I want to input a column of formulas where the part of the formula which changes on each row from the row above is the worksheet name. I want the cell ref to remain the same
ie
formula in B6
='WC - 23-03-09'!J2
formula in B7
='WC - 30-03-09'!J2
The sequence of the worksheets should follow the sequence as they appear left to right in the worksheet bar at the bottom of the page.
I was looking for a way to "fill" in the rest of the column where its the worksheet which changes sequentially in the formula rather than the cell ref
Each petition can generate several tasks, one line per task.
John Doe | XXXX-YYYY | NCO John Doe | | RIL John Doe | XERT-WWWW | RMT Jane Doe | QSZE-AQWC | RIL
On the second worksheet:
Complete list of agents | number of petitions | Status
John Doe | 2 | OK Jane Doe | 1 | [BLANK]
I want to be able to fill in the second worksheet automatically. For each agent in my worksheet 2, I want to check if they appear in worksheet 1 and if so count the number of petitions related.
I'm looking for some code to change a cell's fill colour
eg. by selecting an individual cell in a range, say A1, the colour of a cell, say K1, in a corresponding range changes to yellow or if I select multiple cells, say A1:A9, the colour of cells K1:K9 change to yellow
i have some existing code which is trigerred when anything is input into column c. The code then adds various information in another three columns. One of which pastes a vlookup formulae, and i would like this forumlae pasted into the column c cell which i initialy edited, in order to remove the requirement for one additional column.
The existing code i have is:
Code: Private Sub Worksheet_Change(ByVal Target As Excel.Range) Dim MyText As String MyText = Environ("username") If Target.Cells.Column = 3 Then With Target If .Value "" Then .Offset(0, 2).Formula = "=VLOOKUP(D:D,'P:TAOffshoreTAOffshoreTreasuryRecsGeneralCommit ID''s for control Sheet - Do not move or delete[commit ids - DO NOT DELETE OR MOVE.xls]Sheet1'!$A$1:$B$65536,2,0)"
[code].....
I have tried changing the offset to (0,0) or changing the offset to 'target = ', which does add in the vlookup but then the macro debugs at the 'If .Value "" Then' code?
I suspect that I can do this with the "Custom list" under "Option", but I need a way to make it more automatic. Otherwise I will write down the whole thing in there instead of making it easier.
Function BG(InRange As Range) Range("InRange").Select With Selection.Interior .ColorIndex = 6 .Pattern = xlSolid End With End Function
That so far but not quite sure why that isnt working. I want to change the fill color with a UDF that all they do is select a Range and it changes those fill colors to whatever the Colorindex may be. I didnt find anything while searching the forums with this already.
I have a code i want to fill down a column, but have the row change to the corresponding row it's on
So for example, the code is '= code128(A7)' on row 7. How to fill it down, but they ALL say (A7) on row 8, i need to change it to '(A8)' and next '(A9)' and so on.
Attached is book in which, when a choice is selected from Drop Down list in ColumnF the macro has to do the need.
When the macro was written it was working well. But when I tried to change it as a Worksheet_SelectionChange event nothing is happenning even though a choice is selected from drop down list.
Basically the situation I have is Sheet2 has many references to cells in Sheet1. Sheet2 is for all intents and purposes a kind of nicely formatted report form, and Sheet1 is the input form.
My ultimate goal is to automatically resize row heights on Sheet2 when cell contents change on Sheet2.
Using a worksheet_change event isn't working I presume because it doesn't see the formula output change as a worksheet change, the worksheet_change is firing only when the input is changed in Sheet1.
how can I capture these formula output changes on Sheet2 (triggered from input on Sheet1) OR is there a way of making a particular sheets rows always adjust in height to best fit?
How would I add this formula as a worksheet function with VBA. I can't see INT, MOD or Year in VBA. Also want to change C2 to change to activecell column + row 2.
I have a spread sheet with various tick boxes, that when ticked calculate an accumulative percentage in a cell. This cell is the basis of my graph. e.g. if the cell displays 80% - the chart with show 80% - simple.
however, I want to write a vba code that changes the fill colour of the chart depending on the percentage.
i.e. if the percentage data = 0-49% I wish the chart to display as red. 50-69% - yellow and 70%+ = green.
2 Questions here...(Entire macro is at the bottom)
QUESTION 1 - In line 4 of the code below, in Column B, how can I get this code to auto-fill ONLY equal to the bottom-most row with any data in column A? Note that it's never exactly "B254"
QUESTION 2 - How can I change these 3 lines of code...
If I use Conditional Formatting I can only use 3 colors, I'd like to use 8 or 9. Is there another way to do this without using the Conditional Formatting?
I am busy with a project using VBA to populate a spreadsheet based upon the data entered into a particular cell. The problem that I am experiencing is that I populate the initial cell via a combo-box which I cannot exit unless I click elsewhere with my mouse. The code that I am using to populate the other cells is as follows
Private Sub Worksheet_Change(ByVal target As Range) Application. ScreenUpdating = False On Error Goto dump Dim r As Range, MyRowNum As Long, ws1 As Worksheet, ws2 As Worksheet, strPriCode As Variant, _ strNAPPIE As Long, strSInCost As Currency, strSInDesc As String Set ws1 = Worksheets("SINVOICE") Set ws2 = Worksheets("STOCKIMP") Set r = ws1.Range("B11:B35") If Intersect(target, r) Is Nothing Then Exit Sub If target > 0 Then....................
I have set up a rollover hyperlink so that when I hover over the cell it changes colour and creates a good effect. To do this I have another cell on the sheet that turns to 1 when the cell in question is hovered over.
I need a code so that when that cell displays the number 1. the object (which is rectangle 2) changes from white fill. to a picture I have saved on my desktop.
I cant quite figure out the coding and have been messing about with things like..
if cell range e.g a1 = 1 then rectangle 2 .userpicture " path " else .solid etc.
I'm recording a macro, so a line in my graph is a specific green. The marker fill won't retain the green, it always ends up blue. the lines and marker line is green. no matter what color I try the marker fill will always be blue. How to correct this?
I am aware of the ColorIndex, but more specifically I need to change the fill color of a cell that is 9 columns to the right of the active cell. I can't find out how to make this work. to clarify:
I am fairly new to macros and have trouble with VBA. I have a file with multiple worksheets. Each worksheet contains the name of a specific location in cell A8. I want this name in cell A8 to be the name on the worksheet tab for each worksheet in my file but do not know how to accomplish this. Is that even possible?
Workbook contains the following sheets : PIR TrackerChartsSAMPLEFINALValidations
When a change occurs on PIR Tracker, the following occurs:
VB: Private Sub Worksheet_Change(ByVal Target As Range) Application.ScreenUpdating = False Dim Rng As Range Set Rng = Intersect(Target, Range("A1:A500"))
[Code] .....
I also want the pivot tables on SAMPLE and FINAL to be updated. What do I need to do?
The colour of the percentage cell changes according to its percentage. I would like the S/N cells to have the same colour as the total percentage cells automatically. (Even when the percentage updates)
Secondly, for the cells under "Target", if the target dates are 1 day before today(the current date on a particular day) and the actual date is not filled, the cell fill will turn amber.
If today is on or after the target date and the actual date is not filled, the cell will turn red.
However, if the actual date is filled, the target date cell will be filled green, overwriting the above two condition.
Let's say I have column C blank, but every time it's filled in with something I want column A to be today's date and B to be current time. Unfortunately, the functions NOW() and TODAY() don't give me what I want. They get recalculated every time that I update the spreadsheet. Another thing that I can do is just press ctrl+shift+; to generate a non changing date/time, but I want it to happen automatically (being super lazy).
In cell A1, I have the month number (eg, 1, 2, 3,). The month number reflects current month and will automatically change with every month. For example, right now it’s 6, next month it will automatically change to 7. Each two columns in Range A10:X20 represents the data from January to December. I want to use a worksheet event to change the background of the current month two columns in the range to yellow color and the two columns in the range will be visible when I activate this sheet.
How can i fill my combo with the values i have stored on myarray?
Code: Sub help() Dim x As Single Dim myarray() myarray = Array("QQ", "BBBB", "CCCC", "QWERTY", "ASDFG", "ZXCVB") Dim Combob As OLEObject Set Combo = ActiveSheet.OLEObjects("Combo1")'dropdown("combo1")
