I have used named ranges to make a chart automatically adjust to a changing list of products in one column, but I do not know how to do this with multiple series. If I want to add products to this table, how can I make my chart dynamically adjust multiple series?
So the chart range is currently E5:H10. But I would need it to go beyond row 10 when I add new items.
building dynamic charts and filters, so What I'm hoping to accomplish to build a bar chart that looks like the following: ________________________________________________ Filter: State | Filter: Region | Filter: Segment |
Revenues |||||||||||||||| + (% of Total Rev) COGS ||||||||||| + (% of Total COGS) Margin |||| + (% of Total Margin) -------------------------------------------------------
My data is built in the following format on a different tab than the proposed chart:
State: | Region: | Segment: | Account: | Amount: | MN | Midwest | Major | Revenues | $$$ MN | Midwest | Major | COGS | $$$ MN | Midwest | Major | Margin | $$$ MN | Midwest | Major | % of Total Revenues | %%% MN | Midwest | Major | % of Total COGS | %%% MN | Midwest | Major | % of Total Margin | %%%
[Code] ........
It seems like it'll be easy to use a pivotchart, but at the same time, there's a lot of formatting to do, which makes it tricky, especially if I have many states to deal with and the multiple combinations.
I have several dynamic charts using named ranges, but I am charting 1 series of data. What about when I have multiple data sets or series and do not want to use PivotTables? Do I really have to make each one a named range? If that's the case, using VBA looks much simpler.
I have created a dynamic chart for multiple series. I have created this using the offset function and have named 20 ranges. The problem I have is that if only 19 of the 20 named ranges are populated it reads that the worksheet contains one or more invalid references.
I have a log where I'm recording daily readings of a pipette. Each day three readings are taken and I have each stored as a dynamic range so that I can monitor how in control my process is. However, when I graph it, I would like it to be one continuous line graph (Three readings from day one followed by three readings from day two, etc.). I'm having difficulty doing any sort of combination.
When i add a month coloumn,Sparklines and Average coloumn should get updated automaticaly.Now this is not happening even if the data is in table format.I also want the graphs to be automaticaly updated.
i am trying to add 50 new data series and it takes hell of a lot of time to do it manually.
Sub Macro6() Dim total As Integer Dim Taper As Integer Taper = 2 Do Until total < 100 total = total + 1 Taper = Taper + 1 ActiveSheet.ChartObjects(" Chart 3").Activate ActiveChart.PlotArea.Select ActiveChart.ChartType = xlBubble ActiveChart.SeriesCollection.NewSeries ActiveChart.SeriesCollection("Total").XValues = "=Data!R" & Taper & "C6" ActiveChart.SeriesCollection("Total").Values = "=Data!R" & Taper & "C8" ActiveChart.SeriesCollection("Total"). Name = "=Data!R" & Taper & "C9" ActiveChart.SeriesCollection("Total").BubbleSizes = "=Data!R" & Taper & "C7" Loop End Sub
I have a chart with coloring for specific series sets. When I create a similar chart, can I copy the formatting from one range to the other? Why does it default to certain styles?
I have a combination column and line chart with the line series on the secondary axis. Is there a way that I can tell excel to scale the secondary axis so as the line always appears above the columns? As it is it appears above in most instances but sometimes appears below the columns.
The charts I received have many Series formulas that reference and external spreadsheet
Is there a way that I can modify them and reference the same sheet name but locally
For your information When selecting menu Formulas and then "Show Formulas" chart data series do not display When selecting a Chart the "Show Formula" selection is not available (at least I did not find it) In addition, when selecting the Chart, Then Design, then "Select Data", it replies in the pop-up with the comment "The data range is too complex to be displayed...."
There are about 40-60 formulas as shown below!! The sheet name with data is D_Brand_Q
HTML Code: ' here is a sample of the current formula =SERIES('C:2011-12-Jul-Nov[2011_06_Sales.xls]D_Brand_Q'!$CC$1,'C:2011-12-Jul-Nov[2011_06_Sales.xls]D_Brand_Q'!$E$197:$E$218,'C:2011-12-Jul-Nov[2011_06_Sales.xls]D_Brand_Q'!$CC$197:$CC$218,2)
I have a xy chart with two sets of data, New and Reference. I want New to be the first entry in the legend and to show up on top when the two lines overlap.
i have a chart on a worksheet, it contains multiple series (3) in which i wish to change the values/ range of each series of the chart through vba. Thus far i have struggled due to the lack of intellisense, in which i tried
The column on the left is NOW() output and the one on the right is data corresponding to the given date and time. You may interpret the above data as snapshots taken at regular time intervals.
Now what I want to do is make a chart with the above data. Where ever there is a break in the snapshots, represented by a blank line, I want the graph to jump to the next data point much as the way stock prices move from the closing price to the opening price on the next day. I am not able to figure how to do that. Since I want the x-axis to represent time, using scatter charts does not work since the intervals are not proportional to the time then.
I would like to display the latest data label value for a data series So if I update my table for period 2 the chart should update to display only this value. Then period 3 and so on Workbook attached
I am applying for a job as an executive assistant and before the interview I have to complete a "test." I am having trouble with one direction. Here is the question:
"10.Apply series name and legend key in data labels to the Star data series. "
I have included what I think is the correct answer, but I am not sure. It is under the column chart sheet.
I have a chart with 5 different series. Instead of editing each one, say the marker size, is there anyway I can change the marker size for all of the different series at the same time?
I'm trying to use VBA to automatically change the data displayed in an excel chart. To do this I count the number of items displayed on the chart using Chart.Seriescollection.Count. I then loop over the Chart.Seriescollection(x) and try to change the Chart.Seriescollection(x).Formula string to link to the cells I want.
Problem is that, sometimes, the cells the curve is currently linked to are empty. Such a curve does show up in the Count, but I can't access the .Formula, even though this can be done manually from within Excel.
I have a spreadsheet that calculates a value for each age up to 65 on a separate row. I have parameterized the spreadsheet so that depending on the age entered by the user, any row below the age 65 calculation row is blanked out (set to "") with an if statement.
After a new age is entered I would like a line graph to compare the values. My problem is that if I select all of the possible data values (I assume none are less than 20, therefore there are 45 rows of formulas) any rows that have blank values show up in the chart. My data starts in cell A1.
I would like to come up with a macro that accomplishes the following . . .
- determines the number of the lowest row that has a number value in it (since there are formulas below this, Ctrl down does not do this correctly)
- set a named range starting from cell A1 based on x rows (calculated in the prior step) and y rows (constant)
I've just read up on interactive charts and have got that sorted for my worksheet. But I have a slightly more complicated issue now...
The worksheet Logistics has results for 76 different tests and these tests have been taken multiple times. Hence, I can logically have a trendline of results for every test i.e. Test 1: 1/1, 2/2,3/3 etc...
I'll go nuts creating 76 charts...and it's a terrible messy way of getting the user to see how he's fared over the number of times he's taken a particular test.
What I'm looking for is a way for the user so indicate which test he wants to see the results for and the relevant results to come up. In other words, on choosing the trendline of results for a particular test. Possible?I saw something similar on a website but am not sure if it was relevant...
I am creating dynamic charts with a data sheet that is horitzonal. My x-axis : =OFFSET('chart data'$B$1,0,1,1,COUNT('chart data'$2:$2)-1), y-axis: =OFFSET('chart data'!$A$1,0,1,1,COUNTA('chart data'!$1:$1)-1). My formulas are giving me #VALUE. Not sure why.
(formatted general not as dates) 1980 1981 1982 1983 1984 1985 1986 1987 1988
I'm running a chiropractic office. In order to see where I've been and where I'm going I keep track of things like new patient visits, patient report visits, cash in, insurance in, etc. I keep track of this on a daily basis on one worksheet. The weekly totals are paste-linked into another sheet. It is this sheet that I would like to use to create a dynamic chart however, in using the OFFSET function to create the chart, the formula counts the 'blank' cells b/c of the paste-link from the previous worksheet.
I have created a dynamic chart, courtesy of the Jon Peltier website. I have 2 problems. No problem with getting the chart to work, the problem comes when I delete the data. I get an error message telling me that 'A formula in the worksheet contains one or more invalid references.' The other problem is that I cannot copy the worksheet to another worksheet in the same workbook. Well that is not strictly true, I can copy it but it wont updat. Any ideas as to how I can overcome this? Any suggestions welcome, apart from 'Don't delete the data then'
i want to create dynamic Excel Charts in one sheet ,The sheeet contain dynamic columns and rows and i want to create for each 4 columns a chart in a new sheet ,i started to try it in VBA and didnt founs the way to select 4 columns as a range, i succeseed to do it with msgboox that the user enter the range but i want to do it in a loop
I have a Defined Dynamic Name which is used to select my data. How do I call that when I create a chart in excel within the data source, so that the data source always refers to this dynamic range.
I have data A B C D E 1 2 3 4 5 9 4 5 6 7
this is so the series names will be the row and for each series the rows represent the data within each of the columns. I have a dynamic range that always selects the whole range called chartdata. How do I put that in the data source when it asks me in Excel 2007 as there is no wizard for seprate x and y ranges in this version.
There is POLICY statement that determine an what ACTION should be applied to a paticular building given a score for "LIFE" & "RISK" which results in varing policies A-D. (The Policy intervention points differs slightly for varing types of building. This excel sheet works just fine, and provides the correct guidance for our engineers by suggesting Policy A-D on input of tbuilding type and LIfe/Risk score. However the Policy is a guide, and they do need to apply a level of judgement with the data close to intervention points.
My Question,
I would like to provide further graphical representation to aid decision making. I have a graph plots the X Axis ( LIFE) 0-100, and y Axis (risk) 0-5 and show the , but what i need to be able to do is dynamically adjust the position where the x&y axis cross, so showing visually the intervention point when different building types are selected.
I am using defined names to build a chart. This is working fine, but I also would like to use a defined name to control the +/- fields for the error bars. The defined names I have set up are correct, and I am able to enter them into the sorce data form but Excel does not display them.
I have a graph that auto updates but sometimes there is only 1 series and sometimes there is 2,3,4, or 5 series. Is there a way to have the graph update accordingly? and only have have the series that are valid be in the key on the graph. Currently the graph keeps all the series in the key even when there isn't any data for it.
Please see attachment. Use sheet 2 for the graph. and use the drop down menu to select catagory. this ia very quick mock up of the concept.
