Changing Order Of Names

Jul 20, 2009

Can this be done with a formula?:

Smith, John

changed to:

John Smith

View 11 Replies


ADVERTISEMENT

Macro To Set The Order In Which Worksheets Should Be Printed (order Is Changing Daily)

Nov 29, 2008

I looked at threads realted to printing but wasn ot able to find something similar to what I need. So here is my problem:

I have a file with more than 100 worksheets (each sheet contains the invoice for one store). I would like to create a macro that would enable me to determine the order in which worksheets would be printed. How to do it?

Idea #1: the printing order would be based on the value in cell L1 that would contain the route number for each store. Stores belonging to the same delivery route will have the same value in L1. So, the macro should first print all sheets with 1 in cell L1, then print all sheets with 2 in cell L1 and so on...

Idea #2: Creating a separate data sheet with the list of all stores and their corresponding route number. Let's say info is contained in range A1:B150, where Column A contains the name of the stores and column B contains the route numbers. The macro then should look at that list to determine the printing order of the subsequent worksheets (the name of the store in column A would be the same as the name of the worksheet corresponding to that store).

Idea #3: sorting my 150 worksheets manually. It does not solve my problem fully, though, because stores do not always belong to the same route. So the manual sorting should be carried out daily and would not save time at all.

View 9 Replies View Related

Changing The Order Of A Date

Mar 22, 2008

I have an entire column with the date reading in this order:
7/4/19

The actual date should be April 19th, 2007, however, Excel is reading it as
July 4th, 2019.

How do I correct it?

View 9 Replies View Related

Custom List Order Of Names

Mar 21, 2008

I Have A List That Is Generated From Another Program Dump Info Into Excell.
This List Has Names In One Colun And Corresponding Values In The Next Column. My Goal: Get The Name And Values To Be Listed In A Specific Order To Be Copied To Another Workbook. Issue: All The Names Do Not Always Get Sent From Original Program. Example:

Person1 Always Needs To Be In Row2
Person 2 Always Needs To Be In Row3
Etc
However Person1 May Not Be On The List Today. In Which Case I Need Row2 Blank

View 2 Replies View Related

Changing Order Of Text Based On Results?

Oct 7, 2013

I've attached a spreadsheet. I want the order of the sentence to change based on the numbers and whether they are positive or negative. Below are more details and the spreadsheet has numbers.

"Total expense for September was 8 higher (lower) than prior year, driven by a higher (lower) claims expense and admin expense"

This might be hard to explain: For the second part (starting from "driven by", I would like the variable that explains more of the positive or negative variance (in the example, claims) to come first.

Here is a different example

Total expense for September was 6 lower than prior year, driven by a lower admin expense (claims is not included because it is higher)

View 8 Replies View Related

Userform - Get Combobx Names In Ascending Order?

May 8, 2014

Userform : how to get combobx names in Ascending order

View 12 Replies View Related

Pull Customer Names Who Placed Order In Jan-Aug But Not Sept

Oct 2, 2013

I have a spreadsheet with data of customer orders. I am looking for a way to pull the customers who have placed an order between January and August, but did NOT place an order in September (in order to reach out to those customers who have stopped ordering).

I can't post attachments for some reason, so this is a description of how the sheet looks.

Column:
A - Delivery Date (MM/DD/YYYY)
B - Month (MM) --> formula created to pull month from column A. For example 2/12/2013 returns "2"
C - First Name
D - Last Name

I need to find a way to create a list of customers, without duplicates, who placed an order previous to Sept, but not in Sept. So, pull unique names from column C and D that have an entry in column B of 1-8, but NOT 9.

View 3 Replies View Related

Names In Alphabetical Order Based On Totals

Sep 17, 2007

Spreadsheet consists of the following:

Worksheet 1
B10 : B49 = Names
AO10 : AO49 = Amount

Worksheet 2
I want it list the Names only from highest to the lowest from worksheet 1. If two Names have the same total then I want it in Alphabetical order towards who will be listed first.

Example:
Worksheet 1
B10 Sam AO10 10
B11 John AO11 14
B12 george AO12 16
B13 Steve AO13 9
B14 Carlos AO14 9

Worksheet 2
george
John
Sam
Carlos
Steve

View 9 Replies View Related

Changing Sort Order - First Text Then Numeric Values

Nov 3, 2011

Currently I have a macro set up that sorts a range.

It sorts numbers first in ascending order and then text comes at the bottom of the sorted range.

Is there any way of reversing this so that text appears first and then numeric values in ascending order below?

View 1 Replies View Related

Formula To Produce Names And $values In Ascending Order

Oct 18, 2012

I would like to find a formula that produces Names and $values in ascending order.

Example :-
Cell a1 =John Cell b1 = $70
a2 = Bill b2 = $100
a3 = Jane b3 = $25
a4 = Frank b4 = $10
a5 = Mary b5 = $60
a6 = George b6 = $30.

ANSWER to be
Frank $10......Lowest price
Jane $25
George $30
Mary $60
John $70
Bill $100.

View 6 Replies View Related

List Names In Alphabetical Order From Multiple Worksheets

Mar 3, 2007

I'm trying to get this formula to work across multiple worksheets. It suppose to list names in alphabetical order. I'm using these define names to get it to work. Also may I have another formula that list unique names in alphabetical order?

Col_A=T(INDIRECT("''"&XWSLST&"'!A"&(2+MOD(S,N))))
N=50
S=ROW(INDIRECT("1:"&(N*ROWS(WSLST))))-1
WSLST=Sheet6!$D$2:$D$5


=IF(ROWS($E$2:E2)<= COUNTIF(Col_A,"?*"),INDEX(Col_A,MATCH(LARGE(COUNTIF(Col_A,">"&Col_A),ROWS($E$2:E2))=S+1,COUNTIF(Col_A,">"&Col_A),0)),"")

View 9 Replies View Related

Keeping Track Of Scores And Automatically Displays Names Of Players In Descending Order?

Feb 7, 2012

I'm fairly new to using excel and have been trying to create a simple spreadsheet that keeps track of scores and automatically displays the names of the players in descending order. Anyway I have gotten to the point of using hookup to match a value and return that players name. But when two players have the same score it will only return the first found value. I sort the number scores using a LARGE function and it works great. Then I use something like this =HLOOKUP(Y2,B27:K28,2,FALSE) to match that value with the players name. How to return the other players name when the scores are the same?

View 7 Replies View Related

Changing Worksheet Names Anywhere Between 50-100

Jan 24, 2008

I would like to change the worksheets names (many, anywhere between 50-100) to a cell (A2) value in each of the worksheets.

View 9 Replies View Related

Changing Tab Names Using VBA Script

Dec 30, 2008

I'm creating a spread sheet which contains 52 tabs (1 for each week). Instead of manually naming each tab, I would like to create a VBA script that automatically renames each tab using the following naming convention, wk end 1-2, wk end 1-9, wk end 1-16, etc.

I'm not familiar with how to write VBA code and would like some assistance in writing the script correctly.

View 9 Replies View Related

Continual Changing Sheet Names

Nov 24, 2008

I want to capture data from another workbook each month where the sheet name that I need the data from changes each month. i.e. 0810, 0811, 0812, 0901. Are possible sheet names. I've tried to build this unsuccessfully into the my -

View 5 Replies View Related

Changing File Names Within Worksheets

Mar 25, 2009

my formula is as follows: =(VLOOKUP(A7,'[Monthly AR Analysis - Feb09.xls]AR - Current'!$A$1:$I$153,8,FALSE)). I will be using this for formula on about 15 different worksheets ... my issue is the file name changes every month and currently I have to go in and do a find and replace, I would like to have one main page where I could change the file name month and it will change all the rest.

ie: Monthly AR Analysis - Feb09.xls next month changes to Monthly AR Analysis - Mar09.xls .... So basically each month I want it to pick up the new file that has been saved with the new name. So what I would want is to be able to have a cell that I could change the Feb09 to Mar09 and then it would do the same to all the worksheets. I attempted to use CONCATENATE to change file name and it worked but will not work within the Vlookup.

View 4 Replies View Related

Names Changing In Pivot Table Macro

Jul 19, 2013

I am running into an error when creating a macro to make a pivot table and sum certain columns. I am fairly certain this is due to the name changing to PivotTable2, 3, 4, etc. each time. Is there a way to make the name stagnent so when a table is created in the macro it doesn't error out the formulas? I have an example below.

Code:

Columns("A:D").Select
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"Data!R1C1:R1048576C4", Version:=xlPivotTableVersion14).CreatePivotTable _
TableDestination:="Pivot!R1C1", TableName:="PivotTable5", DefaultVersion _
:=xlPivotTableVersion14

[Code] .........

View 2 Replies View Related

VBA Macro - VLookup From 2 Workbooks With Changing Names

Feb 17, 2014

I have a user which needs to run a vlookup daily. There is some formatting involved, especially with 2 exported workbooks...

So I wanted to make her a macro to do it. So she exports 2 workbooks where the names change based off the date range she runs the data for.

I was thinking I wanted her to close excel completely, then run them in a specific order and do the vlookups based of Index Numbers.

I can do the entire macro except for the syntax of the vlookup. I think if i write what I need, you guys could put it in proper syntax:

=Vlookup(RC[-10],Workbooks(2).Sheets(1).Range(A:A),1,false)

View 2 Replies View Related

Pivot Table - Changing Field Names

Jun 23, 2014

Using Pivot Table, I added a field to the "Values" field in order to give me a sum of the numbers. The title automatically changes to "Total", I am needing it to show "Total Invoice to OOM Delta". Is there a way to do this? I tried the Active Field option, but that's not working for some reason.

View 9 Replies View Related

Changing File Names In A Windows Directory

Nov 23, 2009

Using VBA, can anyone please advise if it is possible to change the name of a large number of files in a directory. I want to get each file name as a string, truncate the first few characters, then change the name to the new filename, all without opening any of the files whose names are to be changed.

View 9 Replies View Related

Hyperlink Index To Changing Sheets Tab Names

Jan 11, 2008

I have a long list of tabs listing "projects" which have changing names - on the first sheet, I want to have the table of contents automatically update and link to each tab - I want the user to only have to change the tab name to have the table of contents and link update -

View 5 Replies View Related

Generating A Repeating List Of Names From An Ever Changing Roster.

May 2, 2006

I have a workbook where Sheet 1 Col A is a list of dates. Sheet 2 Col A is a relatively short list of constantly changing names. I need to put this list of names in a repeating fashion in Sheet 1 Col B. Ideally I would like for Sheet 1 to regenerate Col B each time the roster list is changed.

View 5 Replies View Related

Sheet Indirection. Refer To Sheets With Changing Names

Feb 25, 2008

I've been referencing sheets in my code directly with things like

Sheet1. Range(NamedRange)

however in recreating a new workbook (to reduce bloat), the sheet-numbering has changed... to avoid having to mess around adjusting things again, I was wondering if it's possible to do some sort of indirection... something similar to

#define SHEET_SC_CONFIG Sheet1
#define SHEET_CUSTOMER Sheet2

'and then use these throughout the code....
SHEET_SC_CONFIG.Range(NamedRange)

(cannot reference by sheet name, as end user may change these)

View 6 Replies View Related

VBA Select Multiple Sheets Of Varied/Changing Sheet Names

May 18, 2006

How can I select sheets in a workbook based on the premise that the sheetname does not have the letter "Q" in it? New to forum, so apologies if format is not kosher.
I have a group of 50+ workbooks which are all set up in the following format:

-Contains 30+ sheets.
-Sheet names are varied, but follow a pattern. I try to keep the sheet names consistant on all workbooks so that it is easier to reference, but other users make this impossible.
-However, I managed to keep two things consistant: There are two categories of sheets. In one group all sheetnames have a "Q" in them and in the other group all sheetnames DON'T have a "Q" in them.

Here is my problem: I need to run a macro to perform retative tasks on the GROUP OF SHEETS WITHOUT A "Q". To begin the macro I need to select these sheets and copy them to a new workbook, but since the actual sheetnames are varied, I am having trouble coming up with a flexible way of selecting sheets. The closest I have come is using a IF ... LIKE ... THEN statement, but I can only get it to work to select the sheets with a "Q" in the name and not the opposite.

View 2 Replies View Related

Changing Values Of X-axis, And Descending Order Axis(x-axis)

Feb 8, 2009

Two questions:

1) How do make values on x-axis as words? E.g. apples, oranges, etc.

2) Is it possible to have the numbers on x-axis in descending order? If I can figure out 1), I can do this as well, but it would be nice to know if it is possible to have the numbers on x-axis in descending order.

View 8 Replies View Related

Worksheets, One With "supplier Names", "order Numbers" And "delay In Days" As Columns

Jul 19, 2007

I have two worksheets, one with "supplier names", "order numbers" and "delay in days" as columns. The other one with "supplier names" and "average delays" as columns.

It is the column "average delays" that I have issues with, I need Excel to search the "supplier names" column in the "delays" sheet and identify every specific supplier name, connect the delay in days for that order and calculate the average delay in the right cell of the column "average delays" in the sheet "delay statistics".

I have tried the help files and to search this forum but I have found nothing. I have also with my knowledge tried a few different ways using the IF function but nothing so far.

This is something I started doing but it is of course far away from any truth.

=IF(;Delays!B1:B200="Greber")..............

This is the "delays" sheet where I want to find my info. Nothing in the delay column stands for "no delay"...Kinda obvious but you know... So even the "nothing" needs to be included in the calculation..

View 9 Replies View Related

Re-Order Columns Based On Column Order Of Another Worksheet

Mar 1, 2008

I need a way to re-order an excel worksheets columns based on another worksheet.

Data is extracted from a database into excel however users can configure the columns in the initial system. to how they like This causes problems when the data is copied into an excel spreadsheet I have created as the data copied will not be in the same column order as is required.

How can i reorder the columns without physically having to cut and paste the columns to match?

I have attached a sample spreadsheet.

You will see on the spreadsheet that 'fixed columns' is the order that i require the data however 'variable columns' is not in the same order.

View 3 Replies View Related

Create Dropdown That Will List All Names Starting With Initial Letter Of Names?

Jan 13, 2014

I have a long customer listing, names 5 to 36 characters and several with their location in the name as well as a few common duplicate names. I am trying to produce sheet where the customers name once selected opens in the customers spreadsheet and data can be added/amended for sales etc.The lists are not in alphabetical order as when created a customer number is automatically allocated. My aim is just to type in the first letter of the name and the dropdown appears the customer is selected and their card appears. I have tried data validation, lookup, vlookup, Dropdown and Match/find. they only return the first record found and no sign of any others. Find returned all instances of the letter appearing in every name.

View 9 Replies View Related

Can Create Data Validation List Of Names Created In Name Box Or Sheet Tab Names

May 7, 2012

Can I create data validation list of the names created in the name box or of the sheet tab names?

View 5 Replies View Related

Excel 2010 :: VBA - Hide Sheets Using Code Names Not Sheet Names

Oct 15, 2013

Code:

Sheets(Array("Sheet 1", "Sheet 2")).Visible = False

How do I convert the above to using Sheet Codes Names, Sheet1 and Sheet2?

Want to ensure my code will work if the user changes the sheet name.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved