I have a vertical list of data which is sorted in to "Regions" 1 to 7 there could be up to 25 instances of each Region, but I have no way of knowing.
I want to be able to select each Region and place it in it's own column.
I have a large data set (from columns A - I, with over 10,000 rows) of information located on Sheet1 that I need to be able to go through to find the criteria (which is text and is located in column B) I'm looking for. I know how to write the VBA code to use Excel's AutoFilter option .... what I don't know is how can I can identify and copy the results the AutoFilter pulls up, from Sheet1 into another sheet because the data is on a number of different rows.
For example, I have to search column B three separate times for the following criteria:
1. xyz
2. acb
3. hij
this is what I have for the autofilter:
Range("A1:I1").AutoFilter Field:=3, Criteria1:="=xyz"
Today, I may find the "xyz" information on rows 6-150, 755-787, 1021, and 8524-8999, whereas tomorrow "xyz" may be on rows 51-101, 8547, and 9989-9991.
The data to be filtered is in several sheets, and once filtered is to be copied to a destination sheet (in this case "Temp"). The criteria for advanced filter is on an altogether different sheet (in this case "Reports"). The macro is actually simplified for the purpose of the question, and I want to re-use the code several times, hence the use of variable "filterRng". When I run it, I get the subject error at the bolded line in the code below. I'm thinking that the Advanced Filter doesn't like a variable as a range reference, as it runs perfectly well if the commented out line below the problem line is used instead.
Sub Test()
Dim i As Integer
Dim rngData As Range
Dim filterRng As Range
Set filterRng = Sheets("Reports").Range("A121:K124")
Application. ScreenUpdating = False
Application.DisplayAlerts = False
I have a folder with 250 files. Each of the file has only one column. I need to search the rows starting with "Party Name" and copy them in any one row. I want a macro either to copy the filtered results in the same file or a fresh workbook.
Column A
row 1 ABCDE
row 2 FGHI
row 3 Party Name:Abcd
row 4 JKLM
row 5 nopq
row 6 STUV
row 7 Party Name:ryz
row 8 Party Name:mno
row 9 XYZ
I want the results as below:
Column A Column B Column C Column D
row 1 ABCDE Party Name:Abcd Party Name:ryz Party Name:mno
Trying to paste filtered results except header row. My code below pastes the header row for "Details" 2x. I tried altering the row to row 2, but that caused incorrect results to be returned.
Detail - Sales
First I filter the data range for " Total Sales"
Paste the results with header row to wsDetails
Details - Details
Then filter the data again for "N"
I would like to paste these results to wsDetails w/o the header
Option Explicit
Sub comp_pl_ytd_Totals()
Dim wbBook As Workbook
Dim wsData As Worksheet
Dim wsTotals As Worksheet
Dim wsDetails As Worksheet
Dim wsExtract As Worksheet
Dim rngData As Range
Dim rngCrit As Range
Dim rngDest As Range
Dim arrCrit
Dim myRange As Range
Dim C As Range
Dim lngrows As Long
Dim strFormula As String
Dim rngCase As Range
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.Calculation = xlCalculationManual
End With................
2 autofilters i am using, they are both initiated using VBA code and criteria on a control sheet however it appears that one is cancelling the other out, for example i manage to get my date filtered but no times, or if i alternate the run order i get times filtered but no dates i have enclosed the code below ...
View 10 Replies View Relatedapply a count to a sheet which adjusts when filtered. I have attached a sheet, but as you can see the filter is returning the incorrect count as it is including the rows which are not displyed
View 2 Replies View RelatedThe following code filters my sheet to show only values less than 0 in column T, (column 20).
View 5 Replies View RelatedI have a monthly work phone bill which I receive as an Excel document. I have to pay for personal calls and want to create a list of personal numbers which can be filtered and the costs summed. Prefereably an add in would be best. Possibly 2 icons, one for adding my personalised numbers (usually under 10 numbers). This could be saved to my home drive on the network so I can run the formula from any PC on the network.
The other icon would be to run the report and do the calculations. So it only really looks in 2 column (mobile num, cost).
How do I rank filtered results? I do not wish to use VBA if possible.
View 4 Replies View RelatedI am trying to sum the results of a filter via VBA but cannot seem to get it right. I have the code to count the number of "active" rows, now to get an average I have been trying to use similar code to get the sum so I can divide the sum by the number of rows not filtered out. I get the error "Unable to get the Sum property of the WorkSheet function class" This is the code I have butchered:
Set R = ActiveSheet. Range("d1"). CurrentRegion
Set R = R.Offset(1, 0).Resize(R.Rows.Count - 1, R.Columns.Count)
For i = 1 To R.Rows.Count
If Not R.Rows(i).EntireRow.Hidden Then
intCountCancelled = WorksheetFunction.Sum("Cancelled") ' cancelled is a named range. This is the line its failing on
End If
Next i
Based on filtered data I want to produce a result for the Average trade gain.
Lets say I have 100 rows of data, and based on filtered settings the rows reduce to 5 rows of results.
Of those results I want to find an average of all the positive values (trading profits) and ignore the negative ones.
$2000
$1500
-$700
$4000
-$1000
The answer should be (2000+1500+4000)/3
The need for filtering makes this problematic. I am inclined to use SUBTOTAL as it applies to filters rows only, but I can't see how to use an IF statement within it.
In addition to this I would also love to know how to subtotal all positive values without averaging.
I have a list of data entries. I use auto-filter, to view them according to which category they belongs to. However, when I wanted to sum just the quantity associated with the criteria which I am filtering, I couldnt find a formula which does that
View 2 Replies View RelatedI am populating a 2nd temporary worksheet from a primary using autofilter which works just fine. I have been asked to set it up to populate the 2nd sheet using the same autofilter criteria across two or more of the primary sheet columns. I have been looking through the forums and found an article in which this process is described, #2 The power of Autofilter in VBA - Part 2, and I would like to ask if this will do the job for me.
I did attempt to create my own code, but it didn't work with a loop that I created. I do use input boxes to gather criteria from the user. I have put a copy of my code below which doesn't work, but need to know if the code in the article mentioned above will work?
Option Explicit
Private Sub UserForm_Initialize()
On Error Resume Next
' Dim rheadings, cl As Range
'
' Set rheadings = Worksheets("CONTACT").Range("A1:F1")
' For Each cl In rheadings
' Me.cbxSearchWhere.AddItem cl.Value
' Next cl
End Sub
Private Sub UserForm_QueryClose(Cancel As Integer, _ ................
I have designed a Macro to use an Advanced Filter to search for specific criteria in different columns. I would like the results to bold or highlight the cell if it meets the criteria for the advanced filter. There are multiple numbers in each row that are associated with each record, and I would like to be able to see which of these triggered the filter to work for that row by bolding or highlighting the individual cell.
View 8 Replies View RelatedI have a workbook with 50+ sheets. Within each sheet are rows of data in column A that I'd like to search for specific text.
I'd like to search each row from every sheet for specific words (e.g. "7 days" AND "Monday" AND "Tuesday" etc.) then copy the entire row containing all my search text in a new sheet on column A along with the name of the sheet it was found in in column B and the row number it came from in column C.
What I am trying to accomplish is to search through all the sheets and post results in new sheets for each search string.
I have a macro which scans column "AV" in Sheet1 and if a particular value is found it will copy certain cells from that row and paste them into Sheet2 on Row 10 starting with column "E".
With the current code I only paste a single instance, if the value is found more than once I only have the last one pasted. How can I best set this up so it will paste ALL found value results within Row 10?
The four copied results do not have to be in separate cells, it is actually best if the cells are combined. On Sheet2, cells E10-H10 can also be setup to have the data pasted across all four cells and that way Row Height AutoFit would take care of expanding the row's height to accommodate the possibly of having four or five sets of results being combined together and pasted into E10.
Rather than the typical result appearing as:
[TABLE]______E___F___G___H
10__1223 122 2222 2222
11__343 565 4554 5990
12__9755 334 6787 6788[/TABLE]
It is better for me if the data appears like this:
[TABLE]_____E____F____G____H
____1223 122 2222 2222, 343
10__565 4554 5990, 9755 334
____6787 6788
[/TABLE]
Is this even possible using a macro? It is currently being done using a Word document but I am wanting to automate the process and try to handle all the data sorting within Excel, if possible.
Sub Number()
Dim colSearch As Range
Dim celVal As Range
Dim celRow As Range
With Sheets("Sheet1")
I have a sheet of data that I can filter (e.g. only show male pupils).
On the next sheet I want to display the list of filtered results with no gaps.
As the user will be able to select which column of data to show from the first sheet I am referencing it as follows:
INDIRECT("'Progress Matrix'!"&ADDRESS(MATCH($B$6, 'Progress Matrix'!$A:$A, 0)+1,
MATCH(C$6, 'Progress Matrix'!$1:$1, 0))&":"&ADDRESS(300, MATCH(C$6, 'Progress Matrix'!$1:$1, 0))))
(However this formula no longer seems to work as I think I changed something).
I've tried to incorporate
SUBTOTAL(3,OFFSET(A2,ROW(A2:A100)-ROW(A2),0))
to only show filtered results but with no success.
Progress Tracker.xlsm
Excel 2010 windows 8
I am in need of a formula to count filtered results. On Sheet1 (Job Flow) the user enters data continually . The most important is the Date in column D some measurements in columns N,O & P that gives a result as a code, example s15020 or c3005 in column Q. A vlookup is then pulls up a price for the code.
On sheet two Column A There is a list of all the codes. I need a formula that will give a count in column B for the amount of codes that was entered in to the data base "sold" for a date filtered time period, be it a week, month or year. In other words the codes in ,column A sheet 2, should reflect the amount of units for the time filter on page1.
Use filter for 2 columns of a CSV file, column A and Column B for certain words. Say I apply a text filter: contains "word1" or contains "word2" to Column A. Then I get the results. After that, I remove the filter to Column A then apply the same filter to Column B. The thing is, I don't get the results in Column B, instead, I get the cells in Column A wherein Column B is filtered PHOTOS BELOW:
The data that I get for this filter are:
And Word1 you
Word2 is blank
Apply filter to Column B, get the cells filtered in Column A:
The data that get for this filter are from Column A (which are cells filtered from Column B filter)
And Word1 you
Is the blah
Word is all
The results should in a single Column for both filter:
I have more than 100 files that needs to filtered this way, is there any way I can do this automatically?
Here is what the file looks like:
The results I hope would be possible:
Automatically without having to open all the files and have the results of all of it in 1 single Excel file?
----or----
If the above is not possible, open each file and automatically apply the filter into a column in just 1 click and without having to type the same filter for each column.
I found a code to combine all CSV files into 1 Excel file, but half of my files has more than 500k rows and the Excel's limit for rows is around 1million+.
I have a long list of delegates attending functions on different dates and need help with 2 problems:
A) List has filters by date/venue etc but I will want the table to be visible even when list is filtered.
B) I am using the following formula to count "=SUMPRODUCT(--($E$3:$E$728="Thursday 3rd September 2009"),SUBTOTAL(3,OFFSET($E$3,ROW($E$3:$E728)-MIN(ROW($E$3:$E$728)),,1)))" and this works but if I filter to another date then 3rd September shows 0.
I am a Microsoft Excel 2010 user and am trying to create a usage report for a website that I work on. I have been compiling the usage reports into one spreadsheet. The columns I use are Month, Device, Language, Title 1, and Title 2. I can filter each of these rows and it shows me the number of records found. Each row on this spread sheet refers to a time that someone selected something on the site. For example the row may say;
Month (filtered)
Device (Filtered)
Lan (filtered)
[Code].....
How do I automatically populate a table on a separate sheet with the number of records found for a certain combination of filters applied. So if I'm looking at monthly trending I want to know how many times the stress test was started in May, June, or July, but automatically using info from the multiple filters.
What is a formula I can use to compile the filtered data from above.
Jan
Feb
Mar
Aprl
May
Start
=formula?
I'm using Excel 2010. I have a spread sheet with sales data covering 3 years and multiple customers. I was able to create formulas such as this to calculate the figures for the entire sheet (all customers) by year.
=SUMIFS(J2:J12904,E2:E12904,">12/31/11",E2:E12904,"<1/1/13").
I believe that in order to use filters that show this date for a specific customer I need to convert this to a SUMPRODUCT formula, I've tried this multiple times and had no luck.
I have made a pivot table and I dlike to identify with a macro the documents with net value over 1000. Then extract these values next to the respective sales documents in an are near the pivot table somewhere. The fields are called Document and Sum of Net value. Of course the pivot is very variable one time it has 3000 records and another 5000.
View 9 Replies View RelatedThe following sub will look in the file ("FY09 SOF"), in column "A", search for the strings that begin with "2109", "3009", or ends in "-1", and copy the entire row. It will then paste these in the file ("FY09 PR Log Blank").
I have found that in the file ("FY09 SOF"), if things are filtered in any row, it will not copy those necessary items.
The data filter is on row 13 of each sheet. Is there a way of fixing this? (i.e. having the macros select "all" on the filter before copying the sheet? There are 60 sheets so a macros will be necessary.
Sub get_data()
Dim wb As Workbook, wbDest As Workbook
Dim ws As Worksheet, wsDest As Worksheet
Dim lngCalc As Long
Dim FoundCells As Range
Dim FoundCell As Range
Set wb = Workbooks("FY09 SOF")
Set wbDest = Workbooks("FY09 PR Log Blank")
Set wsDest = wbDest.Worksheets("Paste all here, then sort")
With Application
.ScreenUpdating = False
lngCalc = .Calculation
.Calculation = xlCalculationManual
End With
For Each ws In wb.Worksheets.............................
I am trying to figure out if it is possible to retrive the list of filter criteria in each filter of the filters collection using VBA. I could trawl through the data and retrive a unique list but I think it would take longer than if I could use what is already there.
I intend to use the list in a combo box elsewhere in the workbook......it's all to stop inquisitive little users accidently changing data and whining that thier figures are misteriously wrong.....
I am using the following code to select rows in a filter.
Selection.AutoFilter Field:=Worksheets(" Dashboard"). Range("G1"), Criteria1:=Worksheets("Dashboard").Range("H1")
This code runs when I click a command button on a userform.
When I load the userform up again I want to clear off the previous filter before I filter again as there are 4 columns which have filters on.
I have tried using ActiveSheet.ShowAllData before filtering again but this code falls over if there isn't a filter already on.
I have this code below which autofilters a range and selects the data i need, there is also a small offset part that leaves the active cell as the one in the top lef of the needed data. I also have the row count of the data in cell G1. What I need to do is something along the lines of:
View 3 Replies View RelatedI have searched these boards (and found wonderful ideas), but can't find a better solution.
Is there a quick way to clear all the autofilters on a page (or all of them in 1 row)?
I am using this code, but it is very slow.
For i = 1 To 21
Selection.autofilter Field:=i
Next i
I have an issue where users to a work book are selecting autofilter and then saving the document with rows filtered out, which I wish to prevent or at least warn them to remove the filter before allowing the save function.
The document is never 'Save As', it's always 'Save' from the toolbar icon.
They should be permitted to save the document, but only after this check has been completed and a message issued if the filter is on.