Clear/Delete Cells Meeting A Date Criteria
Oct 1, 2006
i created a work sheet with the help of the wonderful people on this forum. my boss loved it! one problem they now want it to automaticly take out a date and time of the cells when the date rolls around again.
example:
12/25/05 late 00:20:06 when 12/25/06 rolls around they want the system to automaticly see it and delete it out with the amount of time they were late or sick ect.... or if the sup was out that day and comes in the next day the system will see that the date has past and will up date the info. the other catch is i need it to move everything up one space when it deletes somthing. i want it to read j18 and k18 as one and so through j and k 40 same for l and m n and o ect.... i attached the sheet
View 9 Replies
ADVERTISEMENT
Nov 1, 2006
I would like to seek help on how to delete a cell that has data in it and that has colourfill. E.g. Cell A1 shows "Occupied" and Cell A1 has a blue colour fill.
Need help on how to delete that cell's data and remove the blue colour without having to manually do so.
View 4 Replies
View Related
Dec 13, 2006
In my code I am searching a spreadsheet for certain states and deleting rows that have states I want to exclude. Is there a way to do this with a list of states, instead of having to make many for loops?
For i = lastrow To 2 Step -1
Cells(i, 4).Select
If Cells(i, 4).Value = "PA" Then
Rows(i).Select
Selection.ClearContents
End If
On Error Resume Next
Next
For i = lastrow To 2 Step -1
Cells(i, 4).Select
If Cells(i, 4).Value = "TX" Then
Rows(i).Select
Selection.ClearContents
End If
On Error Resume Next
Next
View 5 Replies
View Related
Jun 23, 2008
I want to count no of "yes" in Range Column B only if corresponding values in column A is less than 10/06/2008
Please see the attached file for refrence
View 5 Replies
View Related
Jun 4, 2009
I have a large number of user inputs which is linked to a data sheet. In this sheet are rows to be kept and rows to be deleted. See attached example...
I need code to delete all other similar rows than the one with a number (1) in the field Complete. There can only be a number (1) in the field Complete in one of the rows.
But if there is no number (1) in the field Complete in any of the rows, no rows should be deleted.
The data sheet is to be transferred to Access afterwards.
View 3 Replies
View Related
Feb 2, 2010
Broken off from:Delete Rows Meeting Criteria
Thats for that, the sheet in the workbook is called Ticket Handling and if i try to change the name in the VBA code it will not accept this.
It Displays the following error:
Compile Error:
Expected: End of Statment
View 8 Replies
View Related
Aug 20, 2007
I need a macro to sort through a large table of data entries and remove all repetitive entries (entires are based on a number in column A with data entries in B through EY) so i need to locate repetive numbers select entire row and paste them in a new location.
But i cant sort the data as it will change the entire order and i need the data intact.
the user will specify which entry number to search for.
I know some sort of search and loop function would work but i just cant seem to make them work.
View 9 Replies
View Related
Nov 21, 2007
Excel Range A1 - D500. Data located in column C. I would like to delete the rows in this spread sheet that do not contain any of the following 3 prefixes of part numbers from column C: X-SXP, X-SCM and X-SBP. There are many part numbers but only parts with these 3 prefixes are needed. Part numbers are 10 characters long after the prefix. If any additional information is needed, let me know.
I viewed the Delete Rows Meeting Conditions thread, but the input value in that code is for what you want to delete, and I need to delete everything not meeting the data I want to keep, which is about 30 different part numbers. Also, that appeared to only offer one input and not 3.
View 3 Replies
View Related
Feb 29, 2008
I have an extremely large CSV file that I am opening via Excel. Can anyone tell me how to delete a row using multiple criteria. For Example, i want to delete the whole row if a certain cell doesnt equal GA SC or NC. I have seen how it can be done using one criteria but not multiple ones.
View 8 Replies
View Related
Aug 11, 2008
I have searched for this topic, and I have read http://www.ozgrid.com/VBA/row-delete-criteria.htm, I don't really understand it though. I think what I want is simple, I want to search column A for cells containing the word " Total" - if any are found I then want to delete the corresponding rows.
View 2 Replies
View Related
Nov 6, 2009
On the attached file, I would like the values from the Transactions worksheet to show up in the appropriate cells in the XYZ Expenses worksheet. The catch is, I would like the XYZ Expenses worksheet to only show the values from the past week. Past week could be literally, but I'm guessing that might not be possible and it would have to use the past week from the most recent transaction date - which would be fine. So if it worked right, XYZ Expenses > F7 would show -$80, which would be from Transactions H3+H6 (and not -$130, from Transactions H3+H6+H9).
View 3 Replies
View Related
Sep 30, 2007
I cannot get my head around this loop, it has been a while since I did anything in VBA and am stuck. I have a list of trades on one sheet, would like to create a column that lists open trades as of that calendar day. Using Sheet(balance) column A as date range. What I am trying to do is test for condition if opening day is less than calendar day AND closing day is more than calendar day...then that trade is effectively open as of that calendar day...so would like to copy it with that calendar day in front of it.
Loop through sheet x and copy all that meet above criteria. Next calendar day, loop through all trades on sheet(x) again and copy etc...here is what I have so far, but I am afraid it is useless...
View 9 Replies
View Related
Feb 18, 2008
I've inherited a reporting process which I need to convert to Excel but my knowledge of excel functions is fairly limited. I've attached a sample worksheet which sets out exactly what I'm trying to achieve in the comments. However to summarize here I need to add the data which meets set criteria together and display the result on a different worksheet. The problem I'm having is that the "criteria" the data needs to meet is dependent on info from other cells.
For example I only the totals of the data in column D where the date in column A is 01/01/08 and the data in column E is 1 and the result is to be displayed on a separate worksheet if that makes sense. It's difficult to describe without seeing the example workbook.
View 3 Replies
View Related
Apr 4, 2008
I have a macro that hides rows in my workbook if certain criterias are met. I'd like to add a criteria to the logic that only hides rows if the date in cell 17 is less than 3 months from today's date. The date in cell 17 is shown in this format: 25-03-2008.
Sub ForceHide()
Dim ws As Worksheet
Dim line As Integer
Dim Endline As Long
For Each ws In Worksheets
If ws.Name <> " Total" And ws.Name <> "Batch" And ws.Name <> "Summary" And ws.Name <> "PivotTable" And ws.Name <> "Fields" And ws.Name <> "RTP" Then
With ws........................
View 3 Replies
View Related
Feb 28, 2008
I'm trying to do a sumif based a range of dates but keep getting a "-" for the result.
In the past when using dates I've had to value the dates in order for it to work. I can't seem to figure out the formula this time around - any thoughts? See attached for sample - my 'broken' formula is in cell C29.
View 4 Replies
View Related
Feb 26, 2008
I would like to setup a macro that brings up a dialog box asking for a date in a specific column. Once that date is entered in the dialog box, the macro would then find all rows before that date (in that specfic column) and delete them.
View 9 Replies
View Related
Nov 12, 2012
I'm doing an assignment. This would be very simple w/ filters but I have to do it thru formulas.
I have a bunch of rows w/ various hotels. Row 14 is Rolling Meadows, Row 15 is Lakeview Apartments etc.
Near the top I have to add the number of times Rolling Meadows is mentioned, in the cell below Lakeview apartments, etc.
I tried a sumif formula but that doesnt work. How would you do this? This is what I wrote, I got 0
=SUMIF(B14:B26,"Rolling Meadows")
That's part 1. In part 2 I have to calculate the number of units in that building that are occupied.
View 9 Replies
View Related
Aug 9, 2007
I have an Excel sheet with 3 worksheets. On the first sheet I want to enter a formula that will check the third sheet. On the third sheet I need to compare all the entries in column N with a value in Cell B2 of the front sheet. If these match then I need the formula to add up the relevant values in column N. (column N has a 4 letter code, I am only interested in comparing the first letter, as such the value in cell B2 is H*, then in column U it has numbers of minutes, I want a total of the minutes of all those entries with a code that begins with H)
View 4 Replies
View Related
Aug 24, 2007
I have a table with characters in the cells (QC, PS and PK) - it is an employee scheduling table - to the far right on the table, I want to summarize the employee's hours by each type - each character (QC, PS and PK) represent 1/2 hour - i cannot figure out how to do this
View 5 Replies
View Related
Sep 5, 2006
got a problem with a little piece of code witch need to check something and if its true then its has to do 1 and they i need another if... just look at the code :P
Sub Bevestig3()
Dim Msg, Style, Title, Help, Ctxt, Nadenken, bevestigmsg, MyString
Msg = "Heeft u alles goed ingevuld?" ' Definieert bericht.
Style = vbYesNo + vbDefaultButton2 ' Definieert knoppen.
Title = "Doorgaan?" ' Definieert titel.
Help = "DEMO.HLP" ' Definieert Help-bestand.
Ctxt = 1000 ' Definieert onderwerp
Nadenken = "test"
ActiveSheet. Unprotect Password:=Nadenken
bevestigmsg = MsgBox(Msg, Style, Title, Help, Ctxt)
If bevestigmsg = vbYes Then...................
View 8 Replies
View Related
Sep 8, 2006
I have a data sheet which has a number of columns
I am only interested in one of the column which is 'Type'. Within this column it specifies the type of order it is. I would like to count through the sheet and get a final count of the different order types on the other sheet, so if there are 56 instances of 'trace' orders then I would like this displaying on the other sheet as Trace = 56, and so on
View 9 Replies
View Related
May 7, 2007
We are trying to list only certain cells that have a specific conditional format- this is so we can copy them to another sheet
A filter does not really work for us since we have over 5 columns to search on and over 800 records
This is how excel says to find cells that have a conditional formatting (for example the scores are red because the student scored between 350 and 370: I tried it and it doesn't work--but maybe that is not how it is suppose to work?
To find cells that have conditional formatting settings identical to the settings of a specific cell, click the specific cell.
On the Edit menu, click Go To.
Click Special.
Click Conditional formats.
Do one of the following:
To find cells with any conditional formatting, click All below Data validation.
To find cells with identical conditional formats, click Same below Data validation.
View 4 Replies
View Related
Dec 21, 2007
i want to copy one coulmn from one sheet to another if cells in another column satisfy a criteria.
View 3 Replies
View Related
Jan 15, 2008
I have what I thought would be a simple task, but after almost a day of searching this and other sites, I've gotten no where. I have two issues that are similar. First, I need to edit my VBA code to count the number of blank cells in a column. Here's the code I'm starting with...
View 3 Replies
View Related
Apr 1, 2008
Well, after reading "Best Practices", it looks like I've got lots to learn about Excel and VBA Hope I don't break too many rules. see code below. I have a form that uses a set of dynamically filled combo boxes. The difficulty I'm having is in filling the combo boxes with correct data when updating an existing record. As per the code below, the Activecell. offset(0, #) references in the "if" statement in the For..Next loop process correctly, but Activecell references that fill the combo boxes seem to behave like an absolute references to Row 1, which are the Column Names. I've tried creating an Activecell.offset(0, 0) before every fill combo box statement and then using Activecell.offset(i, #) to reference the relevant cells, but to no avail. Obviously, I'm missing something here...
Private Sub cboUserName_change()
Dim usrnam As String
Dim found As Boolean
Dim i As Integer
Dim intRowCount As Integer
usrnam = cboUserName.Value
found = False
If usrnam <> "" Then
ActiveWorkbook.Sheets("Data").Activate
Range("A1").Select
intRowCount = Range("A1"). CurrentRegion.Rows.Count - 1 ................
View 2 Replies
View Related
Aug 13, 2007
I am trying to count the number of times a code appears in column N, IF the corresponding cell on column T is blank. Column T either has a date or is blank and column N has a 4 letter code.
This is what i have been trying.
=SUMPRODUCT((CMRF!T:T=ISBLANK)*(CMRF!N:N="B2"))
I want the code in column N to match to the code currently in cell B2, i have also tried using "" instead of ISBLANK but i get # NUM! error as a result either way. the result should just be a number i.e. 400 (cells with the same code as B2 and no date in cell T)
View 9 Replies
View Related
Jul 19, 2012
I have a gantt chart that was built in excel. I need to shade cells in the timeline based on persons title under each project.
I can provide a snip of what the layout looks like for a better visual. I want the PM's Green, Supers Yellow and Persons Reporting Orange.
To get the green bar shown is using formula: =SEARCH("Project Management",$E17) , The issue with this is it fails to consider the start finish dates. For this particular project it works but when the formatting is "dragged down" the issue arises.
View 9 Replies
View Related
Aug 25, 2009
I need to be able to get a macro to do this. I recorded the macro. The conditional worked, but when I cleared it and then ran the macro, it highlighted all of the wrong stuff. Here is what I want to do: In column(AJ) I have cities with Prefixes or not In another column (AV) I have Criteria1 and in yet another, I have criteria2 (CB)
City
(AJ) Criteria1 Criteria2
SCRNRTH_SCRM1 FALSETRUE should fail test
A9_SCRNRTH_SCRM1FALSETRUE
A9_SCRNRTH_SCRM1FALSETRUE
A9_SCRNRTH_SCRM1FALSEFALSE should fail test
SCRNRTH_SCRM1 TRUETRUE should fail test
A9_SCRNRTH_SCRM1FALSETRUE
SCRNRTH_SCRM1 FALSEFALSE
A9_SCRNRTH_SCRM1FALSEFALSE should fail test
A9_SCRNRTH_SCRM1FALSEFALSE should fail test
A9_SCRNRTH_SCRM1TRUETRUE should fail test
A9_SCRNRTH_SCRM1FALSETRUE....................
View 6 Replies
View Related
Jul 31, 2007
Im trying to make life easier by setting up some sort of macro function that will clear the contents of all the cells except for the ones that have formulas in them.
I don't want to delete the 1st row as it contains the titles for each column.
View 9 Replies
View Related
Jun 19, 2008
I am trying to write a macro to find all cells that are returning cell errors (ie: #REF!) within a named range, to select only those cells, and then to clear the contents of only these cells. It is my understanding that replacing or altering the value is not an option because doing so will return a "" string value, instead of a clear cell. Replacing the cell's contents with a =na() is also unacceptable...these cells to be completely clear. I was unable to piece together a macro from searching around this site and thought it would be best to just ask.
View 4 Replies
View Related
