I have a sheet (calender month) with week number in the top row, date on the second and weekday on the thirdh.
Is there some code that will change the background colour of the entire column when the weekday say's sa or su (saturday/sunday)?
I could do it manually but every year the first of januari starts on a different day and I would like to automate it.
Really need a formula for a traffic light system
ie
if 3 colums have entries no
4 Maybee
5 yes
and it highlight it in green amber or yellow
I have a lookup that gives and RGB colour code in Cell A1; for example 186, 206, 140.
I'd then like Cells R10:V15 to fill with the RGB colour based on the result in A1.
I wonder if the following is possible in the worksheet_open event. I want to be able to open my worksheet and see via a message box all the important features I need to look at.
Using column AG,
Take the cells that are conditionally formatted to red, take the corresponding cells in column A & B and output this
information in a message box.
I would like it to loop through all the charts on the "Graphs" sheet.
It works well but gives a "Run-time error '1004'" Application-defined or object-defined error afterward that I would like to get rid off.
VB:
Sub Colour_Chart_working()
Dim rngColors As Range
Dim rngCell As Range
[Code].....
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
Scenario 1-AIF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR…
Scenario 1-BIF the number of days difference is MORE than 7 days, highlight the cells in the "Vacation Ended" column and "Number of Days" column GREY..................................
I want to change the back ground colour of each row until G column when there is a text in the first cell. I have attached the excel that I want the background colour to be. Like suppose, F1 is the details of family 1, F2 is for family 2. I want each family to be coloured. The rows are not fixed for each family. If F1 details are coloured green, Fr is orange, F3 is green and F4 is orange again. And the number F1, F2, F3, F4 and so on are not ordered in ascending. They can be random. But I want the colour coding to be the same as what I have shown in the excel. I have so many rows like that. How do I do that using excel. I have tried conditional formatting. But it doesn't work.
View 2 Replies View RelatedI have the following code to go through various values in a column and colour code them. However I am facing two issues here:
1. I need to generalize the code such that it runs through column G till column S in different worksheets
2. Few columns between G and S do not have any data and the code is getting stuck at the line below:
myResult = WorksheetFunction.Average(Range("G:G"))
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
i'm currently using some VBA code to insert a formula and sum certain rows. Which rows to sum is determined by the following line...
View 5 Replies View RelatedI have a userform that outputs data to a worksheet. One of the textboxes contains either one of 3 values, either: N/A, Debit, or Credit. This textbox is called "tbDebitOrCredit".
What I need is, when the the user clicks the "Submit" button and the data is output to the worksheet, the cell that recevies it output from "tbDebitOrCredit" turns a specific colour based on the value.
For example:
N/A = White
Debit = Red
Credit = Green
My query is , I require the UCF column for the ID having maximum number (last five digits) of UCF column for the respective year column values
IDUCF Yr
559589876543212610007971212
559589876543212610000333712
559589876543213610004703013
563829876543212630000323912
My answer should be like below (or) having an additional column saying Active/Inactive.
IDUCF Yr
559589876543212610007971212
559589876543213610004703013
563829876543213630004703113
563829876543212630002782312
I have data in columns A:D with the headings Proposal, Sort_Code, Seq, Comm, and data in row 2:???, it is in the format below, / is to show a new column, I want to look at the proposal column (A) and the sort_code column (B) and then take all the data that is associated with it in the comm column(D) and combine it in column E on the first row of the proposal number. A Formula or macro would work for me.
0733596/001/1/line 1
0733596/001/1/line 2
0733596/001/1/line 3
0733596/001/1/line 4
0733596/002/1/line 1
0733596/002/1/line 2
0746715/001/1/line 1
0746715/001/1/line 2
0746715/002/1/
0732387/001/1/
0732387/002/1/line 1
0732387/003/1/..........
It's quite funny that i'm asking this cause I answered a similar quesstion earlier. But I can't seem to get my head around the thinking of this one.
I am trying to create a formatting so that if todays date is greater than the date in the cell the cell is coloured red. And if todays date is > today()-14 <today() the cell is coloured yellow.
I don't think it is as simple as using conditionaly formatting, it may well be but like I said I can't quite get my head around what I need to do.
Can you sum cells based on colour, and if so, how do you determine what code/number your colour is to input into the programming?
View 13 Replies View RelatedI humbly seek help on the "Find and Add based on Font Colour". For instance, A1="urgent"(with red font) and I want B1 to return as "ATTENTION". Other than red font, it will return as empty string. Can Conditional Formatting do the task?
View 9 Replies View RelatedI'm trying to change the colour of a row based on the value in a cell (in a column) and am wondering how I can do that. Conditional formatting doesn't allow enough colours unfortunatly. Ive googled it and can only get a cell colour to change not a row colour.
To give an explanation:
Sheet 1: Rows 5 - 100 colour to change based on Sheet 2 Column K5-100.
Column K5-K100 will have values between 0 and 10.
I am trying to establish whether there is a excel formula which will allows you to just to count the cell with the same cell colour. I have made the below listed example to illustrate what I am trying to achieve:
A B C D E11/03
12/03
13/03
14/03
15/03
Total
[Code].....
In the there are total of two green colours, and one red colour to be counted.
I have a auto generated report that colours a certain column, that shows all the items that are in receiving error. I want to pivot the data and show the break down on the colours used; Green = newly added, Amber = escalated, Red = urgent
at the moment I'm adding a column next to it and filling it in myself. is there away to automate this? either via a custom forumla or marco
I am trying to include numbers in an average if two separate columns prove true. For example, I want to include all numbers in column "C" in the average if the cell in column "A" matches a name and the cell in column "B" is equal to the number 1.
View 2 Replies View RelatedI am trying to make a cell change colour based on the partial content of another cell.
For example, cell A4 has a alpha-numeric sequence in it and I want cell B4 to turn blue if part of the sequence is ABD or F&C.
I am trying to get spreadsheet cells to change colour relating to arrival and departure dates. I also need the cells to be assigned value so I can use them to calculate cost based on number of nights, eg arrive Sept 10 dept Sept 15 = 5 nights. I can then use this 5 to multiply out costs.
I have attached an example of what I am trying to achieve.
I have searched the forum and saw similar questions but I couldnt apply them.
I am trying to create a Macro/VB code that will build 4 lists based on a list (see attached example).
I have a list of applications and the numbers of users having them installed on their computers, these applications are marked using a RAG status (Red, Amber, Green & NBR No Business Requirement) on a seperate work sheet i want to split them by these RAG statuses, the status of applications changes as they are packaged for SCCM, so the RAG status will be changed, so i want the code to be able to rebuild the lists at any time to obtain an accurate view of the numbers at each status.
I have a circle object on an Excel spreadsheet(I used "Insert", "Shapes" to put it there).
I would like to change the colour of the circle object based on the contents of cell A1.
Cell A1 will be "Red", "Yellow" or "Green".
If I type "Green" into cell A1, then I would like the circle object to change to green.
If I type "Yellow" into cell A1, then I would like the circle object to change to yellow....
I've seen examples of VBA that will colour autoshapes based on cell values. I have a map of the UK made up of autoshapes that have been edited to create a shape of each postcode area such as EX, GL, NR etc. Also I have a list of all these postcode areas and I have given them a zone number (1-7) depending where in the UK they are.
PcodeZoneDH3DL3DN2DT1DY2E4EC4EH5
At the moment I have set the colours using the fill option so anything that is a particular zone is a certain colour (i.e. zone 2 is green).
What I would like to do is to set a zone to a colour, so the map will update all the zones with the right colours.
I need to be able to read the zone number that is assigned to a postcode area and change the relevant autoshape to the correct colour so that any postcode area can be one of 7 colours.
I can't attach a spreadsheet with my map and postcodes otherwise I would have.
Is there an easy way i can read the zone number of each postcode area in the list and update that autoshapes colour? Would the autshape need to have a name so it know which one to update or is this not possible?
I have found this code that, with changes, I can make work with the cells and columns I am using. What I cannot see is how to make more than one cell change colour rather than just the cell in column J.
How can I change the code below to change several cells in the row? I will be using cells in columns A:F.
Data will be entered into the rows from A2 to E2, in F2 a vlookup will enter one of the values, "High", "Medium" etc.
Each of these values has a colour assigned. The code below, with alterations, will be able to colour the cell in F2 depending on which value is entered. I need the whole row from A2 to F2 to be coloured.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim ChangedRange As Range
Dim r As Long, iCol As Long
Set ChangedRange = Intersect(Target, Columns("F:H"))
[Code] ......
Trying to run a VBA to colour a range of cells based on the input of a name. I can write the basic level VBA to colour one cell by numerical input but struggling to see how this can be adapted to colour a range of cells and if instead of 1,2,3,4 etc the case could be replaced as text: eg Joe, John, Jason etc.
View 9 Replies View RelatedI am trying to make different colour arrows appear based on a set criteria, I am having issues with the hide/show amber part, it doesn't seem to be doing the "AND" part.
'Hide/Shows Green'
Private Sub Worksheet_Change(ByVal Target As Range)
If Range("A1").Value >= 0 Then
ActiveSheet.Shapes("Arrow1").Visible = False
Else
ActiveSheet.Shapes("Arrow1").Visible = True
End If
'Hide/show Red'
If Range("A1").Value = 0 And Range("A1").Value
I have inherited a spreadsheet from someone else that rather cleverly (in my humble opinion) sets the colour dependant on the contents. ie negative value is red, zero is amber and positive is green.
i like the idea and would like to use it on a spreadsheet of my own, but have tried to find out how it is done and can't!
I would like to change cells A2 to G2 to a different colour based on the value of G2
(0 to 48) Dark Green
(-2) Light Green
(-4) Yellow
(-6 to -48) Red
The range of the sheet would be A2 - G130. Each Row would change on value of cells in Column G.