I'm trying clear the contents of a column range when the cell above this column range is empty. I know how to do this for one cell, but I would like it to work for a rangefrom R15:BB15.
If IsEmpty(Range("r15")) Then
Range("r16:r35").Select
Selection.ClearContents
End If
End Sub
There is data(numerical) or blanks in each of the cells in the range H32:O37
I want to clear the contents if they are a duplicate of the previous line.
Looking for a macro hopefully. Found many to delete the whole row but just the specific range based upon the duplicate criteria..As there is data surronding that area do not want to delete whole row just clear that specifc area.
H32:O32 clear contents if same as H31:O31 if any valuse are different then stays the same
H33:O33 clear contents if same as H32:O32 if any valuse are different then stays the same
H34:O34 clear contents if same as H33:O33 if any valuse are different then stays the same
H35:O35 clear contents if same as H34:O34 if any valuse are different then stays the same
H36:O36 clear contents if same as H35:O35 if any valuse are different then stays the same
H37:O37 clear contents if same as H36:O36 if any valuse are different then stays the same
I need some code that will clear the contents of a Row Range(C:T) if either of the contents of cells X and Y = "E"
The code needs to look at cells X17 and Y17 and continue looking until it gets to X216 and Y216
So - If X = E but Y does not, then the row range C:T must be cleared.
If Y = E but X does not, then the row range C:T must be cleared
If both X and Y = E, then the row range C:T must be cleared
If the letter E does not exist in either X or Y, then the row must be left alone
I'm using a macro to copy the results of a formula and paste the values only on another sheet. The result includes lots of "blank" rows. I have another macro to get rid of the empty rows and move the information up.
It's not working because the "blank" rows aren't empty. Even though I paste values only, experimentation shows that the cells that appear blank return a false to the ISBLANK test with a length of 0.
So now I think I need a macro to run after the pastespecial command to look for cells within a range with a length of zero and delete the contents of those cells, but leave alone anything with a length of >0.
I am brand new to the idea of using VBA, but I have successfully cobbled together some stuff and can usually modify things to work.
It seems I need to maybe use some sort of IF statement along with a LEN and ClearContents. I don't want to delete the blank cells, just make them truly empty so that all of my actual data stays where it should, and my delete empty rows macro works correctly.
I did a search and see some info on clearing contents of columns or rows, or clearing contents based on the content of other columns or rows, but I'm unsure of how to tell it to search each cell within a range and clear the contents of 0-length cells to make them truly empty.
I am filtering column S in a sheet to show all rows with a date after the end of the previous month - i.e. >= 01/01/07. What i want to do is clear the contents of those visible cells in column S. I tried the code below (got it on this site) but it works its way up from the bottom of the sheet until it finds the first visible row and then clears the contents of column S in each row above it, whether it is visible or not.
Sheets("Planning").Select
With Range("e2:C2")
.AutoFilter field:=5, Criteria1:="<=" & Sheets("Filtered Statistics").Range("c3")
.AutoFilter field:=19, Criteria1:=">=" & Sheets("Filtered Statistics").Range("d3")
For i = Range("s65536").End(xlUp).Row To 3 Step -1
If InStr(1, ">=" & Sheets("Filtered Statistics").Range("d3"), Cells(i, 19).Value) = 0 Then
Cells(i, 19).ClearContents
End If
Next i
.AutoFilter field:=19
End With
I have a column with various values in, string and numeric. The strings I want to keep have "," in and letters one side and "space" on the other. All the cells I want cleared do not have ","
The rest of what I'm using works fine accept this line which forces an error.
[Code]....
I'm trying to clear cell contents based on a defined name given to a set of various cells in my worksheet. The cells are not continuous, but since they're given that defined name, I don't think it matters.
The defined name is listed as "CommentsFields".
The worksheet name is listed as "QPRForm_V6"
I found a similar thread, but cannot get it to work with what I'm looking for. I'm relatively new to writing VBA/macros, so I'm not sure what to do.
If I have a pick list, or drop-down list, in cell B21 and one of the options in that list is "Clear", how can I get the contents of cell C21 to be cleared when I select the "Clear" option in B21?
Constraint... Don't want to use VBA.
I am thinking of hiding a formula somewhere other than in C21 that evaluates B21 and does an If Then kind of deal to clear C21.
I have a range variable named data I want to clear all the data in the 3rd column in the range variable I know how to reference a single location in the range variable but not a whole column. see example code below
[Code] .....
I want to have users fill out. While it is possible to have it Read Only so that they always SaveAs I would rather put in a macro to clear the user input fields. I have done this in Excel 2003 and when I try using the same techniques in 2007 I get an Error 400.
I have all the cells (some are merged cells) in a named range and have the following code for clearing them.
Is is possible to clear the contents of a cell range if a message box appears stating an error. I have tried the following code but the logic doesn't actually work and am struggling to achieve what I am trying to do.
My code so far is as follows:
Code:
If ActiveSheet.Range("F84") > 0 And ThisWorkbook.Worksheets("PES").Range("D24") = 0 Then _
MsgBox "Your Entitlement is currently 0", vbCritical, "Error"
ActiveSheet.Range("K84:T84").ClearContents
The message box appears fine if the IF statement is true but if IF statement is false, the cell range of K84 to T84 on the current sheet is still cleared..
Is there a way to clear the contents of each cell in a range without losing formulas?
View 9 Replies View RelatedI have a workbook with two sheets of data. I want to hide column B of Sheet2 and clear contents of range B2:B50 if the value in A1 of Sheet1 is "a".
View 2 Replies View RelatedI am trying to find something that would allow me to have a spreadsheet clear the contents of a certain cell based on the selection made from a data validation list which resides on the same row. This can best be described with an example.
The user selects anything but " " or "none" from the validation list, which for this example resides in C5, would trigger code to clear the contents, if any, in AA5. If " " or "none" is chosen the value remains.
This capability should be available for each row through 100.
I am trying to clear the contents of a range of contiguous cells (containing formula) in Excel 2010 64bit. But it is taking a LONG time (read >30min to clear a range 288 x 100). Originally was doing it in VBA but it was taking too long so I started stepping through the macro and identified that the slow down was occurring on a particular sheet only. So the problem is in Excel....not VBA because it is still very slow when deleting the same range in Excel without using VBA.
I've tried all the usual suspects including: Application.EnableEvents = False (run from the VBA Immediate window when using Excel without VBA), Setting to Example of slow clear contents5.xlsxExample of slow clear contents5.xlsxManual Calculation, Turning off screen updating, deleting all the conditional formatting on the sheet, removing any data validation from the sheet (yes all these at the same time). There are no links to external workbooks. I've even tried in VBA changing from .ClearContents to .Value = vbNullString. All to NO AVAIL! By way of background the file is about 72Mb #.xlsm.
If I try to clear contents of larger ranges on other sheets in the same workbook it is instantaneous. If I copy the problem worksheet off to a new workbook, I can delete the problem range almost instantly. Why deleting a range of cells should take so long! Again to clarify, I am using the terms "delete" and "clear contents" interchangeably, but they both mean "clear contents" (not delete and move up cells). P.S I've also looked into the reported conflict between Excel and Google Desktop Office Add-in (Office Button->Excel Options->Addins->Com Addins and deselect Google Desktop Office Addin) but I didn't have Google Desktop Office Add-in so it isn't that.
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedI am relatively new to VBA. I am creating an attendance calendar that tracks employees calling sick, late etc.. It is a point based system. What I am looking for is, a way to clear the point value that was manually entered in a specific cell (I3), if there is a Value manually entered in (CU3). Each column in my worksheet is for a specific date ie; I3 is the cell where I enter the points (1.00) for that employee by calling in sick on 3/1/2013, (Column "I" is for 3/1/2013). After 90 days, this point accumulated by the employee does not count against them, so I need that point entered in (I3) to either = 0 or the cell contents to be cleared if there is a value entered in cell (CU3) which is 91 days after, so my (A3) cell does not add that point acquired on 3/1/2013.
I need this to run in a range (I3:I450) so if any value is entered into (CU3:CU450) it has the same result and continue to for (J3:J450) so if any value is entered into (CV3:CV450) and so on..
I am a financial administrator & every month I have down load 4 bank accts as CSV, import into xl & code (CACode) the amounts for our accountant. I have VBA that formats, adds headings & formula etc but I have a problem/s. In H col I place CAcode & I use a sumif formula in I col to sum all the amounts with that have the same CAcode. For simplicity sake I copy the sumif down & then sort H col ascendindingly (this is done by VBA). Now I am trying write a macro to clear the contents of the cell in I col
if eg h60 = h59
then I60 clearContents, Select h59
Else select H59
Do until H3 is selected
Psuedocode
Select table (A2:I Xldown)
Sort Table by CAcode (H Col)
Set Range as H3:Xldown
Select Last cell with CAcode (Xldown) in H col
For every cell in Range (H3:Xldown)
Use If/thenIf Last cell = 2nd Last cell (H Col) then
Clear contents of I col (last row)
select 2nd Last cell (H Col)
Else 2nd Last cell (H Col)Next Cell
I have to use Xldown to select range as the range will be variable each month & for each bank acct. I need to clear contents of cell to verify that all the sub-totals of unique CAcodes of the CAcoded amounts = the totals Because I may have up to 120 rows X 3 bank accts I am slowly using vba to do my work.
Sub sort_And_delete_Sumif_amounts()
Dim r As Range
'Select range to sort
Range("A2:I98").Select
'Sort CAcode in H col ascendingly
Selection.Sort Key1:=Range("H2"), Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
'select range for comparisomn of CAcode
Set r = Range("H3", Selection.End(xlDown))................
I need to clear the contents of a columns G and H starting 11th row based on what is there in F column. The macro should check for last non-empty cell in column F starting F11 (assume it finds F30 to be last non-empty cell), then it should clear the contents of G11 to G30, H11 to H30.
View 1 Replies View RelatedI need a macro that will clear the contents of all cells shaded white in range c1:c20.
Clear the contents, leave the cells shaded white.
I have a range on worksheet "CONTROL" from S129:S228. There are 100 rows there. I have another range on the active sheet from B17:N116, also 100 rows. If S129 has a value of 1, then I need row 17 on the active sheet to be cleared (columns B-N). And so on all the way to the bottom of the ranges. If it has no value in the cell, then no clearing takes place. So it needs to test the whole range at once. I really have no clue what the variants and ranges should be, and have NO CLUE how to define a variable range so that I can use the value that R is on in the testing cycle to tell the active sheet which row to delete.
View 3 Replies View RelatedI want to select and clear a part of a sheet.
here is what I have.
Sub clear_data()
sheets("sheet1").select
lr = activesheet.usedrange.rows.count
Here is where I get lost in translation (syntax).
I want to select starting at Bcolumn through bycolumn but the row be set with the LR from above, since the rows always change.
I could write B2:by2000, but i want to use the LR variable to define the number of rows i have.
I am good at excel but an infant with VBA. I have inserted a checkbox onto my worksheet. I want it, when checked, to select a row of data ("k5:k16") from Sheet 1 and copy it to ("a1:a12") in Sheet 5. When the checkbox is unselected, I want the ("a1:a12") to be cleared. I've tried several different ways to copy and continue to run into errors. I know there is a simple solution, but it's beyond me.
View 2 Replies View RelatedIs there are macro that will allow me to: Clear Print Area, then Set Print Area based on user selection and finally print the Print Area to fit 1 page? I tried to search for solutions, but couldn't find any that matched my problem.
View 2 Replies View RelatedI have two rows of numbers, say D1 to F1 and D2 to F2. Row D2 to F2 will always have lower values.
The range below it is D3 to F100. I want the range to clear the contents of the cells in the range where:
a) the cell is > the x1 cell above it
OR b) the cell is < the x2 cell above it
If it is = or between the two cells, the value stays.
Example:
If D1 thru F1 is 4, 5, 7 and D2 thru F2 is 2, 4, 3, then:
D3 is 5, it is cleared
E3 is 4, it stays
F3 is 5, it stays
D4 is 2, it stays
E4 is 1, it is cleared
F4 is 9, it is cleared
Etc
Basically, the cell in the range looks up its own column, compares itself to x1 and x2 in that column. If it's greater than or less than, then it clears the contents, if not, the value in the cell stays.
I have the following Worksheet Change Event in my worksheet. The contents of range rng are not cleared.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
rng = Range("F" & Target.Row & ":M" & Target.Row)
If Not Intersect(Target, Range("N5:N1000")) Is Nothing Then
If Target.Cells.Count = 1 Then
If Target.Value = "Yes" Then
Application.EnableEvents = False
rng.ClearContents
Application.EnableEvents = True
End If
End If
End If
End Sub
i am trying to use clearcontents with the below code but i get an error,
With Sheets(1)
With .Range("J7")
.ClearContents Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
.Formula = "=H7-I7"
.AutoFill Range("J7:J" & .Range("A" & .Rows.Count).End(xlUp).Row)
End With
End With
I want the function of clear contents to work based on the value of B4. If I run the code with clear content part excel crushes.
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("B4") = "Basic" Then ''*** B4 is adropdown ***''
ActiveSheet.Unprotect
'Range("B10,F10,H10").ClearContents ''*** if I run this part the excel crushes ***'''
Range("B10,F10,H10").Locked = True
[Code] .....
I am looking for a way to remove text from a cell if it is 2 characters or less but do nothing if the text is longer than that. Is there a way to do this with either a function or an advanced find?
For more detail, I have a list of middle initials and last names. The cells are either a middle initial by itself like "D." or they are a last name like Jones. I want to go through and delete the cells that have the middle initial and leave the ones with the last name. So if there is a function that will evaluate the cell, and if it is 2 characters or less, then delete the contents. If greater than 3, leave it alone.
I have a range of cell content to be clear (Value only) but no formula in those cell.
The range is populated in cell H106.
Example cell
if cell H106 = D5:E102 then clear the value value only in cell range D5:E102
if cell C106 = G5:H102 then clear the value value only in cell range G5:H102.