Calculate A Specific Sheet When Something Change In The Workbook
May 25, 2006
I have build an add-in To Calculate Specific Sheet when something change in the workbook. For this I am unselecting the "automatic calculation" option and check "Manual". Now with every change in a cell i would to call AUTO_CALCULATION_PI that is calculating only the sheet that the user have been selected.
The problem when i change a cell Workbook_SheetChange is not stiggered and nothign happen. I dont understand why? The add-in is doing the following. Create a Menu "PI Options", this open a user form where you can select the worksheet to calculate, the choices is store in hidden worksheet called "AUTO-CALCULATION-PI". When a cell is change the Macro AUTO_CALCULATION is called, and calculated the sheets that the user have selected.
I have a code and I want to run this macro whan a specific cell change (which has sum formula) and this code also has some calculation. And I m not understanding to overcome this problem through Calculate event.
I have data in 2 different workbooks, and I need to transfer all data in 'Jx_ex1' to sheet1 in the 'template' workbook, and all data in 'Gr_ex1' to sheet2 in 'template' workbook. All data should be transferred to the same cell numbers, from A1 to Y5000. I actually have loads of workbooks to transfer to the template but if I have an example with the two then im sure I can work out how to modify it. All files will be in the same folder.
All detail data begins in Row 6 in the detail spreadsheet.
In the Summary spreadsheet, it appears to make a difference where my calcs are located in order for my COUNTIF's to work correctly. As long as I keep my summary calc (to total the number of work orders in the detail) in Row 2 of the Summary, it works fine...but if EITHER I move my calc down a row OR if my detail drops down a row because a row was added above (where I have just header info), my summary totals change?!?! I don't understand.
Here are two examples of the calcs I'm using in the summary:
=COUNTIF(WO_Num,">0") =COUNTIF(GM_X,"X")
Can someone tell me what is going on? What I'm doing wrong?
Essentially I need to copy the first 8 cells in a row in one sheet (for example: A3:I3) when the word "Actuals" is entered into A3 from a drop down list. Then the copied data needs to be pasted to a another existing worksheet in the same workbook in the next available row. The data includes mostly values, but there is a formula in column H that creates a hyperlink out of the content in column G, friendly name in column I.
I am not stuck on the idea of having "Actuals" entered in column A as the trigger or change event and there will be times when a new copy/paste of the same data will need to be done more than once at a later date.
For further information, column B contains a serial number/productID number.
is there any way to open a workbook and select a sheet within the book without having the entire name? I've got a unique workbook and worksheet identifier but don't know how to use wildcards to get my macro to open the right workbook.
I have two workbook having 8 worksheet each. Every day I need to copy data from previous day worksheet and paste it on new workbook with same sheet name.
For example :- Workbook1 is having sheet named aa, gg, tk ..... Workbook2 is having sheet named as same as Workbook 1
Now, I want macro to copy data from Workbook1, sheetname 'aa' and paste the same in workbook2 in sheet name 'aa' and likewise
I have a workbook, 'MyWb.xls' and a sheet with buttons to which I attach some sheet macros. When I assign a macro to a button I pick the appropriate reference, e.g. Sheet2.MyMacro, and this gets recorded by default as MyWb.xls!Sheet2.MyMacro
When I create a new single sheet workbook with the instruction ActiveSheet.Copy, I end up with a new workbook, say 'Book2' along with the buttons as expected. However the macros attached to the buttons still refer to the MyWB.xls file and not the new 'Book2.xls'. As part of the process of creating the new book I've tried redefining the macro with the instruction
I have data that is on a separate .txt file (the source file) that resembles this;
A B C D E F
1 Case District Pct Division Level1 Level2
2 305035 0 20 72
[Code] ..........
Using VBA from within the destination workbook, I would like to use an input box that allows the user to request/specify what numerical number (0 through 55) in Column B of the txt file (the source file) will be used to determine what data to copy to the destination file. The cells to copy to the destination file would be from Column A through Column G of the source file onto Sheet1, E2 of the destination file.
Column B of the Source file will only contain numbers. However there will be numerous identical numbers in Column B. All of which will need to be copied onto the destination workbook.
From the sample above, if the user were to enter '15' in the input box, the desired result on the destination sheet beginning at E2 would look like this;
I have many worksheets in a workbook that need to be saved if a user changesanything on them. These sheet names all end in "....SD" and the code needs to only run on those sheets. I have learned alot from the forum but not enough, just yet . . This is what I have so far:
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range) Dim sht As Object For Each sht In ThisWorkbook.Sheets If LCase(Right(ws.Name, 2)) = "sd" Then MsgBox(Prompt:="You must save changes. Save now?", Buttons:=vbYesNo) = vbYes Then ThisWorkbook.Save End Sub
It doesn't like the 2 "Then's". (Don't laugh - I'm trying.)
I get this monthly report that has 5 tabs in it. The last tab, ALL_FAILURES_1mon, is a list of part and serial numbers that have failed that month. From that tab I copy the information into a master workbook that houses all the failures broken up by part number, each part number is a separate tab. I am wondering if there is a way to search in the "Monthly_Report" document for all rows containing the part number, 07X-000-ZZZ" and copy the entire row into the master fails list. I have attached a couple examples with sensitive information blocked out.
What I need is for when the macro is run, it will search "Monthly_Report.xlsx" ALL_FAILURES_1mon tab, for "07X-000-ZZZ" and copy all rows containing the part number and paste them in the next blank row of "Master_Fails_List" in appropriate tab.
*NOTE*I have attached both examples however my "Monthly_Report" document was too large so I had to upload it as a .xlsb but the original is .xlsx
I would like to change the greater than number to the value in cell 'I11' in sheet 'Linear Programming Data' and the less than number to the value in cell 'I12' in sheet 'Linear Programming Data'. The code I am using was done by recording a macro since I don't know how to code in vba.
Code: Sub Results2() ' Results2 Macro ' copy table filter power by greater than and less than Sheets("Finalizing Results 2").Select Cells.Select
I have used the below code to insert a new row when the value in coulmn A change. I now need to evolve it so that the new row will contain a specific value depending on the changing value:
Before: Column A Column B one test one test two test two test three test three test
After:
Column A Column B one test one test Coz two............................
I've created a chart in sheet 1 in a workbook. I want to copy and paste that chart into another sheet (lets take sheet 2) of the same workbook. I am using Excel 2010 version.
Whenever, I try to copy a graph and want to do "Paste Special as Link picture". The problem I am facing as "Paste Link" option is inactive.
how to calculate if lets say I have two columns with headings named columna and columnb respectively - I want to calculate columna x columnb irrespective of their location on the sheet and length. They could be anywhere... C1,C2 or even C10!
if there is a way (without using a macro) to calculate just a specific column or selected area in a spreadsheet. It is a colossal spreadsheet and takes a few hours to calculate even just one sheet. I know you can go through it hitting F2 then enter a lot but that is getting tedious!
1. Sheet1.xlsx (regular excel sheet as the extension is .xlsx)
2. Consolidated.xlsm (macro enabled sheet as its extension is .xlsm)
1. Copy both the files on your system under a particular folder.
2. Now make 9 replica's of Sheet1.xlsx and name them as Sheet2, Sheet3, Sheet4, .......... Sheet10
3. Open the sheet Consolidated.xlsm and see the button i have added called "Pull Data".
Now write down the code by adding a Module in that excel sheet from the code window.
4. Write a code that will open each of these sheets (Sheet1, Sheet2, Sheet3, Sheet4, .......... so on) one at a time and will copy the data from these sheets to the Consolidated.xlsm sheet.
5. Make sure that the data is appended(and not overwritten) from the multiple sheets (Sheet1, Sheet2, Sheet3). that is once you paste the data from sheet1 to Consolidated.xlsm then the Sheet2 data will be pasted at the end and after that sheet3 data will be pasted and so on..
6. In this way at the end we will have all the data from Sheet1, Sheet2, Sheet3...in the consolidated sheet.
7. The Division column in the Consolidated sheet will have the value of first row in these multiple sheets. So after making the replicas of Sheet1, please change the value in first row (Range A1) to any other value to avoid the confusion.
8. I have highlighted the data for two sheets in yellow and grey color in the consolidated sheet.
A long time i have not been practising VBA so i am looking for a little refreshment. I am having a workbook with a random number of worksheet with different name that the user can define as he wants. My calculation option is set-up on automatic so each time i make a change all my formulas are updated. However i want the user to be able to disable the calculation of a specific worksheet that he would chose throught a list. Basically the calculation will remain automatic but the selected worksheet will not be updated when a change occur.
We use a spreadsheet to log all transactions at our front desk. I've made a column that automatically calculates the time when a transaction is input into a row. The formula is as follows:
=IF(D5="","",IF(A5="",NOW(),A5))
This morning that formula stopped working on the computer at the front desk, returning a message about a circular reference. I can open that same spreadsheet on my computer as well as others in the office and it calculates fine, but of course on the one computer on which I need it to work, it won't ;P
All computers are using Excel 97. Presumably a setting has changed on the front desk computer that's affecting this calculation.
I am working with multiple workbooks with several tabs in each one. I need the forumula to update the "sheet name" from the source workbook even if the destination workbook is closed.
this is a portion of the forumula I am working with:
I have a workbook that is used to calculate values from various data etc. On completion of calculating the values, eg. £20,000, I want to put the values into specific cells of another workbook template. I can of course do it manually by selecting the cell of the template workbook and do an = then reference the the cell in the calculating workbook.
What I want to happen when all the calculations are complete is that:
1. A new workbook, based on the template, is opened and saved with an appropriate title
2 The values from the calculating workbook are automatically entered into the new (saved) workbook at specific cells
I have a form with grouped check boxes for each day of the week, and start date and end date from the Microsoft Date and Time picker control. I want to know the total days within the date range based on check boxes. For example, Tuesday and Thursday are checked off. The start date is December 1, 2012 and end date is January 31, 2013. What is the total number of Tuesdays and Thursays in that two month date range.
i have a timesheet that we are trying to use. the problem is the column that says shift diff. if an employee works after 6:30pm for 1and 1/2hr, he is entitled to shift hours. shift hours is between 6m and 8am.
As long as he works after 6.30pm but works for at least one and a half hour, he will get the shift.
if work, 9am to 7:30pm, and have break between 2-3pm, should have 1.5hrs shift and 9.5hrs total if work, 7:45pm-9:45pm, and have break between 8:30-9pm, total hrs work is 1.5 and shift hrs s/b 1.5hrs if work 3pm to 12am and have break between 7-8pm, total hrs work is 8 and shift hrs s/b 5hrs
