Collectible Cards Verification Table
Jun 29, 2013
I started a new collection of cards (soccer cards actually) and since I trade with some of my friends via mail, I needed something to keep track of the ones I have and the ones I don't. I made an excel spreadsheet with the numbers of the cards.
Here's my question (I don't know if its possible or not):
I there any way I can create a way to make the verification easier by, for example:
I just got card A20. I write A20 on a specific cell and, in the main table, that number changes color to indicate that I already have that card.
And in the end, a way to reverse the process so I can have the table brand new for the next use.
View 1 Replies
ADVERTISEMENT
Oct 1, 2003
I need to figure out the logic to ignore two cards to make the best possible five card hand from 7 cards total. Has anyone ever done this before?
As I said before, I'm trying to do this in excel only (no vba), so this is much more complicated than usual.
View 9 Replies
View Related
Dec 19, 2008
I am not sure how to go about this but here is my problem: text in cells a40:A147 containing card number this: -01- and cells h40:h147 containing and "x" if the card -01- is closed. Now I want to count all the -01- cards that do not have an x in the h40:h147 cells and I need to count all the -01- cards that do not have an "x" in the h40:h147 cells.
View 2 Replies
View Related
Aug 24, 2013
I would like to format columns "L" and "M", if the value in column "O" contains the letters "EU" or "US". The values in column "O" will look like EU 3 & 2, or US 1 up. or just text with no numbers. I was thinking if I could write a formula that will say 'if the value in cell ?? contains "EU" format color A if the value contains "US" format color B. I know this will take two separate statements but I am not sure how to write it with a wild card to allow for the variations. Something like If value is EU and some wild card string then, format.
View 7 Replies
View Related
Mar 6, 2008
I need to create 50-60 bingo cards for my sister's bridal shower. I wanted to create these using excel. I need to create unique cards so that not everyone bingos at the same time (I only have so many door prizes to give away!)
The basic setup is this: under "B" there are 5 spaces, and each space must have a unique number between 1 and 15 (no repeats). Under "I" there are 5 spaces, and must use a unique number between 16 and 30, "N" has 5 spaces using a unique number between 31 and 45, "G" has 5 spaces using a unique number between 46 and 60, and "O" has 5 spaces using a unique number between 61 and 75. A sample card is below:
BINGO
1416375862
217455773
830366066
1122394761
1223435668
I have tried to use the "randbetween" function, but this creates repeats and I would have to go in and manually change the numbers that repeat.
View 9 Replies
View Related
Dec 19, 2013
I am creating a "board game" type game in excel and one of the functions will be landing on a cell. When you are on this cell you click the checkbox to the left of it which then flips the value to true. I then have another formula generating a random number between 1 and 100 if the value is true. I would like to make cards in a separate sheet out of single cells but make about 40-50 of them maybe less. I want it to be able to pull a card(cell's) contents into another cell on another sheet. But I want it to be a random card associated with the random number generator. I can definitely make changes if this isn't possible but the point of it is to show the contents of one of the random cards.
View 2 Replies
View Related
Feb 21, 2013
In the following code snippet I have worked out a way to verify that the user inputs an Integer and then prompts downstream if an improper value was entered. The user is prompted for a corrected reponse and loops until they get it right. The initial Cancel at the first prompt was causing issues until i saw poster: titarelli use StrPtr(). Except for subsequent cancels, the code works but it is clunky at best. How to tighten this up?
VB:
Dim Quantity As Variant
Dim CorrectedQuantity As Variant
Dim j As Integer
j = 194
Quantity = 0
CorrectedQuantity = 0
[Code] ......
View 2 Replies
View Related
Jun 3, 2008
I have a VBA userform with various textbox fields like 'Name' and 'Address' and 'Amount'
I would like an input box to pop up that asks the user to 're-enter for verification'
So that they have to type the same thing twice, to protect against typos
How do I code it so the program compares the inputbox to the textbox and passes only if they are identical?
(or even, using two inputboxes instead if that would be easier)
View 13 Replies
View Related
Jan 6, 2014
how do I code in vba for it to wait until the user has checked the file that has been made make a few amendments and then when done one would click OK or resume for the program to carry on with the rest of the code.
View 2 Replies
View Related
Apr 6, 2008
i have followed the following criteria correctly
Create a function GetProducerRow() which takes in one String input (give it any name following the conventions) and returns an Integer.
Write a Select Case statement inside the function.It should compare the input string with the various companies listed in the Voting tables in cells F5:F9.
The Case should not use hard coded values for the names of the companies but something like Range("F5").Value.
In each case, set the return value by assigning the appropriate row number. For example, the value assigned would be 5 for "The Hershey Company" store in F5.
Remember to write Case statement for each of the 5 producers.
Add the Case Else in-case none of the producers match the input and have the return value set to 0.
Function GetProducerRow(strProducer As String) As Integer
strProducer = Range("F5")
Select Case strProducer
View 9 Replies
View Related
Jul 19, 2008
I am trying to check what was selected from a validation list range. I need to put up a message box if a certain selection is made. I will try to give some more explaination and detail.
I have a 'Labor Type' cell that has a validation list based on the 'LaborType' range that contains things like T&M, PM, Claim*, Quote, etc. When Claim* is selected, I want to put up the message box reminding the user to enter some additional information.
I have tried a few things like Worksheet_SelectionChange that I can't seem to get to work. I admit it has been a while since I have used a function like this (and never with a list).
View 9 Replies
View Related
Jun 26, 2014
Just curious if there is a way to do some sort of Data Validation form that will check the previous selection and remove it from a list for the next selection? I have several machines that my company sells and I am working on an advanced invoice. I am trying to set it up so that if one machine is selected, it will populate the data validation boxes with one set of "options" for that particular machine. Also, when the user clicks on one option, no matter which one, it will remove that option from the list below it. I have posted up somewhat of a screenshot/crop/paste example of what I am attempting to do.
View 1 Replies
View Related
Oct 18, 2012
I am looking for a formula which will allow me to count unique values in a database, based on multiple criteria. Sample file attached (Formula required in cells J and K).
View 6 Replies
View Related
Jul 16, 2008
Title should read "Data Validation Lists"...oops
I'm trying to format a spreadsheet so that based on the value in Column A, Coulmn B displays one of two spearate dropdown menus.
I know the following formula will not work, but that is the effect I want in Column B.
View 7 Replies
View Related
Mar 5, 2008
I'm trying to write what is supposed to be a simple script that looks at a column of usernames (ColumnA) and passwords (ColumnB). I start off by prompting the user to enter their username in an input box and then I want a loop to check this value against the values in Column A. If the username exists, I want to prompt an input box for the password. If the username does not exist I need some kind of limit on the loop to prompt an input box for the user to enter a new username and password that I'll add to the last row of the data table. The loop part is kicking my butt, this is what I have so far...
Sub Main()
Set StartRange = Worksheets("16.10"). Range("A1")
username = InputBox("Please enter your username.", "Enter username", "Jdoe")
i = 1
Do While StartRange.Offset(i, 0).Value <> "username"
i = i + 1
Loop
If StartRange.Offset(i, 0).Value = "username" Then
password = InputBox("Please enter your password.", "Enter password", "password")
End If
End Sub
View 7 Replies
View Related
Apr 17, 2014
I am trying to have a column that returns either "secure" or "re-assignable" depending on whether the employees title matches the appropriate office/ space allocation.
e.g. an employee who's title is "CEO" and office type is "Large Exterior Office" would return a secure. However an employee with a title of "Admin Assistant", who's office type is "Large Exterior Office" would return "re-assignable"
View 1 Replies
View Related
Nov 13, 2012
I have a condition setup (under "This Workbook") upon opening a spreadsheet to verify a computer's predetermined motherboard serial number that will shut the Excel workbook down if the numbers do not match. This works fine. What I'd like to do is to add a second condition that will allow a password to be entered in a textbox if the numbers do not match so that the serial number condition could be manually overridden, if necessary. If the serial number and the password are incorrect the workbook automatically closes.
Here is the code that works:
Private Sub Workbook_Open()
If CreateObject("Scripting.FileSystemObject").GetDrive("C:").SerialNumber "-XXXXXXX" Then ActiveWorkbook.Close False
End Sub
Here is what I am attempting to do that is not functioning properly - need to add a textbox to enter a password to override an incorrect serial number
Private Sub Workbook_Open()
If CreateObject("Scripting.FileSystemObject").GetDrive("C:").SerialNumber "-XXXXXXX" Then
Dim Rng
Rng = InputBox("aaaaaa")
If Rng "aaaaaa" Then ActiveWorkbook.Close False
End Sub
View 9 Replies
View Related
Feb 15, 2010
I would like to add a piece of code into the user form that will check and verify if a part has already been added so as to avoid multiples in a user-driven/created database.
here is a repost of the current code i am using for the user form (I have posted it before in another thread .. Blane245 helped me out with a different question I had)
View 7 Replies
View Related
Aug 30, 2013
I have two worksheets in my report cards:
1) Data - the students are listed in Column A, math scores in Column B, reading scores in Column C and science scores in Column D. The grades of 300 students are entered in this sheet.
Student
Math
Reading
Science
Jimmy
75
84
100
[code].....
2) Report Card template - This is the report card that needs to be generated for each student. It's pulling the student name and grades from the Data worksheet.
Student Name
=Data!$A2
Math
=Data!$B2
Reading
=Data!$C2
Science
=Data!$D2
How do I create worksheets (report cards) for additional students? I have 300 students in the school. I need the next worksheet to reference Data!$A3. I know how to cut and paste the report card template and then edit =Data!A2 to be =Data!A3 to create a report card for Sally. How do I create the 300 report cards I need?
I've been teaching for 13 years. I can create a report card for each student in my class and edit each worksheet individually for each student. Now I've been asked to do this for the whole school and I don't know how to create the other 299 sheets I need.
View 1 Replies
View Related
Apr 25, 2014
I have excel result sheet which contains students information. i.e. name, subjects and their corresponding marks, grade, percentage etc. So from that sheet I want to print result cards for each students separately from the data (result sheet).
View 4 Replies
View Related
Jun 12, 2013
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100.
I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
View 2 Replies
View Related
Feb 1, 2010
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
View 14 Replies
View Related
Mar 14, 2014
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
View 2 Replies
View Related
Apr 14, 2009
I would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields:
Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.
View 3 Replies
View Related
Mar 27, 2012
I have a very large excel data file, which I want to analyse using pivot tables. The problem is that while most of the columns are headed with the variable name (e.g. country) and have the list of variables displayed under that heading for each observation (e.g. Italy), the years are spread across the columns - i.e. the heading for column X is not "Year", but is 2003, with the next column being 2004, etc.
Is there a quick way I can re-arrange the data so that the layout is consistent and so that I can use it for pivot tables? I have way too many observations to do this by hand.
View 1 Replies
View Related
Sep 11, 2009
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
Table 1
Team 1Team 2Team 3Team 4Team 4Team 5Team 5ABABCity 12531642City 231173705City 367891125City 436251348
Table 2
City 4City 2City 1City 3Team 4BTeam 2Team 5ATeam 4ATeam 1Team 3Team 5B
View 2 Replies
View Related
Sep 8, 2009
Data Table including-
List of Identifying Code Numbers for customer invoices
Multiple repetitions of individual Identifying Code Numbers in list
Various data in table range including Various Values of invoices from different dates for each repetion of Identifying Code Number.
- Wish to find largest invoice for each Individual Identifying Code Number in the table without using a pivot table.
i have tried combining Max and Large functions with Vlookups etc.
View 9 Replies
View Related
Oct 5, 2011
There is pivot table for some reason the last column (YEAccts), which sums all the other columns values is exluding the 1st column for some reason. This "YEAccts" shows up fine in the pivot table "field list". And I followed the source for this and it's a table in a different tab that pulls data from an access query connection.
The name of the column that is summing up the rest of the columns is "YEAccts", but for the life of me I can't seem to find where this column is in the source table tab or even in the access query where the data is being pulled from.
How to find this "YEAccts" column? Also, why would it exclude not summing up the data in the first column?
View 2 Replies
View Related
Apr 26, 2012
Recently, the boss showed me a Pivot table & chart, which consists of a list of about 30 user names in the first column. The row headings were the different items they purchased from a vending machine. & when he clicked on any name in the first column, this created a new sheet, renamed with users name, with a small table of results showing what that person purchased.
Problem is, none of us can figure out how to do this. I have created a new Pivot table & chart exactly like the original, but I cannot get the smaller sheet to generate. (Excel 2010)
View 3 Replies
View Related
Dec 17, 2012
I have a table with list of equipments and asset number assigned as primary key, I wanted to have a history movement of these equipments but my idea is somehow not logical and very primitive to update every time 2 excel sheets:
ie:
asset no
description
received by
day
[Code].....
View 2 Replies
View Related
