I have a large formula written in my VBA code (a sumproduct with numerous variables) which exceeds the line length in VBA and therefore a proportion of the code is shown on the next line.
However, the VBA treats this second line as an error (since it sees it as a new line of code which on its own doesnt work) What do I need to do so that it treats the two lines as a single line of code?
Suppose I have in A1, names of people seperated by comma....
James Dean, Bruce Lee, Marilyn Monroe, Tom Cruise, etc
How do I break them into rows like
James Dean
Bruce Lee
Marilyn Monroe
Tom Cruise
A database spits out a 42-column (A-AP) and 3,000+ row csv sheet of raw data with column headers. Frequently (due to improperly inputted information), there is a random line break in the middle of a cell, resulting in data that should be in columns Q (or R or S) - AP winding up in columns A thru Y (or Z or AA).
The only data that is consistent is in column AC.
Basically, I need to delete any blank rows and pull the incorrectly wrapped data up to complete the row where the split occurred.
Upon examination of the csv file in Word, there are instances of improperly placed paragraph marks (^p), which can easily be searched and replaced—in Word (by replacing each column A data with a unique character and the same data, deleting all paragraph marks and then replacing the unique character with a ^p.
Firstly, I'm not sure how to accomplish this same task in Excel and secondly, doing so brings the data into the proper rows but it doesn't fix the varying number of blank cells. Simply deleting blanks and shifting left doesn't work because the split often occurs in the middle of a cell which would require concatenating. But I would be ok deleting the latter part of the data so the columns align if need be.
In the attached example sheet, I highlighted the relevant data and what needs to be aligned. There is an ideal and an acceptable version in addition to the initial way the csv imports.
Example.xlsx‎
i hv following code
(i use generate macro)
my question is how to arrange the code from one line to multiple like :-
following code show in excel macro environment is one striaght line.
' Create new var on yr , and replace 2006 to CY06.
ActiveCell.FormulaR1C1 = _
I've written a piece of code that is so long, I have to use the scroll bar to see the whole of it, which isn't very user friendly
if there's a way of splitting long lines of code over say 2 or 3 lines, so I can read the whole thing without having to use the scroll bar? I've noticed some people use _ at the end of the code and then continue writing on the next line, but when I do this, I get an error message saying
"Compile Error : Expected : line number or label or statement or end of statement"
I have following coding: ....
View 9 Replies View RelatedI have an excel sheet that I am importing to my network software. One of the columns lists telephone numbers, but they are as follows: aaa-bbbb
I need a way to enter an area code (the same area code) for all of the numbers in the column without manually entering them (the program I am importing this list to will not work without 9-digit telephone numbers).
Any code I can stick into the end (plus maybe start) of a macro to display the length of time it took for the macro to run?
View 9 Replies View RelatedI just want to see if this is possible, here is the code but what I want is a message box that display how long cetain code has taken to run.
I have most of what I need I just need to figure out how to take one varaible away from another to give the run time... but no idea where to start with it.
Private Type SYSTEMTIME
wYear As Integer
wMonth As Integer
wDayOfWeek As Integer
wDay As Integer
wHour As Integer
wMinute As Integer
wSecond As Integer
wMilliseconds As Integer
End Type
Private Declare Sub GetSystemTime Lib "kernel32" (lpSystemTime As SYSTEMTIME)
Public Function TimeToMillisecond() As String.........
I have the following line from my code of which I am having trouble with I get an error:
If Left(IRange, 1).Value "1" Then
I am trying to find the first string in cell range ...IRange ... I know the Left function = Left(string, length) but can I reference a Range or perhaps cell location within the string argument??? This can be done in excel formulas, but can it be done with VB code??
IRange = Cells (iRow,iCol) and value in cells are Long
My goal is to try and find out how I can use my excel formula:
Left(D3,Find("1",D3)) and impliment this to my above VB line
Need to combine the code below in one line?
View 2 Replies View RelatedThis should be a simple one, But I can get it to work. Could someone advise me as to how I can change this line of code to pick sheet(2) as it is now it picks sheet(1) . and throws the formula off. In A nut shell the formula is looking at sheets(1) C3 When it needs to look at sheets(2) C3. I always get messed up with the & and "" and!
View 3 Replies View RelatedI have the following script which will copy data from one worksheet to another sheet. The data in the first sheet is filtered and therefore it is pasting #n/a in the blank cells of the second sheet.
IMPORTANT: I already can do this with multiple lines of code, however just out of curiousity I was wondering if it could be done with the one line of script and to not have #n/a in blank cells.
HTML Code:
worksheets("BBB").range("A1:E65000").value = worksheets("AAA").range("A1:E65000).specialcells(xlcelltypevisible)
Need vba code for excel that will auto add a formatted row when a button is pushed? I have the button made, but I need it to move down a row each time a user clicks the add line button.
View 3 Replies View RelatedHow do you use the numbering convention for each line??
Private Sub btnShowAllRows_Click() Dim iRow As Integer
125 For iRow = 7 To 30
130 ActiveSheet.Rows(iRow).Hidden = False
135 Next
140 btnShowAllRows.Visible = False
145 btnShowVolChanges.Visible = True
End Sub
I have the following snippet of -
Worksheets(2).Cells(20, 3) = "=IF(C29=""09"",""09"",IF(C28=""08"",""08"",IF(C27=""07"",""07"",IF(C26=""06"",""06"",IF(C25=""05"",""05"",IF(C24=""04"",""04"",IF(C23=""03"",""03"",IF(C22=""02"",""02"",""00""))))))))"
which works. However I want it to be: -
Worksheets(2).Cells(20, 3) = "=IF(C29=""09"",""09"",IF(C28=""08"",""08"",IF(C27=""07"",""07"",IF(C26=""06"",""06"",IF(C25=""05"",""05"",IF(C24=""04"",""04"",IF(C23=""03"",""03"",IF(C22=""02"",""02"",IF(C21=""01"",""01"",""00"")))))))))"
but I can't because I can only have 8 nested IF's.
Is there an alternative way of obtaining the last line of code?
If I number my lines of code and an error occurs, the use of Erl in the VBA will then return the exact VBA line number that the error occurred on. Is it possible to automatically capture or record that same effect when the macro process leaves its current sub and goes to another?
Reason: I'm trying to create a Call Stack that can be reported through an Error Handler that will include the exact location and process that the error occurred to better troubleshoot and understand where and why the error occurred.
The best I can come up with so far is manually putting in bookmarks along way so I know how far along the macro went before the error. From all of my searching I believe retrieving the Excel Call Stack is not possible and so one must be manually created.
Enclosed is an example of what I have so far. It goes through several macros and logs the Call Stack. It’s a work in progress so it is a little sloppy looking but it is functional. If a Sub finishes it is then taken out of the Call stack.
Several "BookMarks" are placed to give an idea of how far along the Macro has gone within that Sub. The Code for the Erl example is:
Sub SampleErrorWithLineNumbers()
Dim dblNum As Double
10 On Error Goto PROC_ERR
' Errors if table doesn't exist
20 Select Case Rnd()
Case Is < 0.2
30 dblNum = 5 / 0
40 Case Is < 0.4
50 dblNum = 5 / 0
60 Case Is < 0.6
70 dblNum = 5 / 0
80 Case Is < 0.8
90 dblNum = 5 / 0
100 Case Else
End Select
110 Exit Sub
PROC_ERR:
120 MsgBox "Error Line: " & Erl & vbCrLf & vbCrLf & _
"Error: (" & Err.Number & ") " & Err.Description, vbCritical
End Sub
I have a problem here.
I am trying to create an inputbox such that the text will display line by line instead of one line display
EG:
Selection = InputBox("Enter Your Selection No. 1 for aaa. 2 for bbb")
Above code will display text as:
"Enter Your Selection No. 1 for aaa. 2 for bbb"
But i would want the text to be displayed in:
"Enter Your Selection No."
"1 for aaa"
"2 for bbb"
Let's say I have a long macro and I want to test some code a ways down in the macro, but I don't want to have to run through all the code to get there, because I already have my Excel spreadsheet set up at the point I need to check and I just want to start checking the code a ways into the procedure.
Short of commenting out all the code above where I want to start, is there another easier way to do this?
I need a hand with a worksheet that we use.
We do a penetration test on soil, write down the values from the machine, then enter into excel and it plots a line graph.
Depending on the values, sometimes a correction is required. This is manually done at the moment.
I would like to have excel do it for us.
I have attached an example of a manual correction I have done as well as the excel calculation worksheet.
There are 2 results given (one at 2.5mm penetration & one at 5.0mm penetration), we calculate both, then use the highest result for the report.
the x value is a constant and the y is a variable.
Attached Files :
Copy of Master WA CBR Worksheet Soaked.xls‎
DOC230714-002.pdf‎
When I use this code below
Private Sub CommandButton3_Click()
Dim MyData
Set MyData = New DataObject
MyData.GetFromClipboard
MyData.SetText Me.TextBox1.Text
MyData.PutInClipboard
MsgBox MyData.GetText
End Sub
I get a debug error on the MyData.PutInClipboard line.
Does the line of code assign the value of cell A5 to the range or is it just a startinig point?
View 9 Replies View RelatedI have a macro code that will create line graph referring the data given in defined column A1-C4,
Code with Static column range:-
ActiveSheet.Shapes.AddChart.Select
ActiveChart.SetSourceData Source:=Range("'Sheet2'!$A$1:$C$4")
ActiveChart.ChartType = xlLineStacked
I tried to modify the above code, so it will refer undefined/dynamic data column, but getting an error during execution "Run Time Error - 424:" "Object required"
Code with Dynamic column range:-
ActiveSheet.Shapes.AddChart.Select
ActiveChart.SetSourceData Source:=ActiveSheet.Range("a1", _
ActiveSheet.Range("a1").End(xlDown).End(xlToRight)).Select
ActiveChart.ChartType = xlLineStacked
I'm just trying to add the "=" operator to the below "" operators, as this line of code presently doesn't account for any numeric matches, of which I have plenty, and DO need to account for! Gosh, might someone here know how to integrate such a thing into this code?
If Range("I3") Temp Then Range("I1") = Temp
I stumbled on this and wasn't sure why the code was placed on different lines and how the highlighted sections in red affect the basic round function.
ColorCompare = Round( _
(111111 + Blue + Red + Green) / (Green + LenPaint) _
, 0 _
)
I have built a small userform with 3 fields. The macro ran OK first few times. Now, when user enters data in the form and clicks OK nothing happens. I found that repeated clicking on OK or Cancel button on form had no effect. I then observed that VBA editor was open and the yellow cursor was displayed on the first code line under cmdOK_click procedure. The code line was also highlighted in yellow. There are no errors to debug and no break points etc. When I clicked the Run (or Continue) icon from the VBA toolbar, the macro completed OK. Question: Why is the macro pausing on the first line and how can I make it run without pausing for no apparent reason.
View 4 Replies View RelatedI have created an AddIn for a project I'm working on using the 'Open' command in Excel Vb. While this worked perfectly for the file I was testing it on (1,740,754 bytes) it doesn't work on a new file (121,445,125 bytes).
On testing the code, one line at a time, it gets stuck on
Line Input #1, DataLine
The files only contain one line so I suspect there is too much data for the command to handle.
Is there an alternative?
I'm trying to search for a column by looking for a specific column header and then format the entire column in the specific number format desired, but I keep getting an error message with this line.
Code:
With Rows("1:1")
.Find(what:="Go Live Date").Column.NumberFormat = "m/d/yyyy"
End With
I have a spread sheet with Column A = Document number, Column B = revision.
I am trying to get a macro that, when run, increases the revision letter in column B. The problem is that we do not use a few of the letters such as I, O, P and Q.
I thought it would be best to have a table of the used revision letters (Say in Z1 to Z40)
Look at the text in column B of the row currently selected and find it in the Z1:Z40 table
Move one cell down the Z1:Z40 table and copy that text back into column B on the row initially selected.
Adding ' in the beginning of a line converts the rest into comment line. I wonder if there is an easy way to convert a huge area into comment line to try something on code. I couldn't find such an option in the menu.
View 2 Replies View Related
