Clear All Criteria In All Autofilters On A Page
May 22, 2009
I have searched these boards (and found wonderful ideas), but can't find a better solution.
Is there a quick way to clear all the autofilters on a page (or all of them in 1 row)?
I am using this code, but it is very slow.
For i = 1 To 21
Selection.autofilter Field:=i
Next i
View 9 Replies
ADVERTISEMENT
Nov 28, 2006
I need to remove all existing page breaks in a document and add a page break every 72 rows. I've tried some similar codes from this forum with other functions that I don't need in it.
View 7 Replies
View Related
Feb 26, 2009
I have a macro that I found on the net for copying a filtered selection and copying to a new sheet. I would like to alter it slightly so that it just clears the sheet called 'Interval tasks' instead of deleting it and creating a new one.
View 8 Replies
View Related
May 28, 2009
2 autofilters i am using, they are both initiated using VBA code and criteria on a control sheet however it appears that one is cancelling the other out, for example i manage to get my date filtered but no times, or if i alternate the run order i get times filtered but no dates i have enclosed the code below ...
View 10 Replies
View Related
Jun 2, 2006
I am trying to figure out if it is possible to retrive the list of filter criteria in each filter of the filters collection using VBA. I could trawl through the data and retrive a unique list but I think it would take longer than if I could use what is already there.
I intend to use the list in a combo box elsewhere in the workbook......it's all to stop inquisitive little users accidently changing data and whining that thier figures are misteriously wrong.....
View 5 Replies
View Related
Aug 4, 2012
I have a workbook that has lots of data that I dont need. In column B if the data dont start with the letter M/T/W/F/S I need the contents clearing.
View 1 Replies
View Related
Sep 18, 2007
I am using the following code to select rows in a filter.
Selection.AutoFilter Field:=Worksheets(" Dashboard"). Range("G1"), Criteria1:=Worksheets("Dashboard").Range("H1")
This code runs when I click a command button on a userform.
When I load the userform up again I want to clear off the previous filter before I filter again as there are 4 columns which have filters on.
I have tried using ActiveSheet.ShowAllData before filtering again but this code falls over if there isn't a filter already on.
View 4 Replies
View Related
Aug 28, 2008
I need some code that will clear the contents of a Row Range(C:T) if either of the contents of cells X and Y = "E"
The code needs to look at cells X17 and Y17 and continue looking until it gets to X216 and Y216
So - If X = E but Y does not, then the row range C:T must be cleared.
If Y = E but X does not, then the row range C:T must be cleared
If both X and Y = E, then the row range C:T must be cleared
If the letter E does not exist in either X or Y, then the row must be left alone
View 13 Replies
View Related
Apr 18, 2005
I'm trying to write a macro that clears the cell in the range V10:X14 if the value of that cell equals 99.
Sub MyDeleteCell()
For i = 10 To 14 Step 1
For j = 22 To 25 Step 1
If Cells(i, j) = 99 Then Cells(i, j).Clear
Next i
Next j
End Sub
It's giving me a "Invalid Next Control Variable reference" I've tried defining i and j as Integers but that didn't work.
View 3 Replies
View Related
Feb 7, 2013
I have a spreadsheet with data to row 5000. I have column Y that has an "X" in it. I would like some VBA code to look at each row up to 5000, in column Y for the "X". If it is there, clear the cell contents on the current row in columns T, U, and V.
I've tried modifying some existing code (excluding the Y column range of 5000) but keep getting a "Compile error: Wrong number of arguments or invalid property assignments". How do I set the 5000 limit and get this code back on track?
Sub RemoveBankDelay()
n = WorksheetFunction.CountIf(Range("Y:Y"), "X")
For i = 1 To n
[Code]....
View 9 Replies
View Related
Nov 1, 2006
I would like to seek help on how to delete a cell that has data in it and that has colourfill. E.g. Cell A1 shows "Occupied" and Cell A1 has a blue colour fill.
Need help on how to delete that cell's data and remove the blue colour without having to manually do so.
View 4 Replies
View Related
Jan 25, 2009
I have this code below which autofilters a range and selects the data i need, there is also a small offset part that leaves the active cell as the one in the top lef of the needed data. I also have the row count of the data in cell G1. What I need to do is something along the lines of:
View 3 Replies
View Related
Jun 11, 2008
I have an issue where users to a work book are selecting autofilter and then saving the document with rows filtered out, which I wish to prevent or at least warn them to remove the filter before allowing the save function.
The document is never 'Save As', it's always 'Save' from the toolbar icon.
They should be permitted to save the document, but only after this check has been completed and a message issued if the filter is on.
View 4 Replies
View Related
Dec 13, 2006
In my code I am searching a spreadsheet for certain states and deleting rows that have states I want to exclude. Is there a way to do this with a list of states, instead of having to make many for loops?
For i = lastrow To 2 Step -1
Cells(i, 4).Select
If Cells(i, 4).Value = "PA" Then
Rows(i).Select
Selection.ClearContents
End If
On Error Resume Next
Next
For i = lastrow To 2 Step -1
Cells(i, 4).Select
If Cells(i, 4).Value = "TX" Then
Rows(i).Select
Selection.ClearContents
End If
On Error Resume Next
Next
View 5 Replies
View Related
Oct 1, 2006
i created a work sheet with the help of the wonderful people on this forum. my boss loved it! one problem they now want it to automaticly take out a date and time of the cells when the date rolls around again.
example:
12/25/05 late 00:20:06 when 12/25/06 rolls around they want the system to automaticly see it and delete it out with the amount of time they were late or sick ect.... or if the sup was out that day and comes in the next day the system will see that the date has past and will up date the info. the other catch is i need it to move everything up one space when it deletes somthing. i want it to read j18 and k18 as one and so through j and k 40 same for l and m n and o ect.... i attached the sheet
View 9 Replies
View Related
Jan 9, 2007
I have the following Worksheet Change Event in my worksheet. The contents of range rng are not cleared.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim rng As Range
rng = Range("F" & Target.Row & ":M" & Target.Row)
If Not Intersect(Target, Range("N5:N1000")) Is Nothing Then
If Target.Cells.Count = 1 Then
If Target.Value = "Yes" Then
Application.EnableEvents = False
rng.ClearContents
Application.EnableEvents = True
End If
End If
End If
End Sub
View 9 Replies
View Related
Jun 9, 2009
When I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies
View Related
Mar 26, 2009
I want to have a small button at the top of the sheet that when pressed, will automatically reset all filtered autofilters back to show all.
View 9 Replies
View Related
Aug 22, 2006
I have a vertical list of data which is sorted in to "Regions" 1 to 7 there could be up to 25 instances of each Region, but I have no way of knowing.
I want to be able to select each Region and place it in it's own column.
View 9 Replies
View Related
Jul 17, 2013
I'm attempting to clear the contents from a range of cells on rows where a cell string may equal R, X, XX, Y, Z, ZX, #N/A.
The macro runs fine until it gets to a cell that contains #N/A. How to get this to work?
Sub Recalculate()
Dim r As Integer
r = ActiveSheet.UsedRange.Rows.Count
Application.ScreenUpdating = False
For Row = 13 To r
[Code] ........
View 2 Replies
View Related
Jun 17, 2014
I have been using the below macro that has worked a treat, however I need it to copy as value as when it moves over some of the formulas and links go a little funny.
[Code] ......
What amendment I would make so that it pasted special as value?
View 1 Replies
View Related
Feb 10, 2014
I am in need of a macro that will:
1. Check cell B1 for my named regions
2. Find all citys in that region from another worksheet
3. Copy the specific details
4. Highlight the information that has just been copied and create a bar chart for comparison
Data to be picked up from "Inc 8%" sheet.
Headings are the same on both the worksheet the information is being taken from and being pasted to.
I need City, Year 1 Turnover - Year 10 Turnover data to be copied.
Region Help.xlsm
View 2 Replies
View Related
Nov 10, 2006
I have a report which is split into page sized chunks, in column P I have an identifier Planned, Booked or Running.
Is it possible to build a macro which says something along these lines
If P1 = "RUNNING" Then
Print that Page
Else
Go to P44
If P44 = "Running" Then
Print that page
Else
Go to P87
and so on until the cell selected is blank then stop.
View 5 Replies
View Related
May 26, 2009
I have an items list on page 2. On page 1 I want to create a drop down menu in C2 that references the list on page 2. Then when I choose an item, I want the additional information in cells D2 and E2 to come in automatically. The list on page 2 will be expanding daily, and when I expand it I can simply insert a new row so I correctly alphabatize it instead of constantly having to resort it.
With that said....
1. How do you put in the drop down box that references information on a different sheet?
2. What is the best way to reference the information in my ever expanding situation: Index/Match, Vlookup, Lookup, or something I havent mentioned?
View 14 Replies
View Related
Jul 8, 2014
The report that I am trying to build relies on DCOUNTA formulas.
This report has 200 lines and 200 columns approximately. Each of these cells would be a DCOUNTA formula. I have a separate sheet, 'Criteria', where I intend to describe all of my criteria for the DCOUNTA formulas.
My problem is that for each DCOUNTA cell in my report, I have to create 2 rows and 5 columns worth of criteria information... so, for 40,000 cells to populate, I need to create a huge sheet of criteria.
So, while I could do the above, and it would take me some time, more efficient and elegant way to spend my time in order to get this report display DCOUNTA formulas?
For more context, I am trying to present information for 100 individual salespeople, monthly and year to date. For each cell, I need to tell DCOUNTA that the date needs to be comprised in the current period (2 columns), what the name of the salespeople is, and what the nature of the information is, which could be more than 2 additional columns.
I can to some degree autofill most of this, with some OFFSET magic, but its still feels like an ugly way to achieve my objective.
View 9 Replies
View Related
Jan 10, 2010
I want to achieve is a procedure that inserts horizontal page breaks at certain parts of the sheet where there is a cell equal to 2. Here is the code I have so far.
Sub insert_pagebreak()
Dim printbreak_cell As Range
Dim j As Long
Dim i As Long
ActiveSheet.ResetAllPageBreaks
Set printbreak_cell = Range("AD1")
j = 1
For i = 1 To 100
If printbreak_cell.Value = 2 Then
Set ActiveSheet.HPageBreaks(j).Location = printbreak_cell
j = j + 1
End If
Set printbreak_cell = printbreak_cell.Offset(1, 0)
Next i
End Sub
Everything works until the cell value reaches a 2, and then once it goes into the If statement I get a 'Application-defined or object-defined error' at the below line.
Set ActiveSheet.HPageBreaks(j).Location = printbreak_cell.............
View 3 Replies
View Related
May 18, 2006
I have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.
Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................
View 6 Replies
View Related
Aug 15, 2014
I'm having a problem with a macro clearing a formula in a cell. I have the same type of cell that doesn't have the problem but I can't find the difference between the 2 cells or difference in vb that's making it happen. I have to intentionally cause this to happen but don't see why it's happening. Do I need to attach workbook and describe what's happening? I have been copying and pasting from different sources as well as paying to have it created/started but it was expensive(for me) and I make nothing off of it, just use it at work. I am not proficient in Excel or vb but I'm desperately trying to learn as I go so as not to fork out a few hundred dollars again.
here's atleast the vb for the macros:
VB:
Sub clearclientinfo() '
'
'
'
Sheet5.Select
[Code].....
View 9 Replies
View Related
Mar 26, 2006
I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?
View 7 Replies
View Related
Oct 16, 2013
I have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.
View 4 Replies
View Related