Change Event To Convert Percentages To Whole Numbers
Jan 29, 2013
I have a page for data entry that I want to automatically convert any data that is a percentage to a whole number (50% to 50 - not to 0.50). I am in the Sheet code (not the workbook) and I can't seem to get this to work. Data will likely be pasted by the user in bulk to a range (B3:H32) though data may not cover the entire range. I want the conversion to happen seamlessly to the user as my userbase will exceed 1,000 users, many of whom are not Excel savvy. When I enter data as a percent in the range on the sheet (using B column only at the moment for testing), nothing happens. Right now, the loop only covers the B column, but ideally, it will cover the entire range.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B3:H32")) Is Nothing Then
For Each c In Range("B3:B32")
[Code] ....
View 8 Replies
ADVERTISEMENT
Jun 18, 2014
I have a sheet that shows me in column I, J , K whole numbers eg. 25 , 50 , 25
I would like to format this to percentages eg. 25%, 50%, 25%
The number of rows can grow as well.
View 6 Replies
View Related
Mar 27, 2009
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies
View Related
Nov 23, 2008
I'm trying to get a scroll bar to change a percentage value. My percents are to the hundredth. I understand how to adjust the properties to get it to use whole numbers... but i am trying to adjust my smallchange by .01% and large change by .1%
is this possible? or is there a workaround for it? i've only ever used scroll bars for whole numbers.
View 2 Replies
View Related
Aug 7, 2006
I have the following code, which works perfectly:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim TotalDays As Integer
TotalDays = Range("C65536").End(xlUp).Row + 1
The code points to the next blank cell so the user can input a value. Each time the user enters a value I want to re-run the code so that the colour of the cell changes.
However I also want to perform various calculations on the sheet. However this means the sheet is being changed and so continually repeats my code.
How do I add the following, to my previous code?
Range("E8").Value = Cells(7, 6) * 2.5
View 9 Replies
View Related
Dec 2, 2013
So I have a bar chart with numbers as its data labels...so each bar is divided into 4 colors equaling to 100% ...how can i show percentages next to numbers in the chart...so for example if a bar equals to 200 and each color is lets say 20, 60, 40, 80 ...i would like to show these numbers as well as percentages..i know we can do this manually by inserting a text box but the percentages might change quite often and i dont want to go through the hassle of calculating and changing them each time.
View 1 Replies
View Related
Feb 27, 2014
I have to calculate percentages, lots of them,, have 4 scenarios
1.- positive / positive
2.- positive / negative
3.- negative / positive
4.- negative / negative
I wish to find a formula that covers all scenarios, have thousands of data to calculate
View 2 Replies
View Related
Jul 6, 2006
When I open a new excel workbook and enter a number in any cell it formats it as though I am entering a percentage. So when I enter 100, the cell value becomes 1. How do i change this? I have tried formatting the cells and no change....
View 3 Replies
View Related
Sep 8, 2007
I wish to write an "IF" formular to express a row of numbers in the way I wish to display them in accumulative fashion. 1 upto and including 9 = 1% ...
View 9 Replies
View Related
Nov 22, 2013
Can the data in chart change itself to be percentages & number ie, axis changing the format itself. i am trying to present a dynamic chart and trying to show both sales and % sales in same column chart (based on a drop down option).
View 1 Replies
View Related
Jun 17, 2009
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies
View Related
Jul 21, 2009
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
View 4 Replies
View Related
Dec 6, 2011
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
View 5 Replies
View Related
Jul 21, 2009
Im trying to use an event change to change the sheet name based on a cell value, but my issue is how can I error trap if the sheet name is a duplicate? Here is what I have so far
Sub ChangeName()
On Error GoTo errhandler
Sheets(1).Name = Sheets(1).range("d10")
Exit Sub
errhandler:
MsgBox "sheet name is already exists"
End Sub
View 9 Replies
View Related
Jun 27, 2014
I need a formula to create the following:
In Cell F5 is 26, so the percentage should be 101% (100+1). How can I modify the below to add 1% when the number goes over 100%?
Do I have to create two columns? one for the below and one if the F6 is over 100%?
IF(F6="N/A","N/A",IF(F6>=25,1,IF(F6>=19,0.8,IF(F6>=13,0.6,IF(F6>=7,0.4,IF(F6>=1,0.2,IF(F6
View 5 Replies
View Related
Sep 27, 2007
I have a simple bit of code that fires some code when it detects a change in cell $P$5 but it doesnt work and I cannot understand why - can anyone assist with this one? I am very green but keen:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$p$5" Then
Range("D9:D81"). AutoFilter Field:=1, Criteria1:="<>"
End If
End Sub
View 2 Replies
View Related
Jul 10, 2012
I am trying to find a efficient solution to convert 3 lists (in the same column layouts) to a calender format. I have different lists that are maintained but want to consolidate them into one calender. So rather than looking at 3 individual lists, someone can view this one master calender with all the events/meetings.
The events from each list would automatically populate one master calender.
List 1: Abe
Event Date__Discription
1/20/2012__Lunch meeting
3/2/2012__Convention meeting
5/11/2012__Dinner meeting
List 2: Bill
Event Date__Discription
1/4/2012__Office Meeting
6/2/2012__Golf meeeting
[code]....
Is there an existing program or file out that can accomplish?
View 1 Replies
View Related
Oct 22, 2009
In the ID column of the attached excel file whenever I convert the numbers stored as text to numbers it results in a weird transformation.
e.g. an ID of 480610141001 becomes 4.8061E+11. When I do the same process in the name column, which has similar numbers, it will give the correct result following the same process.
View 2 Replies
View Related
May 23, 2014
I have been looking through the forums and found the below code, but I have both text and numbers in the same range. I have attached an example of what I need to have converted.
Book1.xlsx
View 3 Replies
View Related
Jan 16, 2008
See attached file. A colleague is downloading rows of data from a website which contains a number field Excel is currently treating as Text after being pasted in. My spreadsheet includes just a sample of the many rows of data however as you can see the VALUE function refuses to convert these text values to numbers. How these might be converted and why the VALUE function refuses to work in this case?
View 5 Replies
View Related
Apr 19, 2009
I have a user input box (VBA) with two columns of data entry. The leftmost column has text boxes labeled color1, color2, color3, etc.. The rightmost column has text boxes labeled tag1, tag2, tag3, etc..
I have the TAB sequence set to go from color1 to tag1, color2 to tag2, color3to tag3, etc..
A user can inadvertently tab over the color1 (or color2, etc. columns) into the tag1 (or tag 2, etc. columns) column without entering data in the color column.
Is there coding to allow a TAB key entry to be a Change Event such that, if a user TABS out of color1 without entering data, a MsgBox could signal that they must enter data in the color1 field before they can continue?
Alternately, can you suggest a different approach? The goal is to require an entry in the leftmost column (color1) before they can proceed to the tag1 field. Of course, they are given a "Cancel" option.
View 7 Replies
View Related
Feb 7, 2014
I am trying to run the below code whenever the result of cells (22,x) changes. Cells (22,x) contains a formula.
[Code] .....
View 2 Replies
View Related
Feb 26, 2014
I have a chart with 2 Y axis. I am attempting to write some code that will update both axis with the same max & min value that is triggered by the combobox selection. The code will update the axis but is not triggered by the combobox selection.
[Code] ...........
View 6 Replies
View Related
Apr 30, 2009
Cells in Column M have a data validation drop-down list. If the user selects 'Closed', I want this code to run:
View 12 Replies
View Related
Aug 15, 2009
I want to know if it is possible to have 2 workshhet change events for one sheet. Let me explain this. Presently I have one workshhet where if any value ie entered in column A automatically date and time is entered in column B. I can do this by using folloing code.
View 5 Replies
View Related
Sep 29, 2009
I've been searching all over and can not figure this out as from my limited knowledge it should work. I have two sheets (A & B) and on Sheet A an employee inputs a job number into column B and what I then want to happen is have column D populate automatically with the clients address. This client address is located in Sheet B. I figured the best way to do this was to use a combination of the 'Change Event' method and VLookup utilising a bit of VBA, but I just cant get it to work - I keep getting a #Name? error.
View 5 Replies
View Related
Jun 7, 2007
In a Worksheet On Change event I am trying to obtain a new value that the user has placed into a particular cell.
However, when I get to the line of code that reads the value in that particular cell, it is pulling the value that was in the cell prior to the change. When I view the sheet I can see the new value. When I do a debug.print or ? in the Immediate Window it shows the prior value.
View 9 Replies
View Related
Apr 17, 2009
Dim bfr As Long
bfr = ComboBox1.Value
ComboBox1.Value = bfr: Exit Sub
how come this gives me a "cant change property" error!?
The code is inside my combobox change event...
View 9 Replies
View Related
May 28, 2009
trying to get a worksheet change event to work. Basically the code below calls the time_start procedure when cell J16 downwards is selected.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 15 And Target.Column = 10 Then
Call time_start
Else
End If
End Sub
However, I am lost from here on....Let me try and explain what it is I am trying to do. This seems so simple if you know how. Each time that the word "Completed" is entered in to a cell from J16 onwards, the cell two columns to the right on the same row is selected and the current date is entered.
If the word "Completed" is deleted, I want the date on that row to be deleted.
I would also like the choices "Completed" and a blank cell to be given in a validation list via a dropdown if possible to avoid occurances of "Complete" etc and mis-spellings but I understand that a bug may stop me from using this functionality. I am running Excel 2002 on a Windows XP Professional OS.
View 9 Replies
View Related
Dec 9, 2009
I was wondering what I can add so this will not error when I delete the contents of the target range,
Private Sub Worksheet_Change(ByVal Target As Excel.Range) If Not Intersect(Target, Range("C11:C29, E11:E29")) Is Nothing Then
If Target.Cells.CountLarge > 2 Then Exit Sub
Application.EnableEvents = False
Target.Value = UCase(Target)
end sub
View 9 Replies
View Related
