I think this can be done by using VBA but i was wondering if there was a way to do this without.
I would like to highlight (with Conditional formatting) if a cell contains a formula. Or if easier, colour a cell if it doesnt contain a formula.
Is it possible and what formula to use in the conditional format formula field to do this?
I have a auto generated report that colours a certain column, that shows all the items that are in receiving error. I want to pivot the data and show the break down on the colours used; Green = newly added, Amber = escalated, Red = urgent
at the moment I'm adding a column next to it and filling it in myself. is there away to automate this? either via a custom forumla or marco
Is it possible to use the colour of a cell in a SUMIF formula? i.e On the worksheet differnt entries are colour coded depending on what they relate to. If I only want to add all the cells that are Blue can it be done?
View 9 Replies View RelatedIs it possible to use a formula to shade a cell dependent on a condition? I have tried an if formula (see below) but it is incorrect. =if('November 2006 SVOC'!B6>'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [red],if('November 2006 SVOC'!B6<'March 2006 SVOC'!C6,'November 2006 SVOC'!B6 [blue],))
View 3 Replies View RelatedI need to set a cell colour by the value of a cell in another sheet so i can't use conditional format. Is there a formula that allows the user to set a cell style, colour, font etc.
View 9 Replies View RelatedI would like it to loop through all the charts on the "Graphs" sheet.
It works well but gives a "Run-time error '1004'" Application-defined or object-defined error afterward that I would like to get rid off.
VB:
Sub Colour_Chart_working()
Dim rngColors As Range
Dim rngCell As Range
[Code].....
I have a lookup that gives and RGB colour code in Cell A1; for example 186, 206, 140.
I'd then like Cells R10:V15 to fill with the RGB colour based on the result in A1.
how to change the cell colour due to a sum increase or decrease? For example: if the amount is greater than 200, change cell colour to green. If under 200 change cell colour to yellow.
View 2 Replies View RelatedA column of cells can be 1o different shades of green according to their value (achieved by using conditional formatting.) I want to arrange that at a certain time all the cells of a part of the row of a formatted cell are the same colour.
View 4 Replies View RelatedI want to write an "if" formula which determines the colour of the adjacent cell. For example if colour of A2 is red then B2 is 1,else B2 is 2.
View 9 Replies View RelatedI'm trying to get the Find and FindNext methods to work. Column C contains serial numbers and there's a chance that a serial number might appear more than once in the column. What I'm trying to do is get Excel to find the first occurance of the serial number, find what row it's on and then see if this matches the variable 'CurRowNo' (defined earlier in the code). If it doesn't I want it to look at the other occurances of the serial number, find what row they're on and see again if it matches CurRowNo.
The variable 'EngCount is the number of occurances of the serial number (also worked out earlier in the code). I've got the code below, but I get the error 'Method Range of Object Global Failed' on the FindNext line. I have no idea what this error means or why it's happening.
some method by which a user can insert a row that will then copy any forumulas, not their resultant value, in the row above into the new row. The best would be for a user to be able to just use Insert > Row from the toolbar and then have a macro automatically run, but I am willing to use any possible solutions.
I know that there are other posts on this subject, but I can not figure out how to make the information in them work for me. I know that I need to go to View Code in order to insert the code, but I am not clear on what to do after that in order for the code to function, even how to exactly enter the code (should I enter into General or Worksheet, into Sheet1 or ThisWorkbook, etc..). I saw someone mention something about using now() somehow to get code to automatically run or using toolbar buttons, both of which I do not understand how to do.
I have a large spreadsheet that is colour coded. E.g. Red means x and Blue means y etc.
Do you know if it is possible to build a formula to count how many red cells there are?
Is it possible to search Excel by cell colour, i.e. font colour...and then change the said colour to another one?
View 3 Replies View RelatedThe example Spreadsheet shows the current method of Ascending or Descending
Data according to Macro. Is there a way to replace the current Ascending or Descending macro code with a formula for the required cell groups only?
i am looking for a formula, if i put it as plainly as i can then i hope someone can work it out for me!
if ad4 is greater or less than 30 then ad4 text is red, if ad4 is equal too 30 then text is green
I'm using vlookup to find data, but the data is highlighted in different colours and I need this to appear as well as the data/text. Is there a way to do this? The data is individually highlighted with a specific RGB colour for each one and so far could not think of a way to do this. In the end there will be 81 RGB colours and text answers (just in case there is a limit, but if I had to I could break this down to 14 and less for each cell).
View 1 Replies View RelatedI want to change the colour of rows depending on the letter that is in a column. I want it to do it over all the sheets of the document. In the G column there will be letters like 'W' and 'L' that signify something and I want to make it clear by changing the row colour fill. I've tried a few formulas I found by googling but they didn't work. I should point out that the letters are connected, so if I put a 'W' on the second sheet it appears on the first sheet as well.
View 2 Replies View RelatedMy workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies View RelatedI work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Ive also attached the worksheet
I have a table which says that this is the amount of coloured cells we have in another sheet.
For e.g.
Field Name Code A
Item Description 5
Now, the item description column has 5 cells in another sheet which are filled in with "Yellow" Colour. So what i want to do is to click on this 5 in sheet 2 in this case as per the attached sample which takes me to the filtered result on sheet1 of 5 yellow coloured cells under the column of Item description including an additional filter of Code "A"
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies View RelatedIn the xls for each step I have 2 raws-planned and actual. Step planned duration is populated manually over the weeks.Before that row we have another reflecting the actual step status per week
I would like to find a way how cell reflecting the actual status of a step can be automatically populated (coulored) based on the colour/value of activities that are planned for that week and for that step.Activities are listed below the step and again have planned and actual row.
The rule should be : if for a week we have several activities all of them should be finished in order to have step stataus auto populated as green. If a single activity planned for that week is not done-then weekly step status should be red.
The activities for each step are grouped below the step. It seems that one of the difficult part in that request would be how formula will understand where starts and finishes the activities that belong to one step. To get that happen I placed a column showing step and another column where we activity.
Using 2007, I need to conditionally format a cell colour based on 5 other cell colours that have been conditionally formatted. The 5 other cells will be coloured either red or greem. What I want to do is have an overall status cell that would be show green if all of the other 5 cells were green, amber if 4 of the other cells were green and one was red and red if 3 or more cells are red.
View 4 Replies View RelatedIt is possible to add something in a spreadsheet VBA to colour a cell Green and put a box surround on it if the cell = "Closed" from A7:V65535
Basically I have four conditions for status of a task and i can only use 3 formats on conditional formatting so i need some code to format the last remaining status type which is "Closed"
Got this part of code to make it the correct colour
With Selection.Interior
.ColorIndex = 4
.Pattern = xlSolid
So I have a macro that colors the selected cells in a certain color. Now im looking for a code that will switch that color every 7th cell, the cells will only be selected horizontally. For example:
if the selected range is 10 cells, 7 of them should be in one color and 3 of the should be in another. But if the selected range is 15 cells the first 7 should have one color and the next 7 should have another and then the last one should have the first color again, and so on..
I have a table:......
I want to colour in the relevant cells for each ref depending on the numbers in the stage column. So for the first line, the cells in columns 1,2,4&6 need to be shaded in. For the second line, the cells in columns 1,2,3,4,&5 need to be shaded in. I already have a lot of conditional formatting set on the sheet so need to do this with a macro.
I have tried to write something but am having issues with it finding the 1 and shading in the correct column but then jumping out of the loop and on to the next cell.
I am trying to make the colour of cell change depending on the result in an adjacent cell and have found and adapted the following:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("x4:x202")) Is Nothing Then
Select Case Target
Case 11
icolor = 43
Case 21
icolor = 43
Case 31
icolor = 27
Case 41
icolor = 27................