I have a spreadsheet wherein the defined data input cells are formatted using styles, i.e. data input style. I would like to know how to select all cells formatted with that style within a spreadsheet (whether worksheets are visible, hidden or very hidden) and delete the contents of those cells while still keeping the cell style.
View 9 RepliesIs there any way to modify the 1st style under the Light category? I like it because it's the most simple but it won't allow me to Modify or Duplicate. Is there a work around to duplicating/copying it? I've tried manually creating a new style but I can't get it to get the lines fills correctly.
View 2 Replies View RelatedIs there anyway to select all cells with a particular style in a worksheet? Like a "Go To" (F5) or Find Styles equivalent?
View 2 Replies View RelatedI want to know if there is any formula to match two numbers which have same digits but are in different style. I have attached a spreadsheet with numbers in column A and Column B. Both columns have the same number just the style is different, is it possible that i get a match based on the digits match and then return the output as correct or wrong?
If all digits match from column A with column B it should show as correct else wrong.
How can I concatenate 2 cells address style? I'm trying to merge 2 cells into one, so that one is under the other in the same cell.
View 5 Replies View RelatedIs there a macro that can select all cells with a certain style and then clear the values. The idea is that a big document has cells that are formatted as "entry-fields" and others that are not. I want to be able to select all of them with a macro (they are everywhere) and clear them of their contents (hence a reset button for this style).
I've tried something with If Target.Style = "entry-field" Then but i don't know how to search for them and have them in Target or a variable in the first place.
I recorded this and I was wondering if there was a more simple way to add a thin style border to my cells?
'Insert BorderUnion(Range("K6", Cells(LastRow, "K")),
Range("B6", Cells(LastRow, "B"))).Select
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
[Code] ......
Trying to use Excel Data List to create a database style report. IE. Originally blank sheet, which is only populated by data containing data matching "filters" input into cells ( say A1 & A2 )
I.e. A1 = Delivery week to be filtered by, and B1 Manufacturer Name
So if I type week "1" into A1 & Manufacturer "Microsoft" into A2, it will show a table only containing data Microsoft, Week 1, and associated data for those lines across the screen.
Week 1
Microsoft
PO number : Date Ordered: Address 1, 2 3 etc....
0011 01/01/13 Somewhere
0015 02/01/13 Anywhere
0213 05/01/13 Nowhere
I know this is much easier with a database, however my manager insists a database cannot be used, and it must be in a spreadsheet format !
I would like to run a macro that would check if the date in the first cell of row is in the past.
If yes, then it would clear contents of cell in B,C,F,I,L of the same row (PLAN + SHIFTS). Or even better it would set them to 0 (zero).
Then it would hide the entire row. Is this even possible?
Please see the example: Excel.JPG
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
View 14 Replies View RelatedMacro to clear cells with numbers but no cells with formulas with in this macro:
Dim i As Long
i = Range("E3")
If i > 0 Then
' Copy range
Range(Cells(6, 10 + i), Cells(500, 17)).Copy
Range(Cells(6, 10), Cells(500, 17)).Select
' Paste special
ActiveSheet.PasteSpecial Format:=2, Link:=1, _
DisplayAsIcon:=False, IconFileName:=False
' Clear i columns on the right
Range(Cells(6, 18 - i), Cells(500, 17)).ClearContents
End If
End Sub
The range is where the cells with numbers need to be cleared but not the ones with formulas.
I have written this code to clear the contents of certain cells, lock the content of others and protect the sheet again it works on sheet1 but not on sheet 7. This is suppose to happen when the Print button on my sheet is clicked.
View 4 Replies View Relatedhow do i create a formula or macro that will: Clear the contents of Cell C1 If Both Cell A1 And B1 Are Filled. I will need to check all the cells in column A,B and C.
View 2 Replies View RelatedI am getting a #VALUE! error in one of my cells. I know it is because my worksheet is missing information to complete the formula. The information will be inputted periodically in the worksheet (lets call it worksheet number one). But, I have the results of cells in worksheet one that are tied to worksheet number two. Worksheet number two is getting the #VALUE! also until worksheet number one is completed (periodically).
But, in worksheet number two, I have an auto sum that adds up the results from worksheet one so I am getting the same #VALUE! error on the auto sum because only a few worksheet from worksheet one are complete. Is there anyway to clear the #VALUE! and get a number in the auto sum even if only a few worksheets from worksheet number one are inputted?
I need to clear all cells in a column that have a particular value. The value is sometimes a constant like "0" (zero) and sometimes is a value based on a formula. Is there a VBA code that will allow me to select those cells in column matching a particular value and clear them?
View 9 Replies View RelatedI want the function of clear contents to work based on the value of B4. If I run the code with clear content part excel crushes.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("B4") = "Basic" Then ''*** B4 is adropdown ***''
ActiveSheet.Unprotect
'Range("B10,F10,H10").ClearContents ''*** if I run this part the excel crushes ***'''
Range("B10,F10,H10").Locked = True
[Code] .....
I have a spreadsheet with a large table of data (values only no formulas). Whoever programmed it, they decided that cells with irrelevant entries should display three dots, i.e. "...". Problem is now need to clear these cells (so they are truly blank) but some of them have been auto-corrected in to ellipses and some have not. I wrote the following code:
[Code] .....
This is fine for the three dots that are just three dots, but for the ones that were auto-corrected to ellipses it doesn't work. How do I amend the code so that it clears the cells that are three dots and the ellipses too?
I have a button, and I need a Macro that will cause it to clear all unprotected cells. I think I can figure out how to get it to clear an individual cell, and I suppose I could enter every cell I want cleared individually...but that might take awhile.
Is there a way to set up a Macro that will delete the contents of every unprotected cell? I guess I haven't tried it yet - if I protect the cells, will it not delete those? Also, there is a small image - I don't want that deleted either.
I have a spreadsheet that has merged cells on that is typed into.
I have a Macro that pulls the information into another sheet and then it tries to clear the cells for the next person to fill in. The issue I am having is that i cant clear the merged cell. I have tried the following code
Code:
Sheets("Coach").Select
Cells(18, 2) = ""
Range(Cells(18, 2), Cells(26, 11)).ClearContents
Sheets("Coach").Cells(18, 2).ClearContents
I have data in columns a,b,c and d from row 1 to about 200 right now. Every week another 9 rows are added. I wanted to create a macro that will delete the last 9 entries in each column.
The best script to clear all non-blank cells, in my case from Cells(7,1) forward. I currently use this:
.Range(Cells(7, Columns.Count), Cells(Rows.Count, 1)).Value = ""
Will this scipt take a lot of memory to execute? Is there any other method?
if I had text in column A, I would like to clear all the cells to the right and leave the text in column A.
Also, if I had text in column A and B, I would like to clear the cells to the right.
Am looking for routine that can be used to delete the contents of cells from multiple, non-contiguous cells throughout a single worksheet. I would like to place a "button" or some form of toggle-switch on the worksheet that will clear all entries at once. I see a thread "Macro Deleting Wrong Cells" that references a VBA sub-routine called "DelCells". I happen to be running Excel 2007 and am still adjusting to the new menu "structure" :-)
View 5 Replies View RelatedGotta question about destroying the contense of a worksheet. If for instance I got a macro which uses a different source everytime I run it, and this macro gives a result in a result worksheet. How can I possibly delete the contense of the result worksheet automatically before the execution starts? What I mean is: without selecting all the cells and pressing delete or either using a for loop to go through all the worksheet cells. Is there any function which clears the contense of a worksheet? (without deleting the worksheet itself)
View 2 Replies View RelatedI have the following code in a Excel 2003 spreadsheet with hope that I can clear contents of unlocked cells in one excel file from the code stored in another Excel file.
Sub CLEARSJCCOUNT()
'
' CLEARSJCCOUNT Macro
' Macro recorded 02/21/2008 by Steve Keene
'
Windows("copyAUTOCOUNTSHT.xls").Activate
I get the Subscript Out of Range error window when it hits the first line of code.
I've reviewed this via searching for other posts, but none seem to solve the problem directly.
In Column C, I have a variable range (usually like, C5:C100000) that has data validation in it. However, only about 10% of the cells have a value from that data validation list in them (which is what I want). I'd like to write a macro that only cleared out the cells with no value in them, so that they no longer had any data validation in them. Is this possible?
View 2 Replies View RelatedI have several cells on a worksheet which contain data validation and force the user to select from a list, and several other cells with free user input. I want to use a macro to clear all data, and return the cells containing data validation to blank. (I have a blnak row at the top of all my lists, so there is a selection for "blank".)
I have no problem clearing the cells requiring user input, but my recorded macro would not select the cells with validation and return them to blank.
The first cell containing validation that I need to clear is M39. I have my code listed below for clearing the other cells. If I could get a clue on how to return M39 to blank, I could figure out the rest of the cells.
I have a dropdown list in the range E17:E91 containing a list, and two of the values in the list are "DI" and "LTC". What I need to happen is if either of these are selected, the corresponding cell in column F needs to have it's contents cleared. Ex. if in E17 the value is ever either DI or LTC, cell F17 gets contents cleared. if column E contains ANYTHING ELSE, nothing happens. That's all, I've taken care of conditional formatting and data validation already. So even if data is pasted in the worksheet into column E it needs to recognize that and always act in real time.
View 14 Replies View RelatedMy Workbook with a macro to clear ONLY the highlighted Cells.
The Highlighted Cells can be found on the sheet "Line 5"
In a workbook with about 400 sheets I have this code, to clear any light blue cells for a button:
View 5 Replies View Related