VBA Code Organization Via Line Numbering?

Apr 3, 2014

How do you use the numbering convention for each line??

Private Sub btnShowAllRows_Click() Dim iRow As Integer

125 For iRow = 7 To 30
130 ActiveSheet.Rows(iRow).Hidden = False
135 Next
140 btnShowAllRows.Visible = False
145 btnShowVolChanges.Visible = True
End Sub

View 8 Replies


ADVERTISEMENT

Line Numbering And Stackspace Errors

May 1, 2014

I'm attempting to create a line numbering code snipet where if cell B has a value, then cell A is sequentially numbered by a factor of 1 and so on. I finally got around the stackspace error by putting the code in the 'SelectionChange' sub; however, if I loop more than 20 lines, the system becomes so slow.

'ROWNUMBERMAX = 1
'For ROWCOUNTMAX = 8 To 100
' If Range("C" & ROWCOUNTMAX).Value "" Then
' ROWNUMBERMAX = ROWNUMBERMAX + 1
' Range("A" & ROWCOUNTMAX).Value = ROWNUMBERMAX
' End If
' If Range("C" & ROWCOUNTMAX).Value = "" Then
' 'ROWNUMBERMAX = ROWNUMBERMAX + 1
' Range("A" & ROWCOUNTMAX).Value = ""
' End If
'Next

View 3 Replies View Related

Convert Macro In 1 Line To Multiple Line Code

Dec 8, 2007

i hv following code

(i use generate macro)

my question is how to arrange the code from one line to multiple like :-

following code show in excel macro environment is one striaght line.


' Create new var on yr , and replace 2006 to CY06.

ActiveCell.FormulaR1C1 = _

View 9 Replies View Related

Get Outlook Contacts For Organization Using Excel Macro Vba?

Mar 14, 2014

How to get the outlook contacts for the organization using excel macro vba.

View 14 Replies View Related

Got Stuck In Middle To Display Hierarchy Of Employee In Organization

Aug 5, 2014

I am supposed assign macro to track all employees hierarchy in an organisation.

In Sheet1 I have Employee ID's in D Column and Supervisor ID's in N Column.

And In Sheet2 I assigned macro...

What exactly I need is when I give number and click the button I need all the employee id's in his hierarchy

Concept:

The number which you give should search in N Column and Display D Column Values...and those D column values should search in N column and display D column values....so on.....

So far, it is showing 1 level hierarchy...but I need till end...

View 14 Replies View Related

Importing List To Create Excel Based Organization Chart

Nov 20, 2012

I am aware of the Visio capabilities of importing data into the org chart wizard to create an organization chart. Is there a similar capability in Excel only? I know there are smart art org diagrams, but if I have a spreadsheet of several hundred people, is there a way to import it into a chart (again, similar to the Visio process).

View 3 Replies View Related

Organize From Vertical Organization To Horizontal - Show Blanks Where Items Are Not Found

Jul 9, 2014

I have a list of data that includes employee ID number in column A and a certain document that they have on file (onboarding docs such as I-9, W-4, copy of Social Security card, etc.) in column B. If one employee has 10 documents, they are listed with the same ID number 10 times in A1:A10 and the different document names are listed in B1:B10.

I want to clearly see which employee has which document by having the ID numbers going vertically in column A and then an X or check mark of some sort going across the rows.

The set up of what I would like filled in is in the sheet called "status" and the list of documents on file is in the sheet called "docs."check file.xlsx

I tried a combination of an IF and VLOOKUP with a MATCH function but I wasn't getting what I wanted.

View 2 Replies View Related

Line Code

Apr 2, 2007

I have the following line from my code of which I am having trouble with I get an error:

If Left(IRange, 1).Value "1" Then
I am trying to find the first string in cell range ...IRange ... I know the Left function = Left(string, length) but can I reference a Range or perhaps cell location within the string argument??? This can be done in excel formulas, but can it be done with VB code??

IRange = Cells (iRow,iCol) and value in cells are Long

My goal is to try and find out how I can use my excel formula:

Left(D3,Find("1",D3)) and impliment this to my above VB line

View 9 Replies View Related

Combine The Code Below In One Line?

Mar 24, 2009

Need to combine the code below in one line?

View 2 Replies View Related

Code Too Long For One VBA Line

Aug 21, 2006

I have a large formula written in my VBA code (a sumproduct with numerous variables) which exceeds the line length in VBA and therefore a proportion of the code is shown on the next line.

However, the VBA treats this second line as an error (since it sees it as a new line of code which on its own doesnt work) What do I need to do so that it treats the two lines as a single line of code?

View 7 Replies View Related

Picking Sheet(2) In This Line Of Code

May 5, 2009

This should be a simple one, But I can get it to work. Could someone advise me as to how I can change this line of code to pick sheet(2) as it is now it picks sheet(1) . and throws the formula off. In A nut shell the formula is looking at sheets(1) C3 When it needs to look at sheets(2) C3. I always get messed up with the & and "" and!

View 3 Replies View Related

One Line Of Code To Paste Data

Sep 5, 2012

I have the following script which will copy data from one worksheet to another sheet. The data in the first sheet is filtered and therefore it is pasting #n/a in the blank cells of the second sheet.

IMPORTANT: I already can do this with multiple lines of code, however just out of curiousity I was wondering if it could be done with the one line of script and to not have #n/a in blank cells.

HTML Code:
worksheets("BBB").range("A1:E65000").value = worksheets("AAA").range("A1:E65000).specialcells(xlcelltypevisible)

View 3 Replies View Related

Auto Add Formatted Line With VBA Code

Jan 22, 2013

Need vba code for excel that will auto add a formatted row when a button is pushed? I have the button made, but I need it to move down a row each time a user clicks the add line button.

View 3 Replies View Related

Alternative Way Of Obtaining The Last Line Of Code

Feb 19, 2008

I have the following snippet of -

Worksheets(2).Cells(20, 3) = "=IF(C29=""09"",""09"",IF(C28=""08"",""08"",IF(C27=""07"",""07"",IF(C26=""06"",""06"",IF(C25=""05"",""05"",IF(C24=""04"",""04"",IF(C23=""03"",""03"",IF(C22=""02"",""02"",""00""))))))))"

which works. However I want it to be: -

Worksheets(2).Cells(20, 3) = "=IF(C29=""09"",""09"",IF(C28=""08"",""08"",IF(C27=""07"",""07"",IF(C26=""06"",""06"",IF(C25=""05"",""05"",IF(C24=""04"",""04"",IF(C23=""03"",""03"",IF(C22=""02"",""02"",IF(C21=""01"",""01"",""00"")))))))))"
but I can't because I can only have 8 nested IF's.

Is there an alternative way of obtaining the last line of code?

View 9 Replies View Related

Line Numbers In VBA Macro Code

Nov 20, 2008

If I number my lines of code and an error occurs, the use of Erl in the VBA will then return the exact VBA line number that the error occurred on. Is it possible to automatically capture or record that same effect when the macro process leaves its current sub and goes to another?

Reason: I'm trying to create a Call Stack that can be reported through an Error Handler that will include the exact location and process that the error occurred to better troubleshoot and understand where and why the error occurred.

The best I can come up with so far is manually putting in bookmarks along way so I know how far along the macro went before the error. From all of my searching I believe retrieving the Excel Call Stack is not possible and so one must be manually created.

Enclosed is an example of what I have so far. It goes through several macros and logs the Call Stack. It’s a work in progress so it is a little sloppy looking but it is functional. If a Sub finishes it is then taken out of the Call stack.

Several "BookMarks" are placed to give an idea of how far along the Macro has gone within that Sub. The Code for the Erl example is:

Sub SampleErrorWithLineNumbers()
Dim dblNum As Double
10 On Error Goto PROC_ERR

' Errors if table doesn't exist
20 Select Case Rnd()
Case Is < 0.2
30 dblNum = 5 / 0
40 Case Is < 0.4
50 dblNum = 5 / 0
60 Case Is < 0.6
70 dblNum = 5 / 0
80 Case Is < 0.8
90 dblNum = 5 / 0
100 Case Else
End Select
110 Exit Sub

PROC_ERR:
120 MsgBox "Error Line: " & Erl & vbCrLf & vbCrLf & _
"Error: (" & Err.Number & ") " & Err.Description, vbCritical
End Sub

View 9 Replies View Related

Display Text On New Line Code

Jul 10, 2007

I have a problem here.

I am trying to create an inputbox such that the text will display line by line instead of one line display

EG:

Selection = InputBox("Enter Your Selection No. 1 for aaa. 2 for bbb")

Above code will display text as:
"Enter Your Selection No. 1 for aaa. 2 for bbb"

But i would want the text to be displayed in:
"Enter Your Selection No."
"1 for aaa"
"2 for bbb"

View 9 Replies View Related

Test VBA Code Starting At Specific Line

Sep 4, 2010

Let's say I have a long macro and I want to test some code a ways down in the macro, but I don't want to have to run through all the code to get there, because I already have my Excel spreadsheet set up at the point I need to check and I just want to start checking the code a ways into the procedure.

Short of commenting out all the code above where I want to start, is there another easier way to do this?

View 8 Replies View Related

VBA Code For A Correction To Basic Line Graph

Jul 22, 2014

I need a hand with a worksheet that we use.

We do a penetration test on soil, write down the values from the machine, then enter into excel and it plots a line graph.

Depending on the values, sometimes a correction is required. This is manually done at the moment.

I would like to have excel do it for us.

I have attached an example of a manual correction I have done as well as the excel calculation worksheet.

There are 2 results given (one at 2.5mm penetration & one at 5.0mm penetration), we calculate both, then use the highest result for the report.

the x value is a constant and the y is a variable.

Attached Files :
Copy of Master WA CBR Worksheet Soaked.xls‎
DOC230714-002.pdf‎

View 14 Replies View Related

MyData.PutInClipboard Line Copy Code

Sep 30, 2008

When I use this code below

Private Sub CommandButton3_Click()
Dim MyData
Set MyData = New DataObject
MyData.GetFromClipboard
MyData.SetText Me.TextBox1.Text
MyData.PutInClipboard
MsgBox MyData.GetText
End Sub

I get a debug error on the MyData.PutInClipboard line.

View 4 Replies View Related

Does The Line Of Code Assign The Value Of Cell A5 To The Range

Dec 17, 2008

Does the line of code assign the value of cell A5 to the range or is it just a startinig point?

View 9 Replies View Related

Macro Code To Create Line Graph

May 2, 2014

I have a macro code that will create line graph referring the data given in defined column A1-C4,

Code with Static column range:-

ActiveSheet.Shapes.AddChart.Select
ActiveChart.SetSourceData Source:=Range("'Sheet2'!$A$1:$C$4")
ActiveChart.ChartType = xlLineStacked

I tried to modify the above code, so it will refer undefined/dynamic data column, but getting an error during execution "Run Time Error - 424:" "Object required"

Code with Dynamic column range:-

ActiveSheet.Shapes.AddChart.Select
ActiveChart.SetSourceData Source:=ActiveSheet.Range("a1", _
ActiveSheet.Range("a1").End(xlDown).End(xlToRight)).Select
ActiveChart.ChartType = xlLineStacked

View 1 Replies View Related

Adding Logical Operator To Line Of Code

Nov 4, 2009

I'm just trying to add the "=" operator to the below "" operators, as this line of code presently doesn't account for any numeric matches, of which I have plenty, and DO need to account for! Gosh, might someone here know how to integrate such a thing into this code?

If Range("I3") Temp Then Range("I1") = Temp

View 9 Replies View Related

Place 1 Line Of VBA Code Into Mutiple Lines

Jun 11, 2009

I stumbled on this and wasn't sure why the code was placed on different lines and how the highlighted sections in red affect the basic round function.

ColorCompare = Round( _
(111111 + Blue + Red + Green) / (Green + LenPaint) _
, 0 _
)

View 3 Replies View Related

Macro Stops At 1st Line Of Userform Code

May 10, 2006

I have built a small userform with 3 fields. The macro ran OK first few times. Now, when user enters data in the form and clicks OK nothing happens. I found that repeated clicking on OK or Cancel button on form had no effect. I then observed that VBA editor was open and the yellow cursor was displayed on the first code line under cmdOK_click procedure. The code line was also highlighted in yellow. There are no errors to debug and no break points etc. When I clicked the Run (or Continue) icon from the VBA toolbar, the macro completed OK. Question: Why is the macro pausing on the first line and how can I make it run without pausing for no apparent reason.

View 4 Replies View Related

Vb Code Freezing At Line Input Command

Feb 26, 2007

I have created an AddIn for a project I'm working on using the 'Open' command in Excel Vb. While this worked perfectly for the file I was testing it on (1,740,754 bytes) it doesn't work on a new file (121,445,125 bytes).

On testing the code, one line at a time, it gets stuck on

Line Input #1, DataLine

The files only contain one line so I suspect there is too much data for the command to handle.

Is there an alternative?

View 9 Replies View Related

Fixing Up Single Line Of Code To Format Column?

Apr 20, 2012

I'm trying to search for a column by looking for a specific column header and then format the entire column in the specific number format desired, but I keep getting an error message with this line.

Code:
With Rows("1:1")
.Find(what:="Go Live Date").Column.NumberFormat = "m/d/yyyy"
End With

View 2 Replies View Related

Code To Search For Matching Text In A Table Then Copy Next Line

Jan 26, 2014

I have a spread sheet with Column A = Document number, Column B = revision.

I am trying to get a macro that, when run, increases the revision letter in column B. The problem is that we do not use a few of the letters such as I, O, P and Q.

I thought it would be best to have a table of the used revision letters (Say in Z1 to Z40)
Look at the text in column B of the row currently selected and find it in the Z1:Z40 table
Move one cell down the Z1:Z40 table and copy that text back into column B on the row initially selected.

View 3 Replies View Related

How To Convert Selected Multiple Lines Of VBA Code Into Comment Line

Jan 29, 2014

Adding ' in the beginning of a line converts the rest into comment line. I wonder if there is an easy way to convert a huge area into comment line to try something on code. I couldn't find such an option in the menu.

View 2 Replies View Related

Display Line Numbers Against The Code In The Visual Basic Editor?

Feb 26, 2008

Is there any way I can display line numbers against the code in the Visual Basic Editor?

Or can I see in the current line number in the status bar?

or GoTo Line number?

View 13 Replies View Related

This Simple 10 Line Code Doesn't Work If Just The Reference Is Changed..

Jun 10, 2009

I asked for a macro to delete the whole row if a duplicate customer number was found in column B. Sometimes, though, my column numbers change. So, logically thinking, I simply changed the criteria, but the macro ONLY seems to work if duplicate customer numbers are in column B only.

This code below won't work if the Customer Number is in column D instead of B even if the reference of B:B is changed to D:D, it doesn't carry the macro over.?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved