Copy/paste Code ....
Nov 1, 2009
I have two files and need to copy the information from columns B,C,F,H rows 5 true 29, and past it in the other file in Columns B,D,G,J; rows 3 true 35.
The code that I have works fine, but have one problem - it past the info in the rows starting from 37 instead from row 3. Here is where I need your help. The code is triggered when the condition Arr ( arrived) is chosen in the column AH ( file Delivery Status) and then the specific warehouse is chosen in the column AI. To make it easy I have left only one warehouse as a choice.
Attached you can find sample files ( I have delete the info from the heading cells as it was in another lenguage)
View 14 Replies
ADVERTISEMENT
Nov 9, 2009
I need a little look on a Copy Paste Code, as bellow:
View 3 Replies
View Related
Dec 4, 2009
I created this spreadsheet a few montsh ago to help with forecasting for my companies products. The tabs of interest are the HIST vs FORECAST, FORECAST TOOLKIT, and the FORECAST TABLE tab – now the FORECAST TABLE tab is always hidden and if you unhide it then it will rehide itself once one of the macro’s is run. I set it that way to prevent people accidently making adjustments to the forecast data.
The way the sheet is supposed to run is that when you are on the hist vs forecast page then you can click one of the grey buttons on the right which will then graph the numbers for the relevant product on the toolkit page – so far so good, this bit all works fine, there are separate macro’s for this each named after the product they control.
Then once you are on the toolkit you can play about with the numbers until you come up with a 6 month forecast you are happy with which will be on the 6 cell line in the bottom right were it says “ IMPORT”. You can then click on the “IMPORT” button which will then copy and paste it back into the forecast table under the relevant setting – the macro for this is called IMPORT2 and it works off a “product” range and a “ date” range – again this pretty much works as intended.
Sub IMPORT2()
Dim nDate, nProd
With Sheets("Forecast Toolkit")
nDate = Application.Match(.Range("O31"), Range("Dates")) + Range("Dates")(1).Row - 1
nProd = Application.Match(.Range("I3"), Range("Products")) + Range("Dates")(1).Column...........................
View 5 Replies
View Related
May 12, 2008
I'm using code that SHG provided for me here; http://www.excelforum.com/excel-programming/630464-sheet-macro-for-preventing-paste-not-working.html
It worked great in the first workbook I set up but I just set up a new workbook and it's not doing the same thing. For example, it allows me to copy items from column A which have 1 type of validation (restriction on text) to another column which has a formula validation.
It still won't allow me to paste from outside a validated range to inside but I need to prevent people from screwing up the validation between columns.
View 13 Replies
View Related
Mar 8, 2013
I have the following bit of VBA code which copies a particular cell and pastes it in the next available cell in column "AD", but I need to paste it as a value. How do I incorporate this into the code?
Sub copypaste()
Worksheets("USD IR Swap 10 Yr").Range("L5").Copy _
Destination:=Worksheets("USD IR Swap 10 Yr").Cells(Worksheets("USD IR Swap 10 Yr")
.Rows.Count, "AD").End(xlUp).Offset(1, 0)
End Sub
View 5 Replies
View Related
Mar 14, 2013
I am looking for VBA code that will select a data validation cell, copy the selection, and paste the value of that cell in a different worksheet.
The data validation list is in cell L47. The user will select a date from cell D31, type a description of activities in the adjacent column and then select initials from the aforementioned validation list in cell L47. I need the code to fit into a button I created so that when they click it to approve the activity, the code will copy the value of the initials and paste it into column AB in a separate worksheet. Column AB runs parallel to column A, which contains all of the dates located on Sheet1 in cell D31. I think I might need some sort of loop to run this so that it pastes initials on the correct date.
View 3 Replies
View Related
Apr 14, 2013
I have a shape called "Company Logo". Code to copy the shape from sheet 1 and paste to sheet 2?
(I tried macro record but had trouble when I pasted it into another macro).
View 4 Replies
View Related
Sep 18, 2007
I want to automate the transferring of specific pieces of data from one spreadsheet into another spreadsheet. There are many project spreadsheets that all feed into a resource plan spreadsheet showing every employee, what projects each of them are on, and how many hours they are spending on each project for the quarter.
Now what I would like to do is to automate this process of feeding the data from the many project spreadsheets into the resource plan spreadsheet. With transferring the specific data from the one to the other. Basically I need it so that excel looks at the project spreadsheet copies the name of the employee and the hours they have worked each week for the quarter and paste It into the big resource plan. What I am finding tricky is knowing how to make it automatically paste into the right area as in copy an employee and paste the details in the same employees cells in the other spreadsheet.
View 2 Replies
View Related
Apr 26, 2014
I have 4-5 worksheets (sheet1,sheet2,etc) on a workbook. All of the rows except for the ones that are filled in are currently HIDDEN.
I have one worksheet called "Add record" which has a VBA code that adds a record to any of these sheets.
When it does this I want it to recognise when pasting the new record into any fo the sheets.. IF the row is hidden, the sheet needs to reveal that row.
I'm desperate trying to get this to work!!
Here is the code I have so far! This is a command button macro used in the "Add Record Sheet" I have FOUR different versions of this code. Each one adds the data to a specific sheet.
[Code] .....
View 1 Replies
View Related
Apr 4, 2009
The code opens a varying workbook with the same format as the source workbook and copies specific columns into the source workbook.
It is currently taking about 20seconds to run.
The worksheets are protected and have merged cells hence the call TestMe line.
View 13 Replies
View Related
Jan 25, 2010
I would like a code which looks on the worksheet “Racks” and if Column A is "Y" then copy the entire row and paste it on the to sheet “Summary Racks”. I would need it to then find the next instance and then continue to copy and paste. I have attached the file I am currently working on.
View 4 Replies
View Related
Apr 13, 2012
I have this code that copy/pastes a range from another sheet for every nth row. In the code I have pasted cells I need to merge the cell with the cell to the right and format it. I thought I was doing ok but the code keeps returning an error (run-time 1004) and I don't know the solution, it is beyond my level of VBA.
Code:
Sub test()
Dim ws1 As Worksheet
Dim ws2 As Worksheet
Dim lngRowCounter As Long
Dim newRowCounter As Long
[Code] ...
The code in red is the problem and I have commented it out so it can run, but I need it to merge and format. I don't know how to address range/cells in column B and C together (they are the two cells I wish to merge and format).
View 2 Replies
View Related
Jul 11, 2007
I use for another template and it works fine. Only change I would like to make is the column headers starts in Row 4. Col B. Some how this is not working for me.
Sub ITD_REV()
Application.ScreenUpdating = False
With Sheets("Data").Rows("1:1")
Set c = .Find("CONTRACT #", LookIn:=xlValues)
If Not c Is Nothing Then
FirstAddress = c.Address
Do
c.EntireColumn.Copy
Sheets("Test1").Select
Range("B3").Insert shift:=xlRight
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address FirstAddress
End If
End With
End Sub
Again...incase what I said does not make sense: I want to copy certain columns with fixed header names, e.g. "CONTRACT #" into another sheet name "Test1" and paste starting into cell B3. Another column would be "Contract Name" and so on. Also, these col header names may not be in order. In "Data" sheet, col header names starts in row 4.
View 9 Replies
View Related
May 12, 2008
I am building a large macro to filter/manipulate/format/organize data pasted into a Data Dump tab.
I am a VBA novice, and I recycled some code for a portion of the macro from infomation found on this board. I just discovered that my copy/paste section is ignoring the last row of data, which is a problem ....
View 9 Replies
View Related
Feb 22, 2007
1. Alphabetize the worksheets that have a red tab color. The number of worksheets with a red tab color will vary from time to time.
2. All worksheets with a red tab color are formatted the same. I would like to copy the same range of cells (AP5:BP9) on all n number of worksheets with a red tab color to a worksheet labeled "Posting". Also, since AP5:BP9 are cells with formulas and formatting, the ranges need to be copied with formats and value and number formats. The first copied range needs to be on line 8 on the Posting worksheet, the second range to start on line 15, etc.
3. Last, but not really last, I would like to start the code with deleting whatever is currently on the Posting worksheet starting at line 8.
I have attached a small sample. The sample does not reference the same range as above on the worksheets with a red tab color, nor does it contain the formulas and formatting.
View 3 Replies
View Related
Aug 11, 2014
I think I have a very straight forward problem, I'm copying about 400 values from one workbook to another (from vertical range to horizontal range) and I currently have about 400 lines of code in order to do this. Below I've pasted the code I'm using now but the macro takes an estimated 30 seconds to run. I figure if I can reduce the number of lines the macro will run a lot faster
RowCount = openWb.Sheets("Library Raw Shear Rates").Range("A3").CurrentRegion.Rows.Count
With openWb.Sheets("Library Raw Shear Rates").Range("A3")
[Code]......
View 3 Replies
View Related
May 21, 2009
I have two sheets - sheet1 and sheet2. Everytime i run a macro in the sheet1and manually copy the rows from sheet1 {starting (A2:AI2)} and paste as values it in the sheet2 {starting (A2:AI2)}.
Then I ll delete the available datas in the sheet1 and will run a macro for different customer.
Again I need to repeat the same action (manually copy and paste the datas to sheet2) without replacing the existing data in the sheet1.
In simple I require a macro code where it copy the available information in sheet1 and paste it as values in the sheet2 without replacing the existing one.
View 14 Replies
View Related
Oct 11, 2013
writing a code where i can copy a worksheet (Sheet1), insert a new worksheet at the END (as the last worksheet), and paste to that new worksheet (which will have a different name each time a new one is added). I am using the code below, but it adds a worksheet after Sheet1 instead of at the end, and it also adds another weird worksheet that says "Dim Worksheet" in one cell, and "Set newsheet = Sheets.Add(After:=Sheets(Worksheets.Count), Count:=1, Type:=xlWorksheet)" in another. This is not in the VBA window, it is just text in a cell in another inserted worksheet. I only want one worksheet added at the end that I can paste too (knowing that the inserted sheets will always have new names).
Code:
Sub CreatePercentageSheet()
ActiveWorkbook.Sheets("Sheet1").Copy _
After:=ActiveWorkbook.Sheets("Sheet1")
ActiveWorkbook.Sheets.Add After:=Worksheets(Worksheets.Count)
ActiveSheet.Paste
End Sub
View 2 Replies
View Related
Oct 29, 2008
i need a code to open a specific word document, copy table from word into excel with a link so when the word document is changed so is the excel doc
View 9 Replies
View Related
Apr 1, 2008
how to unprotect the sheets in order to be able copying datas to to certain cells.
The unprotection works but only when I start the macro the second time. I do not understand why.
After I did the updates I want to reprotect the sheets but that seems not to work in my case.
ActiveSheet.Unprotect Password:="my_password_here"
'unprotect the sheet
ActiveSheet.Protect DrawingObjects:=True, _
Contents:=True, Scenarios:=True, Password:="my_password_here"
' Reprotect the Sheet
View 7 Replies
View Related
Aug 13, 2014
Is it possible to modify the attached code so that it will copy bold text and border as shown in attachment sample1 and paste in sheet Shop. Currently the code just copy's and pastes without bold text and borders.
Sample1.PNG
View 4 Replies
View Related
Oct 22, 2008
I have recorded a macro to filter data on sheet 'To Invoice' copy the filtered list, and paste on sheet 'Invoice' in C16.
The code just keeps looping (not looping in a code sense, it just seems to keep flickering the screen like its going over & over) until it locks up 5-10 seconds-ish and then I have to re-start Excel.
The range B2:E22 is not always populated, it could possibly be B2:E2 (one row), I dont know how to copy the exact data so I expanded the range to what I think would capture any eventuality....
View 9 Replies
View Related
Jul 8, 2009
i have a button that copies data from cell
A5:K5, and pastes it in Sheet2 of my workbook.
The data is ordered like this
------
------
------ button1
------
------
------ button2
------
------
------ buttonX
I have like 40 buttons attached to 4 rows each. And in that group of rows, i have some cells with an IF= formula, and some minor coding.
The problem is: If i press button 3,4,17,29 before i press every other button before that. I get an reference code fail at the cell.
If i press the buttons in order. Like 1,2,3,4,5,6,7 - it appears smoothly.
More info: The button copies data from for example A5:K5 and pastes it into the next blank row of sheet2. But i want to be able to press button 2 before i press button1, without getting an error in my =IF cell.
If i press the 40 buttons in a row, and then starts to mix up the button pressing. It appears smoothly.
View 9 Replies
View Related
Aug 6, 2012
I am attempting to navigate to a webpage using IE. I have been successful at getting to the appropriate webpage.
However, I would like to open a link within the webpage in the browser in another window(Which is an image). Copy the image then paste it back into excel. I have been successful at opening the webpage using a Userform.
Code:
Sub Anthro()
Application.ScreenUpdating = False
Set ie = CreateObject("InternetExplorer.Application")
With ie
.Visible = True
[Code] .......
The user input number for example:
If the user inputs the number 25423310 into the txtbox then it navigates to a certain webpage.
On this webpage and all other webpages where different #'s are used are very similar. The number (25423310) is always used to identify an image. However it has more characters. For example the image is always on line 30 of the HTML code. On this example the HTML code lists the image as:
The number used in the txtbox to naviagete to the URL Ex: 25423310) is always within line 30 of code in HTML. Is it possible to run a query or parse this line of code and direct ie to open this image in a new window then copy and paste it based on the criteria of the user input? Ex. 25423310?
Code:
Sub PropInfo()
Dim appIE As SHDocVw.InternetExplorer
Set appIE = New SHDocVw.InternetExplorer
Dim varTables, varTable
[Code] ....
View 9 Replies
View Related
Dec 7, 2011
I have a spreadsheet and I was wondering if there is a way to copy from a specific range in say A1:A5 in Sheet1 and paste into Sheet2 where the column matches cell A1 in Sheet1.
I am trying to do this in VBA and I was wondering if there is a way to do this.
View 9 Replies
View Related
Mar 29, 2009
I'm using 2003.
1. Copy cells B5 to V-First blank row in Strength Tests worksheet
2. Paste cells into Racks worksheet in cell C5
3. Change font size to 6
4. Sort by Column T descending then by Column C ascending
5. Copy one row (A5-W5 (1Rx23C)) from Racks worksheet
6. Paste row into M1 worksheet in cell D4
7. Print M1
8. Drop down one row on the Racks worksheet
9. Repeat steps 5-8 until there's a blank row.
View 9 Replies
View Related
Jul 30, 2013
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies
View Related
Feb 23, 2010
I've tried to change the line highlighted in red to 'Sheets("Financial Accounts").Pastespecial After:=Sheets("changes")' but the macro crashes.
Sub ConsolidatedTotals()
Dim BeforeSheetName, NextPageName As String
BeforeSheetName = "changes"
NextPageName = "Financial Accounts - " & Worksheets("assumptions").Range("c3")
Worksheets(ActiveSheet.Name).Select
Sheets("Financial Accounts").Copy After:=Sheets("changes")
ActiveSheet.Name = NextPageName
End Sub
View 9 Replies
View Related
Mar 20, 2007
I got this code the other day
Private Sub CommandButton11_Click()
Sheets("Invoice Page").Select
Rm = 3
For c = 1 To 5
Rm = Application.WorksheetFunction.Max( Cells(1000, c).End(xlUp).Row, Rm)
Next c
Range(Cells(3, 1), Cells(Rm, 5)).Select
Selection.Copy
Sheets(" Records Page").Select
c = Cells(3, 256).End(xlToLeft).Column + 2
Cells(3, c).Select
ActiveSheet.Paste
Application.CutCopyMode = False
End Sub
And instead of pasting the cells i want it to paste speical so it just pastes values rather than formulas.
View 5 Replies
View Related
Feb 3, 2012
This macro works fine on my machine but not with other users:
This should copy/paste certain cells then paste 3 sheets into a new work book.
ON other computers it seems to paste in a picture? works OK for me?
Sub ValidationTests()
'
' ValidationTests Macro
' Macro recorded 21/12/2011 by '
'
Sheets("Score Sheet").Select
Range("A8:M18").Select
Range("H18").Activate
Selection.Copy
[Code] ..........
View 1 Replies
View Related
