is it possible to refer to ranges by using index numbers?? I am looking for something like: (which I tried but does not work..)
Worksheets("Sheet1").Ranges("Cells(counter,1):Cells(counter+10,10)").ClearContents
I need a simple VB Code to clear the cell :
K106 = BI210:BU269
Need to clear the range BI210:BU269
if K106 = BI271:BU341 then need to clear range BI271:BU341
why the first version below works but the second doesn't
1st
ThisWorkbook.Worksheets("GBP%"). Range(Cells(8, c), Cells(z, c)).ClearContents
2nd
Worksheets("GBP%").Range(Cells(8, c), Cells(z, c)).ClearContents
c = 16 (uses a for statement to go through columns 16 to 111)
z = in this case 24, but is dynamic depending on number of files in a list
Currently using Windows 2000 with office 2000
is it possible to clear the value in a range variable?
For example say:
Set A = Range("B4")
Is there a way to clear the value of that range, in other words make it blank again? And unfortuanlly i can't just make it equal to another range i need it to be blank.
I have a range variable named data I want to clear all the data in the 3rd column in the range variable I know how to reference a single location in the range variable but not a whole column. see example code below
[Code] .....
I want to select and clear a part of a sheet.
here is what I have.
Sub clear_data()
sheets("sheet1").select
lr = activesheet.usedrange.rows.count
Here is where I get lost in translation (syntax).
I want to select starting at Bcolumn through bycolumn but the row be set with the LR from above, since the rows always change.
I could write B2:by2000, but i want to use the LR variable to define the number of rows i have.
In my macro, NextRow is defined as the first empty row in a set of data (NextRow = Range("A1000").End(xlUp).Row + 1). How would I clear the contents of Columns A:H in NextRow in VBA, keeping in mind that NextRow is always different for each worksheet I'm working with?
View 2 Replies View RelatedI need to select a variable number of cells on a line. I know Range("A2:c2") will do exactly what I need EXCEPT i need to use variables to do it. Is this possible, and if so how.
View 5 Replies View RelatedI care about is the line starting wks4.Cells(Di, 2) = I am trying to sum data from a variable length column in worksheet 3 and place the result in column 4 However, when I hit enter after entering the formula into =SUM() I get
Compile Error:
Expected: list separator or )
[code]
Sub Macro1()
Dim wks3 As Worksheet Dim wks4 As Worksheet
Set wks3 = Worksheets("Sheet3")
[Code].....
I am working with a file where I have to clear all the rows where the numbers match. Lets say if there is a row in which /in the amount column/ there is a number: 53 and have another row where /in the amount column/ the number is -53 I can match these two rows and put them to a new sheet. So what I would like to have is something which sorts out all the rows in which the amounts can be matched out. Like 53 and -53, 23587 and -23587, 98 and -98. Is it possible to have something like this? Sorry for the language..
I found code on this site after searching a long time that has worked well in a larger macro I'm writing for use in Excel 2003 usage. However, I'm stumped on how to achieve the following on the attached sample: find and remove the number in A2 from the list in E2 then count the individual numbers seperated by commas in E2 and post the results in G2 Repeat the same sequence for C2, D2 and F2
View 8 Replies View RelatedSay you define a public range variable called Inputworksheet and you set it to refer to the worksheet called Inputworksheet. You have a separate string variable with the value Inputworksheet. How do you get this string variable value to call/control the range variable Inputworksheet?
I am getting an excel worksheet value from a lookup function that corresponds to the name of a VBA range variable. Once I have this worksheet value, I would like to use the range variable that has the same name as the worksheet value.
I am trying to autofill dynamic ranges that have column variables (d) and row variables (x)... I am having a hard time with the syntax on this
View 9 Replies View RelatedI have a table on a worksheet and have for quite some time used a very successful macro UsedRangeClear. I found here on the forum. Anyway the macro still works on all tables on all other sheets except this one. This is the reason, somehow someone, maybe even me, copied something down or formated down to the 1,048,152th row of the worksheet. My workbook has grown from 5000 kb to 11,000 kb.
I have tried to highlight and deleted the rows, highlight and clear contents and the following macros:
Sub UsedRangeClear()
On Error Resume Next
ActiveSheet.Unprotect Password:="myfadra"
Range("A:A").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
ActiveSheet.UsedRange
ActiveSheet.Protect Password:="myfadra"
End Sub
Sub ReSetTable_UsedRange()
'For ICFMR
Dim LR As Long
LR = Range("A" & Rows.Count).End(xlUp).row
On Error Resume Next
ActiveSheet.Unprotect Password:="myfadra"
Application.ScreenUpdating = False
Range("A:A").SpecialCells(xlCellTypeBlanks).EntireRow.Delete
ActiveSheet.ListObjects("Table7").Resize Range("A1:T" & LR)
ActiveSheet.Protect Password:="myfadra"
Application.ScreenUpdating = True
End Sub
Each option freezes Excel. I am sure there is something easy I am just missing. Soooo, Please offer any suggestions you can think of.
A Loyal Mr. Excel Follower
Alecia
I'm wrinting a macro to copy specific data from a table. To do that I'm using a Autofilter and a list of criteria. The macros works fine for existent data, I'm mean, when the result of the filter is not null, but when the filter doesn't find a result, instead of clearing the filter range, it keeps the last valid. The result is a colapse and freeze the Excel. I'd like to know how can I reset or clear the filter range?
The code I'm using is:
Sub Filter_01()
'Definições preliminares
Dim rng As Range
Dim rng2 As Range
Dim ARLE
Dim filter_valid, filter_invalid As Variant
filter_valid = Array()
filter_invalid = Array()
'Criação do Arquivo de Destino
Caminho = "D:Documents and Settingscjcs.ABMeus documentosAutomaSIPPPlanilhas"
Nome_Arquivo = "Produtos_Tanques.xls"
Nome_Completo = Caminho & "" & Nome_Arquivo ...
I have a macro to clear all contents for a sheet in a workbook. The problem is that every file has over 20 sheets of data. Is there a way I can code a for statement to clear all sheets in this one workbook? Is it possible to make a for statement for multiple workbooks with several sheets?
Range("A11:Z11").Select
Range(Selection, Selection.End(xlDown)).Select
Application.CutCopyMode = False
Selection.ClearContents
Selection.Interior.ColorIndex = xlNone
Selection.Borders(xlDiagonalDown).LineStyle = xlNone
Selection.Borders(xlDiagonalUp).LineStyle = xlNone
Selection.Borders(xlEdgeLeft).LineStyle = xlNone
Selection.Borders(xlEdgeTop).LineStyle = xlNone
Selection.Borders(xlEdgeBottom).LineStyle = xlNone
Selection.Borders(xlEdgeRight).LineStyle = xlNone
Selection.Borders(xlInsideVertical).LineStyle = xlNone
Selection.Borders(xlInsideHorizontal).LineStyle = xlNone
Selection.ClearComments
I have used the VBA and it works to select all data but I have an issue when there is no data to select beneath the column header. I am running this on multiple worksheets which vary with data week to week.
Sheets("sheet1"). Range("A6:G" & Range("G" & Rows.Count).End(xlUp).Row).Offset(0, 0).Select selection.ClearContents
How can I run this and not have it delete the column header when there is no data? Is there a way to change the formula so that it selects all cell columns of data without defining it?
I have
colpaste1 =Range("D2:D2")=BA
colpaste3 =Range("D4:D4")=BC
If Cell D2 = BA and D4= BC, i need VB Code to clear all contents in column BA to BC.
Note: BA and BC are the columns.
This seems to take much longer than I would have expected. Is there anything I can do to speed it up, or is this just something to live with?
View 13 Replies View RelatedI'm using a macro to copy the results of a formula and paste the values only on another sheet. The result includes lots of "blank" rows. I have another macro to get rid of the empty rows and move the information up.
It's not working because the "blank" rows aren't empty. Even though I paste values only, experimentation shows that the cells that appear blank return a false to the ISBLANK test with a length of 0.
So now I think I need a macro to run after the pastespecial command to look for cells within a range with a length of zero and delete the contents of those cells, but leave alone anything with a length of >0.
I am brand new to the idea of using VBA, but I have successfully cobbled together some stuff and can usually modify things to work.
It seems I need to maybe use some sort of IF statement along with a LEN and ClearContents. I don't want to delete the blank cells, just make them truly empty so that all of my actual data stays where it should, and my delete empty rows macro works correctly.
I did a search and see some info on clearing contents of columns or rows, or clearing contents based on the content of other columns or rows, but I'm unsure of how to tell it to search each cell within a range and clear the contents of 0-length cells to make them truly empty.
I am trying to create a marco that clears the columns of a named range if the sum of the cells in the range is zero.
View 3 Replies View RelatedI need a macro that will clear the contents of all cells shaded white in range c1:c20.
Clear the contents, leave the cells shaded white.
I am trying to write a macro in excel to clear all cells within a range that are non numeric. I seem to be going round in circles trying to find out how to do this.
I assume I have to use the IsNotNumeric(Target) argument but I can't find how to specify the target within a range.
I want to clear the range A10:IV65536 or all the cells containning numbers under the row A10.
Right now it takes for ever to clear it mannually because excel recalculates everything... i have over 100 000 data and id like to find a way to delete them quickly.
Is there a way to clear a range without excel recalculating everything???
If not the best way i think would be to clear the last columns first all the way to the first columns.
I'm trying clear the contents of a column range when the cell above this column range is empty. I know how to do this for one cell, but I would like it to work for a rangefrom R15:BB15.
If IsEmpty(Range("r15")) Then
Range("r16:r35").Select
Selection.ClearContents
End If
End Sub
i need a macro that will select 0's in columns h-j.
View 7 Replies View RelatedI am filtering column S in a sheet to show all rows with a date after the end of the previous month - i.e. >= 01/01/07. What i want to do is clear the contents of those visible cells in column S. I tried the code below (got it on this site) but it works its way up from the bottom of the sheet until it finds the first visible row and then clears the contents of column S in each row above it, whether it is visible or not.
Sheets("Planning").Select
With Range("e2:C2")
.AutoFilter field:=5, Criteria1:="<=" & Sheets("Filtered Statistics").Range("c3")
.AutoFilter field:=19, Criteria1:=">=" & Sheets("Filtered Statistics").Range("d3")
For i = Range("s65536").End(xlUp).Row To 3 Step -1
If InStr(1, ">=" & Sheets("Filtered Statistics").Range("d3"), Cells(i, 19).Value) = 0 Then
Cells(i, 19).ClearContents
End If
Next i
.AutoFilter field:=19
End With
I found a way to import some data from some csv files, and it works well for me. I don't want to keep the option to refresh the data. I can go into each tab created from each import and and uncheck the box Data>Import External Data>Data Range Properties>"save query definition" that removes it for me. Is there a way to do that with code. It doesn't work with the macro recorder.
Sub ImportOnline()
On Error Resume Next
Dim DayFile As String
DayFile = InputBox("Enter Date of File (MMDDYY)")
Sheets.Add
ActiveSheet.Select
ActiveSheet.Name = "B-" & DayFile
Application.ScreenUpdating = False
With ActiveSheet.QueryTables.Add(Connection:= _
"TEXT;C:My DocumentsB-" & DayFile & ".txt", _
Destination:=Range("A1"))
.Name = DayFile
.FieldNames = True
.RowNumbers = False
.FillAdjacentFormulas = False
.PreserveFormatting = True
.RefreshOnFileOpen = False................
I have a dynamically named range the contents of which I want to clear. However, I also want to clear the cell contents in the next column beside the range. So if my dynamically named range is A20:B40 can I clear the contents of A20:C40 without changing the initially named range. Background: The data I have is the result of an advanced filter. The range is named for printing purposes without the final column.
If I then change one of the raw data I want to run the filter again. To do this I need to clear the first filter.
Range("AIT_Change_Management").ClearContents
I am trying to code a command button to clear a range of cells if any of them contain a numeric value. For example. If any cells of cell range A1:C10 contain a numeric value then they would be cleared. Not all the cells in the range but only thouse contaiing numeric values. I have tried various methods with not-so-good results.
View 9 Replies View Related