Clear Cell In Variable Dynamic Range

Feb 21, 2008

In my macro, NextRow is defined as the first empty row in a set of data (NextRow = Range("A1000").End(xlUp).Row + 1). How would I clear the contents of Columns A:H in NextRow in VBA, keeping in mind that NextRow is always different for each worksheet I'm working with?

View 2 Replies


Clear Content Of Conditional Dynamic Range?

Aug 3, 2014

I am currently working on writing a macro that clears all rows in which the cell in column F doesn't say "Sale", "Purchase", or "Tax Code Description", however, I keep receiving an error that says "Wrong number of arguments or invalid property assignment".

[Code] .....

Also, I originally was deleting the rows, but I have formula's pulling from this tab and need them to not lose their reference after the macro executes.

View 2 Replies View Related

Clear Range With Variable?

May 8, 2014

I need a simple VB Code to clear the cell :

K106 = BI210:BU269

Need to clear the range BI210:BU269

if K106 = BI271:BU341 then need to clear range BI271:BU341

View 2 Replies View Related

Clear Variable Range

Aug 31, 2007

why the first version below works but the second doesn't


ThisWorkbook.Worksheets("GBP%"). Range(Cells(8, c), Cells(z, c)).ClearContents


Worksheets("GBP%").Range(Cells(8, c), Cells(z, c)).ClearContents

c = 16 (uses a for statement to go through columns 16 to 111)
z = in this case 24, but is dynamic depending on number of files in a list

Currently using Windows 2000 with office 2000

View 6 Replies View Related

Clear Set Range Variable

Jun 18, 2008

is it possible to clear the value in a range variable?

For example say:

Set A = Range("B4")

Is there a way to clear the value of that range, in other words make it blank again? And unfortuanlly i can't just make it equal to another range i need it to be blank.

View 6 Replies View Related

Clear Range Using Variable Row Numbers

May 5, 2008

is it possible to refer to ranges by using index numbers?? I am looking for something like: (which I tried but does not work..)


View 4 Replies View Related

Clear Contents Of Column In Range Variable?

Feb 11, 2014

I have a range variable named data I want to clear all the data in the 3rd column in the range variable I know how to reference a single location in the range variable but not a whole column. see example code below

[Code] .....

View 3 Replies View Related

How To Select Range And Clear Based On LR Variable

Jul 28, 2008

I want to select and clear a part of a sheet.

here is what I have.

Sub clear_data()
lr = activesheet.usedrange.rows.count

Here is where I get lost in translation (syntax).

I want to select starting at Bcolumn through bycolumn but the row be set with the LR from above, since the rows always change.

I could write B2:by2000, but i want to use the LR variable to define the number of rows i have.

View 9 Replies View Related

Combo Box Dynamic Range Variable

Jul 22, 2008

If I had a combo box that look at 10 item in a range A1:A10 and the output value was in B1

Say a user added a new Item in A11. How could I get the range of the combo box to automatically extend to A11 or A12 if two new items are added.

I am trying to avoid having the input range as A:A and having lots of empty values?

View 9 Replies View Related

Set Range Variable To Growing Dynamic Range

Mar 6, 2008

I have been working on part of the code for my spreadsheet and it works fine in the spreadsheet “Databaseform” however when I copied the code to my master spreadsheet “Paul_PartLocDBCombo” it does not work, I get the error:

Method ‘ range’ of object ‘_worksheet’ failed
The code is then highlighted in yellow, the code is:
Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))

Meaning this part is incorrect but I don’t know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.

View 3 Replies View Related

Calculating Average In For Variable Last Row And Copying Across Another Dynamic Range

Apr 28, 2014

I'm trying to calculate the average for a range that begins with cell B15 and has various end points, depending on the day (since I'm pulling 2 actual years of data that strips weekends and holidays, as opposed to going back a set amount of days/years). Syntax for cell B4 to reflect the average of range B15 to LastRow? I tried several things and it didn't work. Rows 1-12 are being reserved for the summary calculations that will then be pulled into the final Dashboard.

View 1 Replies View Related

Automatically Clear Contents Of Cell Range

Jan 17, 2013

Is is possible to clear the contents of a cell range if a message box appears stating an error. I have tried the following code but the logic doesn't actually work and am struggling to achieve what I am trying to do.

My code so far is as follows:


If ActiveSheet.Range("F84") > 0 And ThisWorkbook.Worksheets("PES").Range("D24") = 0 Then _
MsgBox "Your Entitlement is currently 0", vbCritical, "Error"

The message box appears fine if the IF statement is true but if IF statement is false, the cell range of K84 to T84 on the current sheet is still cleared..

View 2 Replies View Related

Clear Cells In A Range Based On Other Cell Values

Jun 6, 2012

I have two rows of numbers, say D1 to F1 and D2 to F2. Row D2 to F2 will always have lower values.

The range below it is D3 to F100. I want the range to clear the contents of the cells in the range where:

a) the cell is > the x1 cell above it

OR b) the cell is < the x2 cell above it

If it is = or between the two cells, the value stays.


If D1 thru F1 is 4, 5, 7 and D2 thru F2 is 2, 4, 3, then:
D3 is 5, it is cleared
E3 is 4, it stays
F3 is 5, it stays
D4 is 2, it stays
E4 is 1, it is cleared
F4 is 9, it is cleared

Basically, the cell in the range looks up its own column, compares itself to x1 and x2 in that column. If it's greater than or less than, then it clears the contents, if not, the value in the cell stays.

View 3 Replies View Related

Clear The Contents Of Each Cell In A Range Without Losing Formulas

Dec 6, 2006

Is there a way to clear the contents of each cell in a range without losing formulas?

View 9 Replies View Related

Automatically Clear Range Based On Cell Criteria

Jan 9, 2007

I have the following Worksheet Change Event in my worksheet. The contents of range rng are not cleared.

Private Sub Worksheet_Change(ByVal Target As Range)

Dim rng As Range

rng = Range("F" & Target.Row & ":M" & Target.Row)

If Not Intersect(Target, Range("N5:N1000")) Is Nothing Then

If Target.Cells.Count = 1 Then

If Target.Value = "Yes" Then

Application.EnableEvents = False


Application.EnableEvents = True

End If

End If

End If
End Sub

View 9 Replies View Related

On Cell Selection, In Named Range, Clear Content Or Add Text If Empty

Jul 24, 2009

I wrote some code that toggles bewtweeen the word "Yes" and the function clearcontents.

What it does not do, is if you click on cell A1 and change it's contents and you click on the same cell again it does nothing. You need to click on another cell say A2 before you can go and change A1 again.

My code is as follows:

Private Sub Worksheet_SelectionChange(ByVal Target As Range)

If Target.Cells.Count > 1 Then Exit Sub

If Not Intersect(Target, Range("Documents")) Is Nothing Then
On Error Resume Next
Application.EnableEvents = False
If IsEmpty(Target) Then
Target.Value = "Yes"
End If
Application.EnableEvents = True
On Error Goto 0
End If

End Sub

View 3 Replies View Related

Dynamic Range Used Named Cell Range

Jul 7, 2014

Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.

Range("DataSummary),(??,??) doesn't work.

View 1 Replies View Related

Select Range In Worksheet Where Last Cell In Range Is Variable?

Jan 27, 2012

I am trying to write code to select a range in a worksheet where the last cell in the range is variable.

Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range


View 8 Replies View Related

Dynamic Range Based On Cell Between A Header And Footer Cell

Sep 2, 2008

I need to create a dynamic range based on cell between a header and footer cell. The header cell ( A8 ) will remain static, however, the footer cell starts at A10 and then will move down as rows are added.

View 9 Replies View Related

Dynamic Cell Range For Sparklines?

May 6, 2014

I want to use the offset function in a named range to be the data source for a column of sparklines, I want the sparkline to grow incrementally as data is updated per month.

The data in the table I want to add sparkline to is pre-calculated with SUMIFS formulae, and updated monthly from a dump of detailed data. I am trying to automate this as much as possible, and have pre-calculated future performance data in the table. I used an IFERROR to return a hyphen for the future reporting months.

The problem is, the sparkline is reading the hyphen as zero value, and the sparkline is showing as if it was reporting data to the end of the reporting period.

So my question is - is there a better IFERROR option that wouldn't be read as data, or is there a way to define the range by date compared to a data date?

View 7 Replies View Related

Refer To The Cell In Dynamic Range

Oct 4, 2011

I want to know all times this one presents the number 3 in the last 10 cells of the A column

For a static range I use this function


If I add a new cell which is the function for a dynamic range?

I can refer to the cell with this function = ADDRESS(MATCH(300;A:A);1)

but not as integrate it.

View 1 Replies View Related

Concatenating Of Dynamic Cell Range?

Jun 4, 2014

I have a example. I have 4 columns. first 3 columns ID, C1, C2 have the input data. Under a ID we have multiple number of rows. In this example we have 4 rows for ID1. But in real time it can be any number of rows under a single ID. When I click a button the values under ID 1 should get concatenated and stored under the Concatenate column.

I tried some macros but i cant get the logic behind finding the dynamically changing row counts under single ID.



View 5 Replies View Related

Dynamic Range When Starting Cell Not Known

Jul 4, 2007

I found dynamic range name across columns:

=OFFSET($A$1,0,0, COUNTA($A:$A),COUNTA($1:$1))

which expands across Columns in Row 1.

What if we don’t know range to be named in which row or column starts?

What will be a formula (assume range starts on cell named “BegRng”)?

View 3 Replies View Related

Dynamic Range. Start & End Cell Not Known

Jul 13, 2007

I would like to create a dynamic range of numeric type in a single column. Only the precise position of one middle cell is known, let's say $A$20, but the range is supposed to extend above and below $A$20 and to finally include all adjunctive, positive and negative numbers in that very column.

Having read the ozgrid-resources on dynamic ranges let me experiment with the following line, however, it seems to include all entries in the column disregarding the format type or the fact that they should all be adjunctive (meaning that wherever there's a text entry it should be seen as the natural end of it): ....

View 7 Replies View Related

How To Name A Dynamic Range & Make A Validation List (of 2 Dynamic Ranges)

Dec 22, 2009

I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.

Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?

First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both

View 9 Replies View Related

Reference Last Cell In Dynamic Named Range

Nov 14, 2006

In the attached spreadsheet I am trying to always reference the sum column from Qty in Det Est.

This is because the number of roads changes for each project.

I created a dynamic range name surfacing with the following formula:
=offset(qty!$a$1,0,0,counta(qty!$A$A), counta(qty!$1$1)).

My question is what formula do I use to reference the sum column for each row on the Det Est Sheet.

View 4 Replies View Related

Dynamic Named Range = Last Used Cell In Column; RC In Formula

Apr 28, 2009

Can you use Row & Column numbers in a Formula the way you can in VBA?

I want to do the same as Range(Cells(5,2)) in VBA EXCEPT in a Formula
because I want to use named ranges for the Row & column entries. (And I don't want to have to run a macro every time a change is made. The spreadsheet is huge enough already. It's slow on my machine & I have the biggets baddest PC in the company!)

Using Formulas only, (not VBA) I would like to create a Dynamic Named Range, LastUsedRow, which is the ROW NUMBER of the Last Used Cell in Column C
(it would = 470)

Also I have an existing Named Range HeaderRowNum (it = 16)

Currently I have a LOT of formulas like:

problem is any new data must be added between Rows 17 & 470

So I would like to create dynamic new forumlas to read like:
SUMPRODUCT( (Cells(HeaderRowNum+1,5) : (LastUsed Row,5)) * (--(Cells(HeaderRowNum+1,93) : (LastUsed Row,93))>0) )...............

View 5 Replies View Related

How To Only Allow Multiple Cell Selection If Named As Dynamic Range

May 13, 2014

I have a spreadsheet where I've disallowed selection of multiple cells using the code in the 2nd box below, but is there a way to override this protection to allow selection of a named range? My reason for doing so is to open this workbook as read only from code in another workbook and copy the entire table. My code for doing that works ok (I frequently use it in other workbooks) but, in this case, my need to disallow selection of multiple cells in this particular worksheet is tripping me up.

This is the code I'm using to try and pull the data into another workbook:


Workbooks.Open Filename:=ThisWorkbook.Path & "RSL-Jobs-Register.xls", ReadOnly:=True
Application.GoTo Reference:="JobsTable"

and this is the code I have in RSL-Jobs-Register.xls which is preventing me from selecting the (dynamic) named range called "JobsTable".


''' I'm thinking I could have something here like (in plain English) "If selected range "JobsTable" Then"
''' (apply the code below) but I'm not sure of the code

If Selection.Cells.Count > 1 Then
MsgBox "Sorry, operations on multiple selections aren't allowed here", vbCritical
Exit Sub
End If

The formula for the dynamic named range called "JobsTable":


View 1 Replies View Related

Pivot Table Dynamic Range, Last Used Cell Not Same Column

Oct 26, 2009

I've got two pivot table reports working off one dataset.

I've named the range Recharge with the formula as below..

=OFFSET('Recharge'!$A$1,0,0,COUNTA('ABC Recharge'!$A:$A),16)

But this uses column A as the longest column... but sometimes it will be column I - how can the formula be adapted ? or can it be ? i've been looking at the Max function and trying to incorporate that but my limited brainpower has gone to mush.

View 9 Replies View Related

Dynamic Variable Name

Feb 16, 2007

I am trying to assign a value to a variable based on the value of another variable. I have about 15 items each with about a dozen specifications to them. I'd like to compare the specifications of "MyItem" to those of "OtherItems". Problem is MyItem changes constantly, and I don't want to hardcode the values for all of these items for every possible value of MyItem. Plus, I would have to create new code every time there is a new item. It just seems like REALLY bad coding. Please see below:

Sub MyItemHardcoded
Dim MyItem As String
Dim OtherItems As String

Dim MyItemSpec1 As Long
Dim MyItemSpec2 As Long
Dim MyItemSpec3 As Long
Dim MyItemSpec4 As Long
Dim OtherItemsSpec1 As Long
Dim OtherItemsSpec2 As Long
Dim OtherItemsSpec3 As Long
Dim OtherItemsSpec4 As Long

I was trying to use a dynamic variable name to cut through this.
Sub DynamicVariable
Dim MyItem As String
Dim OtherItems As String

Dim ThisItemSpec1 As Long
Dim ThisItemSpec2 As Long
Dim ThisItemSpec3 As Long
Dim ThisItemSpec4 As Long
Dim OtherItemsSpec1 As Long
Dim OtherItemsSpec2 As Long
Dim OtherItemsSpec3 As Long
Dim OtherItemsSpec4 As Long
Dim ItemNames(1 To ItemCount)

I tried using the evaluate method, but it returns an error when the expression evaluates to text - even if that text is a variable name. I've tried some off-the-wall ideas as well, but nothing seems to work. There has to be an easy way to do this. I'm just totally missing it.

View 9 Replies View Related

Copyrights 2005-15, All rights reserved