I'm trying to change 115 charts so that the Xvalue axes (Y-axes) will start on the lowest value of my data series. This is what I've come up with so far:
[Code] .....
What is the syntax to set instead of X so that all Xvalue axes is set to the lowest Data series value in individual chart?
So I have this given: Screen Shot 2014-06-23 at 3.53.01 PM.jpg and I am trying to fit my data to the graph I have in excel below. There is only one x-axis; suction pressure. However, there y values are dependent on two variables, discharge pressure and outdoor air temp.
How can I make the data on this sheet: Screen Shot 2014-06-23 at 3.53.05 PM.png
dependent on both axes?
Im plotting data on a Line-Column 2 Axes Chart which works really well with 4 data series (2 column, 2 Line) but when adding a fifth data series, the fourth disappears from view. I can see its still there cos I can display the values but I cant get the line to appear. The values for the 5th series are also similar to other series values so its not like the chart cant display it....are there limits to the number of series on such a chart?
View 9 Replies View RelatedWhat is the syntax for the formula for the minimum number, greater than zero, in a series of numbers.
I have a row of numbers, including some zeros, but I want the minimum number excluding the zeros.
I'm trying to use solver to find the minimum value of a cell by changing 5 separate cells. These cells are subject to a set of constraints that are formulae. On top of that I have a large number of these solve's to run (The spreadsheet is creating randomly distributed data to form a Monte Carlo simulation). Therefore I am referencing the formulas using the ActiveCell, Offset() function. For some reason when running this code none of the values are changed. Also I changed the UserFinish to false so I could see what solver was doing at each solve, It stops at the correct cell (one after the final cell) but without me having to confirm it each time.
Here is the ....
I have a spreadsheet which reports across different categories, but there's a lot of info. So simplify this, I've written a simple macro that changes the series range in an existing chart, so top level and by category. This works well apart from I'm using excel 2007, and some people aren't, so the default colours look fine on my version, but change to some awful colours on anyone with an earlier version of excel. I need a way of changing the colours to standard ones depending on which macro is being run.
I have tried running the following, but I get an error, basically saying the series hasn't been selected.
ActiveSheet.ChartObjects("Chart 6").Activate
ActiveChart.SeriesCollection(3).Select
ActiveChart.SeriesCollection(3).Interior.Color = RGB(255, 0, 0)
i have a chart on a worksheet, it contains multiple series (3) in which i wish to change the values/ range of each series of the chart through vba. Thus far i have struggled due to the lack of intellisense, in which i tried
Worksheets(1).ChartObjects(2).Chart.Series("Fails").Values = Range("b12:b14")
with "Fails" being the name of that particular series.
I am trying to create/modify an XY scatterplot using VBA.
I declare local variables and point them to the chart and a new data series for the chart, such as:
Dim chartone As Chart
Dim chartseries As Series
Set chartone = ThisWorkbook.Charts("Chart1")
chartone.ChartType = xlXYScatterLines
Set chartseries = chartone.SeriesCollection.NewSeries()
I set the series data, using an array, such as:
chartseries.Values = Array(1, 3, 5, 7, 9, 11)
I can set the Xvalues to a set of dates by setting .Xvalues to a woksheet range that includes date-formatted data. (like this):
chartseries.XValues = Worksheets("sheet3").Range("m9:m14")
(where m9:m14) contains dates...
I have a chart with 5 different series. Instead of editing each one, say the marker size, is there anyway I can change the marker size for all of the different series at the same time?
View 1 Replies View RelatedI have a series of numbers in one column. Is there some way I can divide all the numbers together by, say 10, without doing it manually?
eg.
12
15
15
25
20
should become
1.2
1.5
1.5
2.5
2.0
Is there a way in Excel to do that?
I'm trying to change the default option for the data series when graphing in Excel 2003 .... I am trying to create a line graph
Excel, by default, is putting static pressure on the x axis and the air flow on the y axis .... I need it to be the other way around
I have found out that:
By default, Excel plots whatever you have fewer of—rows or columns—as the data series
apparently it is possible to change this Excel default option, but I can't figure that out
in step 2 of the Chart Wizard, I have tried many different things, but can't get Excel to chart the Air Flow CFM on the x axis, and have static pressure values on the y axis
I still get the 'Object doesn't support this property or method. Error code 438' error. I am using Excel 2010
VB:
j = 3
Do Until j = 6
ActiveWorkbook.Sheets(k).Activate
Set chartX = ActiveSheet.ChartObjects("X")
[Code]....
The macro is supposed to dynamicaly adjust series range for 3 charts for x,y,z, values in each of sheets. Charts are a line type.
I have a small problem using the ‘sumproduct function’ which I am using it to calculate the area under curves using the following equation (=SUMPRODUCT((B10:B109-B9:B108)*(D10:D109+D9:D108))*0.5). However I have hundreds of curves to calculate the area under and the length of the data series for each curve is different, I am currently changing the length of the data series by hand. I have attached an example worksheet of 2 sets of data (the formula I am using at the moment is highlighted in blue – row 203). Is there are function or formula that I can use inside this equation to change the range of the formula depending on the length of the data series?
View 2 Replies View RelatedAttached is a print screen. I'm struggling with using the min function in vba. I want it to find the minimum cumulative cost in week 0 out of the first three, and the copy the permutations of it (1,0 or 1, 1 , e.t.c.) to Week one column C & D of the model.
View 3 Replies View Relatedmy VBA code does some simple editing. Something I would like it to do is make the x-axis and y-axis lines be editable. What I mean is say for editing the Plot area background you would use this
ActiveChart.PlotArea.Format.Line.ForeColor.RGB = RGB(0, 0, 0)
I am looking for the equivalent to do the x and y axis lines.
I am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
T. A1 B1
Sample 1 1.2
Sample 2 2.1
Sample 3 1.7
Sample 4 5.6
I've got an excel worksheet that contains charts 5-14, each with different max axes on primary and secondary scales. Right now the code below works to adjust the axes, however I have pasted this into a script 10 times, once for each chart with different references to the chart number, the max primary axis and max secondary axis. how I could write the following as a loop so that I don't need to have to repeat this routine in my code?
Sub ChartsBillingsShare()
ActiveSheet.ChartObjects("Chart 5").Activate
With ActiveChart
.HasAxis(xlValue, xlPrimary) = True
.HasAxis(xlValue, xlSecondary) = True
End With
ActiveChart.Axes(xlValue).Select
With ActiveChart.Axes(xlValue)
.MinimumScale = 0
.MaximumScale = Range("Y6").Value
End With.................................
I'm trying to write some code to make an existing chart display the correct series of data. However, on the ".SeriesCollection..." lines, it gives me the error "Object does not support this property or method." I'm using a Bar-Line graph, if it makes any difference.
View 5 Replies View RelatedI have the theoretical set:
year $ %
2003 100 10
2004 120 20
2005 145 30
2006 205 40
2007 300 50
Could I make the year the X-axis and make 2 y-axes on the same graph in excel that each datasets would be correlated to (eg. for money it'd be from 0 to 300 while for percent it'd be from 0 to 50)
For an economics assignment I would like to graph price elasticity with price on the 'y' axis and units on 'x'. I have not found a way to do this in Excel, can someone assist?
View 6 Replies View RelatedI'm trying to create a code that when run hides a selection of columns and defines the minimum and interval value for a chart on the active worksheet. My attempt is assigned to the 'update skills' button at the top of the "GRAPH" worksheet of the attached workbook.
View 2 Replies View RelatedI want in A1 to find minimum SUM if no minimum number in row.
Here is example attached: ...
I run a large simulation experiment. I have a loop plotting data in excel of a user defined area. Because of the limit of 255 series I have allowed a maximum of 250 simulations (they all need to be plotted). But the length of each simulation is free. I know there is a limit of 32.000 data points in a graph and I have this as a condition too.
If I set the data range to 100 columns and 3000 rows the graph is produced when I plot by columns. (code below)
But if I set the data range to 250 columns and 1000 rows I get the above mentioned error message. Even though I only have 250 series.
After the data is plotted it is the code below that gets the error:
[Code] .....
I have the following code:
Sub Macro5()
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveSheet.ChartObjects("Chart 243").Activate
ActiveChart.SeriesCollection(1).Delete
ActiveChart.SeriesCollection(2).Delete
End Sub
However, if there is no SereisCollection(1) actually present in the chart I get an error. How can I work around this? I will need an IF statement I assume, just not sure what it will look like.
I just recently installed Excel 2007 and I would like to know if it's possible to change all data points of a chart at the same time. In Excel 2003, I would normally hold down shift while clicking on each of the data points to make a global change. However, it appears I cannot do that in 2007.
I would like to display each data point's series name. When I go to Layout on the Excel Ribbon, and click on "Data Labels", and click on "More Data Label Options", the actual Y-axis values are shown for each data point. However, I do not want this - I actually only want the Series Name, but when I uncheck "Value" and check "Series Name" instead (under "Label Contains"), it only changes it for one of the series. Is there a better way, instead of going through each and every single series to make this change?
The following code is supposed to produce six series on an xlXYScatter chart. It produces seven with the seventh series being a repeat of the sixth but named series 7.
Sub Chart2()
Dim DataRange As Range
Dim CellString As String 'Stores a cell range in the form "AA27:AB39"
Dim CurrentSeries As Integer
Dim SeasonCount As Integer
Worksheets("Hemisphere").ChartObjects(2).Activate
CurrentSeries = 1 ............
I have a list of data on one sheet and a 'reports' page on another sheet. The reports page has several pivot tables and a pivot chart. I want the pivot chart to format the bars on the chart relevant to the series name. The series names are "R" "A" amd "G" for Red Amber and Green respectively, I want the chart to change the colour of the series so that it is the correct colour ie. "R" would be coloured Red, "A" would be Amber and "G" would be green.
Sub PivotLoader()
Dim Red As Integer
Dim Amber As Integer
Dim Green As Integer
Red = Range("H9").Value
Amber = Range("H10").Value
Green = Range("H11").Value
Range("B8").Select
ActiveSheet.PivotTables("PivotTable4").PivotCache.Refresh
Range("D25").Select
ActiveWindow.SmallScroll Down:=18
Range("B49").Select...........................
I have had a lot of luck finding what I need from the search areas, and I even found some information on the formula I am trying to build. The problem is I don't understand it and I need some help. First let me set it up for you. (I do not know the formula)
If cell L125 is has a value >0.00, I need to locate the smallest value the range of cells C125:F125, I then need to subtract L125 from that number, otherwise enter nothing.
This really has me baffled. I tried and I tried but it will not find the smallest value then subtract L125.
I consider myself decent at Excel, but I don't have quite the depth of knowledge I would like. Here is my issue:
I currently have a series of 50 numbers for each row on a 300 row spreadsheet. I would like to write a formula that identifies the six largest numbers in that series and adds them together. So, for example, if the series was 8-6-4-4-4-5-1-1-0-15-3-9, the formula would spit out 47 (15+9+8+6+5+4)
How do I write that kind of formula?
I would like to have two series of data using the same X axis (date, formatted in months). The Y axis is in intervals of 100,000.
The first data series is historical (actual) data (i.e. Jan 2009 to August 2011). The second data series is forecast (Sept 2011 - August 2012). So i want the forecast series to start immediately after the historical series. It is a 'line with markers' chart. The key objective is that the forecast data looks visually distinct from the historial series.
Excel version: Excel 2010
OS: Windows 7