I've got my macro working on a workbook called 05-14 Clearing TB-orig. From there, it saves as 2 new workbooks called 05-14 Clearing TB-aging and 05-14 Clearing TB-rec. But the new worksheets all keep the name 05-14 Clearing TB-orig. Can I have the macro change the name of each of sheet in the newly created workbooks so that they are the same as the new workbook names? [URL] .....
View 6 Replies
I have a formula that uses the OFFSET function so that subsequent row adds will automatically adjust the formulas. For example, cell A1 contains the value 1 and cell A2 contains the formula:
=offset(A2,-1,0) + 1
When I insert a row above row 2, the formula above adjusts to reference cell A3, which is what I want.
What I am running into is that when the workbook is opened, something in the workbook changes, causing the "Do you want to save the changes..." popup to appear even though all I do is immediately close the workbook.
I have traced the problem to my use of the OFFSET function, as when I change the formula to
=A2-1
and repeat the scenario, the workbook closes without the "save" popup.
Does the OFFSET function cause something to change (no cell values appear to have changed) and is there a way to get around this?
I have a workbook that contains 50 worksheets named 1-50. I need to add more worksheets. all the formulas in the worksheets always refers to the previous worksheet.
How can i make a copy of the worksheet named 50, name it 51 and have all the formulas in worksheet 51 refer back to worksheet 50?
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
Dim MyText As String
MyText = Environ("username")
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
an event macro to change the font colour of a cell whose value changes as a result of a calculation.
View 9 Replies View RelatedI have code that i use to copy a worksheet of information in one workbook to a worksheet in another workbook. All i need is some guidance on how to copy a second worksheet from workbook 1 to a second worksheet in workbook 2. Should be fairl straight forward.
In the below i am copying the sheet Phone_data to a second work book sheet also called Phone_Data, i would like to include in the same proccess a sheet called Sur_Data from workbook 1 copy to a sheet called Sur_Data_R in the second. All the other features like find next empty row also apply.
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.
=INT(((C2-1461)- SUM(MOD( DATE(YEAR(C2-MOD(C2,7)+3),1,2)-1461,{1E+99,7})*{1,-1})+5)/7)
I am working with multiple workbooks with several tabs in each one. I need the forumula to update the "sheet name" from the source workbook even if the destination workbook is closed.
this is a portion of the forumula I am working with:
=SUM(IF(AND([L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4>=182,[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet25!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet26!$I$4=182,
[L2_EI_Phase_II_monitoring_workbook.xlsx]Sheet27!$I$4
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
View 3 Replies View RelatedWorkbook contains the following sheets : PIR TrackerChartsSAMPLEFINALValidations
When a change occurs on PIR Tracker, the following occurs:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Application.ScreenUpdating = False
Dim Rng As Range
Set Rng = Intersect(Target, Range("A1:A500"))
[Code] .....
I also want the pivot tables on SAMPLE and FINAL to be updated. What do I need to do?
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
View 3 Replies View Relatedlooking to only allow a check ("x") in a column for a reconcile - type worksheet. Am I close?
Private Sub Worksheet_Change(ByVal Target As Range)
'Data protection. Only allow "x" in the "cleared" column. If anything else is entered, a message box informs the user
'and the cell contents are cleared.
Dim val As Variant
Dim msg As String
If ActiveCell.Value "x" Then
msg = "You can only enter an X in the cleared column."
ActiveCell.ClearContents
End If
End Sub
I have an open workbook (A) and this is where the code should reside. I want to use VBA to copy the content of an entire worksheet from a closed workbook (B) to an existing worksheet in workbook A. How would you accomplish this?
View 7 Replies View RelatedI am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
View 4 Replies View RelatedI need to copy a range of values (actually two ranges). The ranges are of fixed size. Le't say A2:D20 and E2:H20.
Both workbooks have the exact same layout, and they both have the same named worksheet (in this case it's called Entry). However the actual filename of the source workbook is unknown. I know numerous users have changed the filename of the xls file.
I want to instruct them to open the old and new workbook, and open a third workbook containing the copy macro, they run the macro and it copies the data.
How can I reference a known worksheet name but of an unknown workbook name esp when the source and destination share the worksheet name?
Is there a way to either change this so that it lets me to select the whole area or a way to make a macro to do what this does to one cell?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Not Intersect(Target, Range("M13:IR458")) Is Nothing Then
Select Case Target.Value
Case "1"
Target.Font.ColorIndex = 20
Target.Interior.ColorIndex = 10
Case "Good"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 35
Case "Stable"
Target.Font.ColorIndex = 2
Target.Interior.ColorIndex = 27......................
I have a sheet named sheet9 and i want to copy the data from this workbook-sheet9 to a workbook called import data and sheet named "database".
View 5 Replies View RelatedI am trying to transfer a value from the active worksheet in one workbook to another workbook. I keep getting a subscript out of range error on the line that uses activeworksheet command when I run my code.
View 3 Replies View RelatedI have a Excel workbook with two sheets - 'MainDataSheet' and 'ArchiveSheet' .
The 'MainDataSheet' has 5 columns and one of the column is 'status'.
The 'MainDataSheet' will have a command button 'MoveData' which will trigger the VBA macro to move data rows from 'MainDataSheet' to 'ArchiveSheet' . Only the rows having value set to "MOVE" in the 'status' column have to be moved.
On my Sheet, A4,A5 are positive numbers, I would like to write some code that watches a Range of Cells ("B5:B35") which are entered as negative numbers. The person cannot enter more negative values than there are positive. I know how to write the msgbox, and go from there. I would like some help with how to write the code to make sure no one uses more time than allowed. This is difficult to explain but I can add more if you would like.
View 9 Replies View RelatedI have a shared Excel Workbook, and I am trying to prevent a non-permitted user from making any changes to it. I have managed to hide all of the worksheets bar one - The Warning Page - if the user is not one of my chosen users, but I am having a little trouble setting the worksheet to open as "read-only" if the user is not one that I have listed.
My macro code looks a bit like this:
If Application.UserName = "Vikki" Then
Sheets("Warning!").Visible = False
Sheets("Total").Visible = True
Else
Sheets("Warning!").Visible = True
Sheets("Total").Visible = False
ActiveWorkbook.ChangeFileAccess Mode:=xlReadOnly
End If
But when I am using this, a non-user will get a msg box asking if they want to save the workbook before changing to read only. Can I prevent this msg box from appearing?
how to do this massively, without going into each cell? Maybe some VBA code. I just need to change the beginning of the path to point to another directory.
View 9 Replies View RelatedI'm having a problem with calculating my formulas. I have it set to auto. I've always had it there. And it used to work fine. But now when I calculate, anything I do to another cell not associated with the ones I'm calculating it makes it recalculate. How do I keep it on auto without making it recalc everytime I do something? Mainly I have an override command on another sheet that enables you to replace the info in a cell (on a diff sheet) if you dont like the product of the calculation. When I make the override for that one cell it recalcs all the info. I just want it to recieve the override for the one cell with recalcing my others.
View 3 Replies View Relatedi have as many as 100 workbooks in the same folder(such as "e:/data"),i should change the same address value in each workbook. first i write the code use "application.filesearch",but it can't run because it has removed FileSearch in excel 2007. i get the code below from Ron de Bruin
Sub test()
Dim wbOpen As Workbook
Dim ws As Worksheet
Dim I As Long
Dim myfiles() As String
MyPath = "e:data"
If Right(MyPath, 1) <> "" Then
MyPath = MyPath & ""
End If
'If there are no Excel files in the folder exit the sub
FilesInPath = Dir(MyPath & "*.xl*")
If FilesInPath = "" Then
MsgBox "No files found"
Exit Sub
End If...................
I am aware that I can use single changing events in worksheet change events. For instance, if column 1, or A is changed, do something. This is only a single If statement, i.e. either the condition is true, or not. What I am not sure is if I can use two changing events, i.e. two conditions. For e.g. I would like if Column A value is X and Column B is "Active", action it, but only if two conditions are true.
For.e,g. The below syntax does not work. If it is only column A, it does work, but I want both A and B to be true, then copy and paste the target does not anything.
VB:
If Target.Column = 1 Then
If Target.Column = 2 Then
If Not Intersect(Target, Range("A2:A" & Rows.Count)) Is Nothing Then
If Not Intersect(Target, Range("B2:B" & Rows.Count)) Is Nothing Then
If Target.Value = "X" And Target.Value = "Active" Then
I want to input a column of formulas where the part of the formula which changes on each row from the row above is the worksheet name. I want the cell ref to remain the same
ie
formula in B6
='WC - 23-03-09'!J2
formula in B7
='WC - 30-03-09'!J2
The sequence of the worksheets should follow the sequence as they appear left to right in the worksheet bar at the bottom of the page.
I was looking for a way to "fill" in the rest of the column where its the worksheet which changes sequentially in the formula rather than the cell ref
I am trying to run the below code whenever the result of cells (22,x) changes. Cells (22,x) contains a formula.
[Code] .....
what is wrong with this code. Range("ActiveSheet.!D3") = Me.TextBox9.Value. Basically a new worksheet is created using a form and it renames itself but i also need to change cell "D3".
View 2 Replies View Related
