When I use this code below
Private Sub CommandButton3_Click()
Dim MyData
Set MyData = New DataObject
MyData.GetFromClipboard
MyData.SetText Me.TextBox1.Text
MyData.PutInClipboard
MsgBox MyData.GetText
End Sub
I get a debug error on the MyData.PutInClipboard line.
I have a spread sheet with Column A = Document number, Column B = revision.
I am trying to get a macro that, when run, increases the revision letter in column B. The problem is that we do not use a few of the letters such as I, O, P and Q.
I thought it would be best to have a table of the used revision letters (Say in Z1 to Z40)
Look at the text in column B of the row currently selected and find it in the Z1:Z40 table
Move one cell down the Z1:Z40 table and copy that text back into column B on the row initially selected.
i hv following code
(i use generate macro)
my question is how to arrange the code from one line to multiple like :-
following code show in excel macro environment is one striaght line.
' Create new var on yr , and replace 2006 to CY06.
ActiveCell.FormulaR1C1 = _
Our small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
I have a spreadsheet where on a weekly basis data is copied in to various tabs. I then have a "formula" tab where I have a single line of formulas which look up the various data tabs and extract the results I want to show.
Currently each week, before I import the new data into the various tabs, I copy the last row in the "formula" tab and paste to the line below it. This contains all the working formulas. I then paste values only on the line that I copied, thus "locking in" the values it calculated with that weeks data. This means that each row then contains the results with that week's data, and this will grow week by week.
What I am looking for is a formula that automates this process. So let's say that row 30 is the final row of data on my formula tab, it contains the formulas I want to use. I would need a macros that does the following:
1. Looks up last row (row 30)
2. Copies last row (row 30)
3. Pastes to next empty row (row 31)
4. Pastes values only to second last row (row 30)
I'm not too great with writing macros, I've found plenty that can find the last row, but I can't get them to work to highlight that row.
I have the following line from my code of which I am having trouble with I get an error:
If Left(IRange, 1).Value "1" Then
I am trying to find the first string in cell range ...IRange ... I know the Left function = Left(string, length) but can I reference a Range or perhaps cell location within the string argument??? This can be done in excel formulas, but can it be done with VB code??
IRange = Cells (iRow,iCol) and value in cells are Long
My goal is to try and find out how I can use my excel formula:
Left(D3,Find("1",D3)) and impliment this to my above VB line
Need to combine the code below in one line?
View 2 Replies View RelatedI have a large formula written in my VBA code (a sumproduct with numerous variables) which exceeds the line length in VBA and therefore a proportion of the code is shown on the next line.
However, the VBA treats this second line as an error (since it sees it as a new line of code which on its own doesnt work) What do I need to do so that it treats the two lines as a single line of code?
This should be a simple one, But I can get it to work. Could someone advise me as to how I can change this line of code to pick sheet(2) as it is now it picks sheet(1) . and throws the formula off. In A nut shell the formula is looking at sheets(1) C3 When it needs to look at sheets(2) C3. I always get messed up with the & and "" and!
View 3 Replies View RelatedI have the following script which will copy data from one worksheet to another sheet. The data in the first sheet is filtered and therefore it is pasting #n/a in the blank cells of the second sheet.
IMPORTANT: I already can do this with multiple lines of code, however just out of curiousity I was wondering if it could be done with the one line of script and to not have #n/a in blank cells.
HTML Code:
worksheets("BBB").range("A1:E65000").value = worksheets("AAA").range("A1:E65000).specialcells(xlcelltypevisible)
Need vba code for excel that will auto add a formatted row when a button is pushed? I have the button made, but I need it to move down a row each time a user clicks the add line button.
View 3 Replies View RelatedHow do you use the numbering convention for each line??
Private Sub btnShowAllRows_Click() Dim iRow As Integer
125 For iRow = 7 To 30
130 ActiveSheet.Rows(iRow).Hidden = False
135 Next
140 btnShowAllRows.Visible = False
145 btnShowVolChanges.Visible = True
End Sub
I have the following snippet of -
Worksheets(2).Cells(20, 3) = "=IF(C29=""09"",""09"",IF(C28=""08"",""08"",IF(C27=""07"",""07"",IF(C26=""06"",""06"",IF(C25=""05"",""05"",IF(C24=""04"",""04"",IF(C23=""03"",""03"",IF(C22=""02"",""02"",""00""))))))))"
which works. However I want it to be: -
Worksheets(2).Cells(20, 3) = "=IF(C29=""09"",""09"",IF(C28=""08"",""08"",IF(C27=""07"",""07"",IF(C26=""06"",""06"",IF(C25=""05"",""05"",IF(C24=""04"",""04"",IF(C23=""03"",""03"",IF(C22=""02"",""02"",IF(C21=""01"",""01"",""00"")))))))))"
but I can't because I can only have 8 nested IF's.
Is there an alternative way of obtaining the last line of code?
If I number my lines of code and an error occurs, the use of Erl in the VBA will then return the exact VBA line number that the error occurred on. Is it possible to automatically capture or record that same effect when the macro process leaves its current sub and goes to another?
Reason: I'm trying to create a Call Stack that can be reported through an Error Handler that will include the exact location and process that the error occurred to better troubleshoot and understand where and why the error occurred.
The best I can come up with so far is manually putting in bookmarks along way so I know how far along the macro went before the error. From all of my searching I believe retrieving the Excel Call Stack is not possible and so one must be manually created.
Enclosed is an example of what I have so far. It goes through several macros and logs the Call Stack. It’s a work in progress so it is a little sloppy looking but it is functional. If a Sub finishes it is then taken out of the Call stack.
Several "BookMarks" are placed to give an idea of how far along the Macro has gone within that Sub. The Code for the Erl example is:
Sub SampleErrorWithLineNumbers()
Dim dblNum As Double
10 On Error Goto PROC_ERR
' Errors if table doesn't exist
20 Select Case Rnd()
Case Is < 0.2
30 dblNum = 5 / 0
40 Case Is < 0.4
50 dblNum = 5 / 0
60 Case Is < 0.6
70 dblNum = 5 / 0
80 Case Is < 0.8
90 dblNum = 5 / 0
100 Case Else
End Select
110 Exit Sub
PROC_ERR:
120 MsgBox "Error Line: " & Erl & vbCrLf & vbCrLf & _
"Error: (" & Err.Number & ") " & Err.Description, vbCritical
End Sub
I have a problem here.
I am trying to create an inputbox such that the text will display line by line instead of one line display
EG:
Selection = InputBox("Enter Your Selection No. 1 for aaa. 2 for bbb")
Above code will display text as:
"Enter Your Selection No. 1 for aaa. 2 for bbb"
But i would want the text to be displayed in:
"Enter Your Selection No."
"1 for aaa"
"2 for bbb"
Let's say I have a long macro and I want to test some code a ways down in the macro, but I don't want to have to run through all the code to get there, because I already have my Excel spreadsheet set up at the point I need to check and I just want to start checking the code a ways into the procedure.
Short of commenting out all the code above where I want to start, is there another easier way to do this?
I need a hand with a worksheet that we use.
We do a penetration test on soil, write down the values from the machine, then enter into excel and it plots a line graph.
Depending on the values, sometimes a correction is required. This is manually done at the moment.
I would like to have excel do it for us.
I have attached an example of a manual correction I have done as well as the excel calculation worksheet.
There are 2 results given (one at 2.5mm penetration & one at 5.0mm penetration), we calculate both, then use the highest result for the report.
the x value is a constant and the y is a variable.
Attached Files :
Copy of Master WA CBR Worksheet Soaked.xls‎
DOC230714-002.pdf‎
Does the line of code assign the value of cell A5 to the range or is it just a startinig point?
View 9 Replies View RelatedI have a macro code that will create line graph referring the data given in defined column A1-C4,
Code with Static column range:-
ActiveSheet.Shapes.AddChart.Select
ActiveChart.SetSourceData Source:=Range("'Sheet2'!$A$1:$C$4")
ActiveChart.ChartType = xlLineStacked
I tried to modify the above code, so it will refer undefined/dynamic data column, but getting an error during execution "Run Time Error - 424:" "Object required"
Code with Dynamic column range:-
ActiveSheet.Shapes.AddChart.Select
ActiveChart.SetSourceData Source:=ActiveSheet.Range("a1", _
ActiveSheet.Range("a1").End(xlDown).End(xlToRight)).Select
ActiveChart.ChartType = xlLineStacked
I'm just trying to add the "=" operator to the below "" operators, as this line of code presently doesn't account for any numeric matches, of which I have plenty, and DO need to account for! Gosh, might someone here know how to integrate such a thing into this code?
If Range("I3") Temp Then Range("I1") = Temp
I stumbled on this and wasn't sure why the code was placed on different lines and how the highlighted sections in red affect the basic round function.
ColorCompare = Round( _
(111111 + Blue + Red + Green) / (Green + LenPaint) _
, 0 _
)
I have built a small userform with 3 fields. The macro ran OK first few times. Now, when user enters data in the form and clicks OK nothing happens. I found that repeated clicking on OK or Cancel button on form had no effect. I then observed that VBA editor was open and the yellow cursor was displayed on the first code line under cmdOK_click procedure. The code line was also highlighted in yellow. There are no errors to debug and no break points etc. When I clicked the Run (or Continue) icon from the VBA toolbar, the macro completed OK. Question: Why is the macro pausing on the first line and how can I make it run without pausing for no apparent reason.
View 4 Replies View RelatedI have created an AddIn for a project I'm working on using the 'Open' command in Excel Vb. While this worked perfectly for the file I was testing it on (1,740,754 bytes) it doesn't work on a new file (121,445,125 bytes).
On testing the code, one line at a time, it gets stuck on
Line Input #1, DataLine
The files only contain one line so I suspect there is too much data for the command to handle.
Is there an alternative?
I'm trying to search for a column by looking for a specific column header and then format the entire column in the specific number format desired, but I keep getting an error message with this line.
Code:
With Rows("1:1")
.Find(what:="Go Live Date").Column.NumberFormat = "m/d/yyyy"
End With
Adding ' in the beginning of a line converts the rest into comment line. I wonder if there is an easy way to convert a huge area into comment line to try something on code. I couldn't find such an option in the menu.
View 2 Replies View RelatedIs there any way I can display line numbers against the code in the Visual Basic Editor?
Or can I see in the current line number in the status bar?
or GoTo Line number?
I asked for a macro to delete the whole row if a duplicate customer number was found in column B. Sometimes, though, my column numbers change. So, logically thinking, I simply changed the criteria, but the macro ONLY seems to work if duplicate customer numbers are in column B only.
This code below won't work if the Customer Number is in column D instead of B even if the reference of B:B is changed to D:D, it doesn't carry the macro over.?
The following block of code is evaluating the term in the array, if it exists and the value in col. M is a non integer, (which what I am testing for are fractions) then format the cell to a fraction number format.
That is ok, except it is changing the numberformat on text terms. I want it only to change the numberformat on numeric values.
I added the function Isnumeric to this line:
Isnumeric(cells(i, "M").value) Int(cells(i, "M").value)
which I thought would only evaluate numeric cells only, but this was unsuccessful.
Original Code: Unedited.
For i = 4 To LRowf
For Each Item In Array("HAT", "FTWR", "BOOT", "BOOTG", "BOOTY", "HWRISR", "HWBLTS")
On Error Resume Next
If (Cells(i, "F").Value = Item Or Cells(i, "G").Value = Item) And _
Cells(i, "M").Value Int(Cells(i, "M").Value) Then
Cells(i, "M").NumberFormat = "# ?/?"
On Error GoTo 0
Exit For
'End If
End If
Next Item
Next i
See attcahed code. I need to add a line to the code so date picked by the user needs to be both weekday and not a day in the past.
e.i today : 20/06/2006
if user pick a date before today or a weekend date pivot table does not update.
Private Sub MonthView1_DateClick(ByVal DateClicked As Date)
Application. ScreenUpdating = False
If Weekday(MonthView1.Value, vbMonday) < 6 Then
With PivotTables("PivotTable1")
.PivotFields("DATE").CurrentPage = Format(MonthView1.Value, "dd/mm/yyyy")
End With
End If
Application.ScreenUpdating = True
End Sub
creating breaks in the line this script now simply turns the line black.
View 9 Replies View Related