The best script to clear all non-blank cells, in my case from Cells(7,1) forward. I currently use this:
.Range(Cells(7, Columns.Count), Cells(Rows.Count, 1)).Value = ""
Will this scipt take a lot of memory to execute? Is there any other method?
Is there a way to delete or clear a row on exit if no end date has gone into it. i.e. if the user clicks on the X button in the top right hand corner.
Every time the user clicks on start the date goes into the next empty row, if finish is clicked then the end date will go into the cell next to it. See example below. Here the user has started and ended correctly
column
AB
StartEnd
24/10/09 24/10/09
24/10/09 24/10/09
In the example below the user has forgotten to click on the finish button when they first clicked on start, they exited excel instead and no end date was inputted. When the user clicked on start again the start date went to the row below, however as there was no end date the last time, this time when they clicked on end button, then end date went to the first BLANK CELL
column
AB
StartEnd
24/10/09 24/10/09
24/10/09
I would want the delete row or clear row option, which ever would work best, to happen if the user clicked on the X in top right and corner or Exited excel via File.
Ideally I would like the row cleared and not deleted, I have read Clare Watts thread and we both seems to be having a similar problem, I have used some of the examples from her thread but non seem to work. So I now wish to go with a delete or clear row option on exit, if possible.
The row changes every time. The column for deleting or clearing would be A to AB. The end date goes in to Column B
So if the user clicked on start but did not click on the Finish Button then the last row with no end date would be deleted or cleared on exit from column A to AB
column
AB
StartEnd
24/10/09 24/10/09
24/10/09(This is deleted or Cleared of exit via X top right hand corner)
Ok so my named range looks like this:
[Code]....
However, I want to ignore the "" cells and the truly blank cells... However, I think all of them will have "" since I have this formula in all of the ones I'm putting in the range:
[Code]....
How do I go about getting these results into a named range so I can use it on validation since validation only seems to ignore truly blank cells and not the "" ones.
I would like to run a macro that would check if the date in the first cell of row is in the past.
If yes, then it would clear contents of cell in B,C,F,I,L of the same row (PLAN + SHIFTS). Or even better it would set them to 0 (zero).
Then it would hide the entire row. Is this even possible?
Please see the example: Excel.JPG
I am looking for a code that will clear all of my unlocked cell in sheet 1. That is not a problem but since many of the cells are merged I know it keeps throwing me an error saying cannot change contents of merged cells or something like that. Does anyone know how to get around this without unmerging the cells. I saw a code to unmerge all of the cells on a sheet but I really don't want to do this as I already have worked around most of my problems with the merged cells.
View 14 Replies View RelatedMacro to clear cells with numbers but no cells with formulas with in this macro:
Dim i As Long
i = Range("E3")
If i > 0 Then
' Copy range
Range(Cells(6, 10 + i), Cells(500, 17)).Copy
Range(Cells(6, 10), Cells(500, 17)).Select
' Paste special
ActiveSheet.PasteSpecial Format:=2, Link:=1, _
DisplayAsIcon:=False, IconFileName:=False
' Clear i columns on the right
Range(Cells(6, 18 - i), Cells(500, 17)).ClearContents
End If
End Sub
The range is where the cells with numbers need to be cleared but not the ones with formulas.
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI have written this code to clear the contents of certain cells, lock the content of others and protect the sheet again it works on sheet1 but not on sheet 7. This is suppose to happen when the Print button on my sheet is clicked.
View 4 Replies View Relatedhow do i create a formula or macro that will: Clear the contents of Cell C1 If Both Cell A1 And B1 Are Filled. I will need to check all the cells in column A,B and C.
View 2 Replies View RelatedI can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have sporadic cell values in a column. I will be describing the lamen logic I use to fill in these blanks manually. Find the first nonblank cell in the column, then look for the next nonblank cell in the column. I count the number of blank cells in between. If even # of blank cells, then I give the first half of the blanks the value of the first nonblank cell and the second half of the blank cells the value of the next nonblanck. If odd # of blank cells, then I do the same with the exception that the odd cell that falls in the middle will be randomly designated the value of the either first or second nonblank cell.
View 4 Replies View RelatedI can count the blank cells withiin a range using
=COUNTBLANK(C6:AD2506)
But I dont want it to count the cells if the entire row, within that cell, i.e. C6:AD6, is blank.
It should only count the blank cells within a row if there has been some data entered on that row..provided it has been entered within the specified range.
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
Here's what I'm attempting to do: For each column, X,Y, Z, I am attempting
to count nonblanks. However, the data was imported from Access and Oracle,
and Excel treats what appear to be blank cells as nonblanks. I've tested
this theory by highlighting a couple of "blank" cells and deleting them, and
my count changes. So, can I get Excel to put a value into my "blank" cells,
so then I could filter it out, or create a formula that would only count
dates in my columns (which is what I'm after).
This is what I'm looking at:
A B C
1 2/4/2006 2/6/2006 ("blank")
2 ("blank") 12/13/2005 1/7/2006
3 2/20/2006 1/15/2006 ("blank")
In each column if I use a COUNTA I'll get a total of 3, instead of 2 for A,
3 for B and 1 for C.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
I am getting a #VALUE! error in one of my cells. I know it is because my worksheet is missing information to complete the formula. The information will be inputted periodically in the worksheet (lets call it worksheet number one). But, I have the results of cells in worksheet one that are tied to worksheet number two. Worksheet number two is getting the #VALUE! also until worksheet number one is completed (periodically).
But, in worksheet number two, I have an auto sum that adds up the results from worksheet one so I am getting the same #VALUE! error on the auto sum because only a few worksheet from worksheet one are complete. Is there anyway to clear the #VALUE! and get a number in the auto sum even if only a few worksheets from worksheet number one are inputted?
I need to clear all cells in a column that have a particular value. The value is sometimes a constant like "0" (zero) and sometimes is a value based on a formula. Is there a VBA code that will allow me to select those cells in column matching a particular value and clear them?
View 9 Replies View RelatedThe formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
I need to clear the contents of the cell in Row "A", if the cell in Row "I" is blank.
The issue, is there are roughly 1200 excel documents in a folder and subfolders. That is a painful amount of opening workbooks, sort ascending and deleting. Not on my top 10 list of things to do.
If someone could create a code to do this, and loop it through a folder (I can move all the files to a single folder manually, not an issue)
I want the function of clear contents to work based on the value of B4. If I run the code with clear content part excel crushes.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("B4") = "Basic" Then ''*** B4 is adropdown ***''
ActiveSheet.Unprotect
'Range("B10,F10,H10").ClearContents ''*** if I run this part the excel crushes ***'''
Range("B10,F10,H10").Locked = True
[Code] .....
I have a spreadsheet with a large table of data (values only no formulas). Whoever programmed it, they decided that cells with irrelevant entries should display three dots, i.e. "...". Problem is now need to clear these cells (so they are truly blank) but some of them have been auto-corrected in to ellipses and some have not. I wrote the following code:
[Code] .....
This is fine for the three dots that are just three dots, but for the ones that were auto-corrected to ellipses it doesn't work. How do I amend the code so that it clears the cells that are three dots and the ellipses too?
I have a button, and I need a Macro that will cause it to clear all unprotected cells. I think I can figure out how to get it to clear an individual cell, and I suppose I could enter every cell I want cleared individually...but that might take awhile.
Is there a way to set up a Macro that will delete the contents of every unprotected cell? I guess I haven't tried it yet - if I protect the cells, will it not delete those? Also, there is a small image - I don't want that deleted either.
I have a spreadsheet that has merged cells on that is typed into.
I have a Macro that pulls the information into another sheet and then it tries to clear the cells for the next person to fill in. The issue I am having is that i cant clear the merged cell. I have tried the following code
Code:
Sheets("Coach").Select
Cells(18, 2) = ""
Range(Cells(18, 2), Cells(26, 11)).ClearContents
Sheets("Coach").Cells(18, 2).ClearContents
I have data in columns a,b,c and d from row 1 to about 200 right now. Every week another 9 rows are added. I wanted to create a macro that will delete the last 9 entries in each column.
if I had text in column A, I would like to clear all the cells to the right and leave the text in column A.
Also, if I had text in column A and B, I would like to clear the cells to the right.
I have a spreadsheet wherein the defined data input cells are formatted using styles, i.e. data input style. I would like to know how to select all cells formatted with that style within a spreadsheet (whether worksheets are visible, hidden or very hidden) and delete the contents of those cells while still keeping the cell style.
View 9 Replies View RelatedAm looking for routine that can be used to delete the contents of cells from multiple, non-contiguous cells throughout a single worksheet. I would like to place a "button" or some form of toggle-switch on the worksheet that will clear all entries at once. I see a thread "Macro Deleting Wrong Cells" that references a VBA sub-routine called "DelCells". I happen to be running Excel 2007 and am still adjusting to the new menu "structure" :-)
View 5 Replies View RelatedGotta question about destroying the contense of a worksheet. If for instance I got a macro which uses a different source everytime I run it, and this macro gives a result in a result worksheet. How can I possibly delete the contense of the result worksheet automatically before the execution starts? What I mean is: without selecting all the cells and pressing delete or either using a for loop to go through all the worksheet cells. Is there any function which clears the contense of a worksheet? (without deleting the worksheet itself)
View 2 Replies View RelatedI have the following code in a Excel 2003 spreadsheet with hope that I can clear contents of unlocked cells in one excel file from the code stored in another Excel file.
Sub CLEARSJCCOUNT()
'
' CLEARSJCCOUNT Macro
' Macro recorded 02/21/2008 by Steve Keene
'
Windows("copyAUTOCOUNTSHT.xls").Activate
I get the Subscript Out of Range error window when it hits the first line of code.
I've reviewed this via searching for other posts, but none seem to solve the problem directly.
