.30,10.05, 10.40 and groups E and F have rotating lessons at 11.45 and 12.20. I need to print slips with student names and class times each week. I want to be able to update the lesson time for the next week automatically. The only way I have thought to create a custom sort list with lesson times and I drag and fill series for new lesson times. However, the list doesn't return to the beginning of the series, it creates a new lesson time. My question is, is there a better way to update the lesson times?
View 1 Replies
View Related
Jun 9, 2008
Is there a way that under "Type the Cell Reference" that you can make it automatically change to the cell the hyperlink is on?
The reason why i ask this is because I have hyperlinks linking to there current cell but once i delete a row above that... the cell refernece doesnt change therefore changing the cell reference to the cell above it
View 9 Replies
View Related
Feb 22, 2009
Is it possible to have a macro run when a date is changed each month instead of clicking on the button. I have a few macros that are ran each month in a spreadsheet (manually) but would I would like to have them run automatically when the date is changed in cell a4 each month. The date in cell a4 is always the last day of the month. Also the name of the workbook changes each month
View 9 Replies
View Related
Jul 17, 2009
I'm working on an excel sheet to display technical problems in an office. I want to use a filter in order to not display problems that were resolved (by applying a filter to show only "0" on the "problem duration" column that displays "hours problem was up after solved" and "0" if not solved) as the point is to display only non-resolved issues.
I wanted this filter to be re-applied constantly, meaning once I fill the time and date it's solved and the formula calculates the time it was up, this row will automatically vanish due to the filter applied.
I found this thread on your site Refresh Autofilter Automatically from the resolved problems so we need to remove the filters once in awhile. With this after the filter is removed, you cannot setup a new filter at all (it just doesn't seem to allow you, erasing it after it is being applied). I need to not only be able to setup a new filter, but also that this new filter will be reapplied automatically all the time (temporary disable of a filter is also an option, but I do not know whether it's possible).
I do have Excel 2007 on Vista, but I also need this to work on Excel 2003 with XP.
View 9 Replies
View Related
Jul 13, 2006
AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes".
USD 100
EURO 100
Is it possible to automatically make it:
USD $100
EURO €100
View 9 Replies
View Related
Jan 20, 2007
I have 3 charts on 3 seperate worksheets. The data for each is sourced from a list of up to 100 but only the top 20, or all if less than 20 in full list, are displayed on the chart. A seperate worksheet ("Calcs") is used to sort all the data so that just the top 20 are sourced for the charts and they are displayed in descending order from max to min and alphabetically in the case of 2 or more names having the same value.
I have attached one ot the charts.
I need the y axis scale to auto-adjust to suit the max and min series 1 values. I need the y axis maximum to be 5 more than the max series 1 value (unless the value is 5 or less when axis should be 10) and the min y axis to be 3 less than the min series 1 value (unless the value is 3 or less when the axis should be 0)
I have done the formulae to sort out these conditions and put the required y axis values in a cell which the copies across to the chart sheet with the required max in cell M1 and the min in cell L1. These values will change when another macro runs.
I searched this site for the code to auto-adjust the scales and found one which I have tried to edit to suit my needs. This is the code I have ended up with, placed within the worksheet containing the chart....
View 9 Replies
View Related
May 4, 2007
I have a worksheet set up with code to have it Autofilter. My criteria is that if it has 0's in column d then it gets hidden.
This sheet is automatically filled in from information on another sheet.
Is there anyway that when the information is changed that the AutoFilter will automatically refresh itself?
View 4 Replies
View Related
Sep 25, 2007
I have been given a spreadsheet that turns whole rows different colours when certain data is entered into a cell. I want to locate the code and use it elsewhere, but cant find it?
I have looked at all of the change related procedures in the drop downs, for the Workbook e.g.
Workbook_SheetChange
but no matter where I cant seem to find any code at all.
Is there a way of exporting every line of code and then open this file in notepad to skim through it?
how I might find the code that is making the rows turn different colours?
View 3 Replies
View Related
Jan 5, 2008
I have an Excel file that I believe was a template, maybe from MS. It's a loan calculator. Anyway, whenever you change the interest rate or number of payments it somehow knows to only print those rows - even though there are formulas in many of the rows beneath the print range.
View 4 Replies
View Related
