How Do I Check Cells In Multiple Work Sheets With SUMIF
Jul 19, 2007
How do I get a function to check cells on multiple work sheets.
For example this function searches for the word "hello" in cells, A1 to A50 and then adds up the number in the corresponding cells where "hello" is found from C1 to C50:
=SUMIF($A$1:$A$50,"=hello",$C$1:$C$50)
Two questions:
01) How do I search the same cells in two further work sheet, "Sheet2" & "Sheet3"?
02) Is there a way to search every cell in an entire work sheet?
View 9 Replies
ADVERTISEMENT
Jan 3, 2012
I am trying to use the SUM IF Array formula to sum a group of numbers that fall under a heading of reference numbers over several sheets of data. For example purposes lets say my spreadsheet looks something like the below.
A
B
C
D
E
1
2600000248391
2600000393805
[code]......
The first two digits of the heading numbers are the criteria I am trying to use to separate and sum the data. For example I need to sum the value of the data below headings that falls between 1400000000000 and 1499999999999.
For the example above I used the below formula for the current Sheet and it works fine.
{=SUM(IF(A1:E1>="1400000000000",IF(A1:E1="1400000000000",IF(Sheet1!A1:E1,Sheet2!A1:E1
View 5 Replies
View Related
Jan 20, 2009
I'm trying to put together a spreadsheet that tracks disc capacity increases, affected by any incoming projects. I've managed to do so for one project, but would like to for up to 10. The way i've designed the solution (i'm sure there are far more elegant ways, but hey) is thus:
A forecast worksheet keeps track of a grand total, taking information from sheets P1 -> P10 (being projects 1 to 10). I am unable to figure a way to add up all the increases from all 10 project worksheets with one succinct formula. What I use so far is: ='P1'!C83+SUMIF('P1'!E82,"=2009 - Q1",'P1'!D82) ..................
View 5 Replies
View Related
Jul 17, 2006
How can I get a vertical lookup or sumIF formula to check multiple tabs for a given value?
Or - is there a way to specify the tab? For instance, put "Tab A" or "Tab B" in Cell A1, and have the lookup formula reference the value of Cell A1.
View 6 Replies
View Related
Mar 6, 2007
Ive put some sheet code together that i need copied to 12 sheets (jan to December) in 24 workbooks (each workbook has trhe same sheet names). I dont want to alter the actual content of the Excel sheets, I just need to copy VB code from a template (in VB editor) to the 12 sheets in each of the workbooks. Is this possible to do with VB or do i need some other utility since Im using the VB editor....
View 9 Replies
View Related
Apr 21, 2006
I have the following formula that I am trying to use but the result is #VALUE:
=SUMIF(Sheet1:Sheet9!B1,"PMI",Sheet1:Sheet9!A3)
The formula should look in cell B1 of each sheet and if it is equal to "PMI"
sum of the value in cell A3 in each sheet.
View 14 Replies
View Related
Sep 28, 2012
I have got a workbook with multiple sheets, each sheet is in the same format but with different products across the top. The below formula sums the relevant columns by looking for the column with the relevant product code then sum accordingly. How do I amend the formula so that it does the sum for multiple sheets. I could just copy the formula for each sheet but their must be a better way to do this.
Code:
=SUMIF('FM'!$A:$A,$A2,INDEX('FM'!$A$1:$J$34,0,MATCH(Summary!B$1,'FM'!$1:$1,0)))
View 1 Replies
View Related
Feb 23, 2012
Code:
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Intersect(ActiveCell, Sheet8.Range("C16:Y1000")) Is Nothing Then Exit Sub
Dim rw As Integer
Dim arw As Integer
rw = 16
[Code] .....
As you can see, my code is located in the sheet8 worksheet object. Now, I have a few questions about this. Because I am located in the sheet8 worksheet object does that mean my code can only work in sheet8, i.e., the following won't work because I am in a Sheet8 worksheet object?
Sheet10.Range("B12) = ..... ....... .....
This is not returning a value in Sheet10? My question is how do I make my code return a value in Sheet10?
View 6 Replies
View Related
Apr 23, 2009
I have a folder on a public drive. (\CFDIVIX1PublicPurchasing2009)
This folder contains multiple sub-folders (the sub folders are vendors which I purchase merchandise from) each sub-folder has 1 .xls file in it. Each file has 1 sheet containing all the information I need to retrieve.
Each one of these files has the same header information in cells A1 through I2 so I manually place that when I create this new workbook prior to inserting the macro. Each work sheet has a different # of rows depending on the number of items I buy from that particular vendor but I feel safe saying it never exceeds 250 rows per worksheet.
What I need
For the macro to pull up the first work sheet and pull out the data from cells A3 through I250 and place that data into my new work sheet in the same format. Then I want the code to move on to the next worksheet and pull out the A3 through I250 and place that data in the new worksheet directly below the last row of data that was pulled in. (Also it would be great if the code ignored blank values. Like if the first work sheet it pulled data from only had data in the first 10 rows I don’t want 240 rows of blank rows before the next set of data)
I hope that running this macro will accomplish transferring all of my data from these multiple sheets into a single work sheet containing all of the pricing for all of my vendors. Once I have this I can place a second sheet on the workbook and use a formula to pull out pricing information that I need on a per basis without having to search through 50 vendors to find who it comes from. I don’t control the vendor work sheets that I want to extract data from so I need to use the macro to run it weekly incase my purchasing dept makes changes.
View 9 Replies
View Related
Feb 7, 2012
If I want to check a range of cells how would I modify this to do that?
Single Cell (working):
=IF(AND(Sheet1!T42=Sheet2!J68),"Yes","No")
Range (not working):
=IF(AND(Sheet1!C64:J64=Sheet2!C33:J33),"Yes","No")
View 2 Replies
View Related
Feb 28, 2013
Using VBA, I am running code that filters the data in my column "Account" on my main sheet, creates a new sheet for each account in that column then copies the filtered data to the new sheet. There will always be the same list of Accounts with the exception that there might not be data for one or more.
In that case, I still need it to create a new sheet with the account name but just have some text stating "no data available for his account".
I can find code to search if a specific sheet name exists but, in my case, I don't know which one won't have data at run time.
I was hoping I could put a static list of the expected sheet names into an array and loop through that list and create the sheet for any that it can't find.
My list: FTL, DTB, CAR, BLD, RSG, STS
View 2 Replies
View Related
Aug 14, 2007
I have a sumif formula in one workbook that relates to information off of another workbook...when the other workbook is open the information populates no problem when you close the other workbook I get the #VALUE error. Is this typical of SUMIF when referring to another workbook? I have a vlookup function that refers to the same workbook and it works fine when the other workbook is closed?
View 9 Replies
View Related
Jul 9, 2013
I want to check if cells C1, D1 and E1 contain the same name. For example if the cells all contain the 'Joe Bloggs' (or whatever the name variable happens to be) then cell F1 should say "Yes", else "No".
View 1 Replies
View Related
Aug 21, 2014
I am trying to check if the dates are equal with multiple if statements! Macro works great if first date is wrong, but if the 2nd or third date is not unequal it does not work anymore.
really tried to do it myself but unfortunately
I added an excelexample
Date in E3 is different (if you type in other date in cell b3 macro does work partially).
View 1 Replies
View Related
May 22, 2006
=AND($AE$2:$AE$10<=$F$2:$F$2000;$AE$2:$AE$10>=$E$2:$E$2000) With this I am checking for conditions to be true or false
Lets say I am checking AND(AE2 <= F2 ; AE2>=E2) this tells me if date in cell
AE2 is smaller or equal to Cell F2, but how can I set this fromula to check if all the cells from F2 to F1000 are equal to AE2 so If I write date into Cell AE2 it checks all dates from F2 to F1000 and check if condition is true or false
(and if I write date in cell AE3 it should check all the dates from F2:F1000, if date in AE3 is in this range)
View 9 Replies
View Related
Sep 17, 2009
I need to perform 2 SUMIF's on 2 columns of data to return a result and I'm not quite sure the best way of doing this. I'll give an example below.
I have 2 columns of data, both numeric and the SUMIF needs to say if H1:H100="10" and also if J1:J100="907". I can perform one or the other but not both.
View 6 Replies
View Related
Aug 5, 2012
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
View 1 Replies
View Related
Jul 14, 2007
I have three cells where a user will input data, in some cases (2T Weld Condition) they will only enter in B12 and C12, but in the case of a 3T weld they will also enter data in the D12 cell. I then use a formula to check for the thinnest material and that is entered into another cell with a formula, B14. I then need to check the value in B14 to verify if it is above zero, but below 0.65 (mm). If it is then I would like to have a message appear on the screen notifying the user that they are outside the acceptable range.
I cannot figure out how to use the information in cell B14 because it is a formula and my code only works with a direct value. The code I am using works if I point to one of the three input cells, B12, C12 or D12. How do I use the information in B14 to work with the code below.
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "$B$12" Then
If Target.Value < 0.65 Then
Run "MyMacro"
End If
End If
End Sub
MyMacro loads a userform with buttons, etc.
View 4 Replies
View Related
May 5, 2013
I have a spreadsheet that has about 50 sheets and a summary sheet at the front the layout of the summary sheet is column A has skill sets from A4 to A20 and across the top it has week commencing dates from F3 to about BA3 (dates go from w/c 06/05/13 to 08/12/14). On the other sheets they have the dates in the same columns but the skill sets vary as to each project, some projects may have two of the same skill set in column A because there is two people needed who can do the same thing, I need to total up the days over the sheets for each week and skill set.
I have been using the SUMIF formula as follows:
=SUMIF('Sheet2'!A8:A10,'Summary'!A4,'Sheet2'!F8:F10)+SUMIF('Sheet3'!A8:A15,'Summary'!A4,'Sheet3'!F8:F15)
And so on for each sheet and then change the formula for the next skill set and then again for the next column.
Is there a way of doing this without having to enter a formula into each cell, at the moment I am coping and pasting the formula into word to do a find and replace to change the SummaryA4 to SummaryA5 etc and then into the next cell for the corresponding date.
So to make this seem like it makes any sense I am looking for say an 'Administrator' in all the project sheets over all the dates and for it to add it up for the summary sheet. Under the corresponding week against the skill set.
So it would be F4:F20 for w/c 06/05/13, G4:G20 for w/c 13/05/13 and so on until all skill sets.
View 5 Replies
View Related
Mar 10, 2012
I'm not sure why this macro in workbook "A" is not working when checking for the activesheet sheet opened in workbook "B"? I've included the tab name I'm looking for and the tab name opened in the workbook "B" in the MsgBox to verify it can pull the tab names properly in workbook "B" and it returns correctly. I'm not sure why the If Then Else is not working if that is the issue here.
Code:
Sub testmonthcheck()
Dim art156 As Workbook
Dim mm As String
Dim mmm As String
Set art156 = Workbooks("Actual_Run_Times_156.xls")
[Code] ........
View 1 Replies
View Related
Jun 24, 2014
I am trying to create a macro that will create a number of check boxes, which are linked different cells. I have had some success in creating multiple check boxes and having them at the destination I want the problem is that instead of linking to different cells they are all linked to the same cell. I have attached a sample workbook SAMPLE.xlsx
View 1 Replies
View Related
Feb 10, 2010
Is there a more efficient method of coding this?
View 3 Replies
View Related
Dec 18, 2009
I have included my budget so helpers can see it. I am trying creating a formula on mini-dashboard on A8 (Under the total budgeted amount) that will check the total budgeted amount based on the values I enter on the categories sheet. Of course it will be controlled using the drop down menu on A2 on mini-dashboard. I thought I had this working with a sumif function but it seems to have quit working.
View 2 Replies
View Related
Aug 10, 2012
I have data in Row 53 that spans 7 columns, but stays in the same row. I want to design a loop to select every 7th cell in that row and check if it is empty. If not, add onto a "counter" then display the final number of occupied cells (the value of the counter) at the end. This is what I have so far, but I get all sorts of errors.
Code:
Sub Tester()
Dim WB As Workbook
Dim WS As Worksheets
Dim modCounter As Long
Dim Cell As Range
Set WB = Workbook("Transverse Series.xlsm")
Set WS = WB.Sheets(BM18)
[Code] ......
View 1 Replies
View Related
Sep 25, 2011
I am using a spreadsheet for a weekly football league. I would like "Sheet 1" to have the picks for the current week with the point total at the bottom for each team (I have that set up), but on a different "Sheet" I would like to keep a running total for each team. I know how to creat a formula for the total points, but how do I get that formula to attach to the corresponding column on the same row.
EX:
A B
"Team Name" "Formula for total points"
I would like A and B to stay connected when I auto arrange them in numerical order.
View 1 Replies
View Related
Sep 6, 2013
I have twelve sheets that each have a total score on cell G10 that I want to have copied to a thirteenth sheet in a specific column (F5-16). What would I have to do to make that happen? The G10 cell is an auto-summed cell, if that makes a difference.
Also, is there a specific way to create formulas?
View 3 Replies
View Related
Mar 19, 2005
got work book that has about 20 sheets in it.....there are links throught the workbook. ......one sheet in particular when i go to it, it freezes up...and i get the dreaded "Send Error Report to Microsoft" window"...and we all know what happens next.....excel shuts right down.
I can open the workbook and click on ANY sheet....but when i click on this one particular sheet in the book i get the error message
This work book is a template....its the estimating work book i use at work...and whenever i get a new job to estimate i open up this template.....put in my data and save the workbook as the job title.....so basically i have about 50 of these workbooks......and it doenst matter which one i open.......whenever i go to this one same sheet in any workbook i get the freeze
and the freaky thing about this is it does it randomly....I make save this template (as a new work book) when i get a new job to estimate.....and i never have any problems.......but today for some crazy reason its doing what i mentioned above......it did this about a month ago too.......same exact problem.
when it happened the first time i tried all kinds of stuff, and the only thing that worked was i had to go to windows explore...save all the files to a memory chip.......go to a different pc with my version of windows (XP)....open each file up......re-save it.......go back to my pc...reload it
View 9 Replies
View Related
Sep 9, 2009
I'm trying to protect the contents of columns in multiple sheets in a workbook. I've tried to group the columns ( - months, i.e. sept, oct, nov 09 through to march 10) but when I go to Protection options the 'sheet' protection option is not available, all I can do is protect or unprotect the entire workbook.
I've also tried to protect the workbook, but individually set the specific columns in each sheet to be protected (repetitious but seemingly unavoidable), but this doesn't work well either as there's now a mix of a protected workbook and protected columns, both with individually set passwords to unprotect... which seems a bit silly.
There must be a way around this? - the columns are H, J, K and L, and the entire contents of the summary sheet '2009-10 Financial Year'... basically I'd like to be able to protect all of the contents of all of the cells here, ideally just with one password.
View 9 Replies
View Related
Jun 26, 2013
I am having a hard time searching for this formula.
Sheet1 has the following data in A1:A5
value1
value2
value3
value4
value5
I then have 5 additional sheets.
I want to populate cell D2 on each additional sheet with the values from Sheet1
Sheet2 - Value1 in "D2"
Sheet3 - Value2 in "d2"
and so on...
View 4 Replies
View Related
Dec 11, 2013
Following Excel task I am trying to complete:
I have an Excel file with multiple sheets and I want to find and replace matching cell data on the same row across all of the sheets. For example, I have two columns, Column A and Column C and 10 sheets. I want to only replace the content in Column A if text matches both Column A and Column C on the same row. So, I want to be able to search for the following data across all sheets:
Column A = "car"
Column C = "yellow"
If both "car" and "yellow" are found in Column A and Column C on the same row, then replace "car" in Column A with "truck".
Is there a way to do this automatically as I have few hundred to find and replace?
View 5 Replies
View Related
