Extracting Data Based On Other Columns Data?
Nov 18, 2013
My query is , I require the UCF column for the ID having maximum number (last five digits) of UCF column for the respective year column values
IDUCF Yr
559589876543212610007971212
559589876543212610000333712
559589876543213610004703013
563829876543212630000323912
My answer should be like below (or) having an additional column saying Active/Inactive.
IDUCF Yr
559589876543212610007971212
559589876543213610004703013
563829876543213630004703113
563829876543212630002782312
View 1 Replies
ADVERTISEMENT
Jan 23, 2013
I have a spreadsheet full of data and I need to extract only those lines of data which can be identified by the last three letters in a cell. I am adding an example spreadsheet which highlights the rows I am trying to extract based on the contents in column B but only where column B ends in KY.
Example data extract requirement.xlsx‎
View 5 Replies
View Related
Oct 2, 2011
I have two columns. In one people either saw Red, Blue, or Green. In the other people either chose One, Two, or Three.
I would like to get excel to read the first column, find all the times someone picked red, then look to the column next to it and see if they picked the number One. Then I would like it to count that situation. Then I want to do it for Two and Three. In the end I would have something that looked like this
---------One----Two---Three
Red-------5------8-------9
.
Blue-------4------5-------3
.
Green-----4------2-------6
Generated from something that looks like this
Red One
Blue Two
Blue Three
Green Two
Some kind of biconditional countif maybe
View 1 Replies
View Related
Apr 27, 2014
The link to my file is: [URL] ........
I am using excel 2003.
My query goes like this:
I need to find out "total lifted quantity"(i.e. the sum of 'first state lifted quantity'+'second state lifted quantity'+'third state lifted quantity') for each "state" for each "size" and each "grade".
However when I am applying a pivot table (as seen in Sheet1) it is not giving data in lucid form. I don't want to split the data for three states in three different tables (as seen in Sheet 4).
View 1 Replies
View Related
Aug 5, 2009
I have a table with 'Product Rereference', 'Date', and 'Estimated Assets' Columns. I need to run a formula that will extract the number in my 'Estimated Assets' column, based on speicific list of 'Product Reference' numbers that I have filetered, and a specific date - 1/31/ of each year.
I've been trying to create a formula, however I can't seem to work it out.
I have attached a file, which should make things a lot clearer :P I am trying to make the data extract into the table to the right. I have filled in the first few columns manually, to show what I would like to formula to achieve.
View 4 Replies
View Related
Jul 11, 2014
I currently have a macro that looks at one value and copies the data to another worksheet.
I'd like to modify it to look at two different values and then copy the data. I've tried modifying the VBA code, but can't seem to get it to work. In the "ETF Report (1)" tab, i want it to look at the "ETF Report" and "PO No" values.
The Final Version tab is what i'd like the results to look like.
View 4 Replies
View Related
Jul 3, 2013
I have a column of data that contains text such as 'as per A3', 'B4 requested' and 'as per F6 Mark' (these aren't cell references).
I'm trying to find a formula that will just strip out the 'A3', 'B4' and 'F6' element of the text. I've tried SEARCH with wildcards but it's not working, and can;t use the LEFT RIGHT or MID functions due to the inconsistent data.
View 4 Replies
View Related
Jul 9, 2014
one of my suppliers can only provide me with a basic .xls product list as shown in the attached test sheet.xlsx.
Is it possible to create and run a macro from test sheet.xlsm that will extract data from test sheet.xlsx, specifically from below the heading on row 64 down to and above the heading on row 123 and paste into the (new) worksheet in test sheet.xlsm
This sheet is updated daily and all the heading rows are constantly fluctuating as products are sold and added.
I can do this manually easy enough but if there's any way that this can be automated
View 4 Replies
View Related
Jul 26, 2014
I have a workbook with 2 sheets.
Sheet 1 will act as a summary for sheet 2, showing only the last 5 entries from sheet 2.
Sheet 2 is based on football results of a season which will have a total of 34 league games plus cup games.
Sheet 2 has 4 columns:
Game Number Home Team Result Away Team
1 United 2-0 City
2 Sportive 4-2 Uniao
3 Real 1-0 Ateltico
4 Villa 1-3 City
5 United 2-1 Real
6 Atletico 0-0 Villa
So sheet 1 will show the last 5 results as the season progress's and new data is added.
I have been able to extract column 'GAME NUMBER' using the following formula:
=INDEX('Back end 1'!A:A,MATCH(9.99999999999999E+307,'Back end 1'!A:A)-ROWS('Back end 1'!A2:A$6)+1)
I am struggling to find a way to pull the last 5 data that is text based.
I am using Excel Mac 2011.
View 3 Replies
View Related
Oct 4, 2006
I'm trying to do is build a form that will allow me to select from a list of options, that links back to a catologue of data so that when i click on the generate button it will pull the data associated to the item selected from the list into a text box in excel. I have attached the form that I have created.
View 4 Replies
View Related
Mar 9, 2009
I have written basic macros (probably not the most efficient solution, but its what I know how to do). Up to the present point things are going well. (I tried to attach file, but without success - So I will email the file directly it is pretty easy to figure out) I have option buttons tied to macros that populate a data sheet based upon the input.
This works out quite well and I am able to generate the statistics I desire quite easily. Now comes the second phase, (this is where I am stuck) - when I click the option button "no", I would like this to generate a line item in a separate existing worksheet which lists the item number, tells the discrepancy (as written in the column on the inspection criteria sheet), has a text field for the inspector to briefly explain the exact nature of the discrepancy, and also keeps discrepancies in proper order. Conversly, if "yes" is selected, I would like to be able to check the associated comment page, search the page for that discrepancy number, and if found, delete the line item, then re-oder the page.
View 8 Replies
View Related
Sep 27, 2013
I have data and after doing some data manipulation it looks like this
Job #
Part #
Lot #
Total
Grand Total
[Code]..
What I'm trying to do is making a summary sheet that has only the first record with unique values using the Job number, part number, and lot number as the criteria. The grand total in the first record is the total for all of that job,part,lot so i need to bring that value over to the sheet as well. I have been able to do this easily with the duplicate finder, but need a formula to automatically do this.
View 2 Replies
View Related
Jan 2, 2013
I have sheet full of data containing results of multiple tests on various equipment.The sheet contains many columns of data but below are the specifc criteria i want to use to extract the data. As maintenance is carried out regularly the list is always growing. I want to create a dashboard summary of the "Machines" which i will colour using condition formatting. I will list the machines in the columns and would like the rows below each machine to be populated with the results.
Column 1 Lists the various factories
Column 2 Lists the Machine
Column 3 Lists the Part
Column 4 Lists the result.
Results can either be "ok", "warning", "Alert" only
View 6 Replies
View Related
Mar 20, 2014
I have a directory folder with an active workbook and another workbook id like to copy data from. The Following macro opens up a file in the same directory, copies some data and pastes it in the active workbook. However with this code I have to specify the filename, 'Data.xlsm' in the example code. I would like it to copy data from the only other workbook in the current directory WITHOUT having to specify the name in the code, so just opening it up no matter what filename it has.
In addition I would like to extract the filename from the workbook im copying data from and paste it into the activewoorkbook in sheet 1 Cell A1. I had a look at getopenfilename function but cant seem to make it work for my purpose.
View 4 Replies
View Related
Feb 20, 2007
I have data in columns A:D with the headings Proposal, Sort_Code, Seq, Comm, and data in row 2:???, it is in the format below, / is to show a new column, I want to look at the proposal column (A) and the sort_code column (B) and then take all the data that is associated with it in the comm column(D) and combine it in column E on the first row of the proposal number. A Formula or macro would work for me.
0733596/001/1/line 1
0733596/001/1/line 2
0733596/001/1/line 3
0733596/001/1/line 4
0733596/002/1/line 1
0733596/002/1/line 2
0746715/001/1/line 1
0746715/001/1/line 2
0746715/002/1/
0732387/001/1/
0732387/002/1/line 1
0732387/003/1/..........
View 9 Replies
View Related
Apr 23, 2007
What I have is a column of data(text) which contains amongst all the text three strings of text in ever cell in the column which I require copying into three adjoining cells
The data I require is :-
(a) The persons name which is always after the word ‘Requester’ e.g. Requester Steve Robinson
(b) Their office location which is directly after the persons name and is in brackets e.g. (Newcastle User)
(c) The Approving persons name which is preceded by ‘Approved by’ e.g. Approved by Christine Hunting
See examples 1 & 2 below
Example 1
CR0/CRZ3651 Requestor Steve Robinson (Newcastle User) Tel: 01234 798157 Approved by Christine Hunting
Please install and configure 2 Ultra 2s (typhoon and lancaster) for use as ARTE workstations. These workstations require Solaris 2.5.1 plus the same patches as before
Example 2
CR0/CRZ3118 Requestor Doug Cunningham (Newport User) Tel: 0114 9881480 Approved by John Smithers
Please provide support to set up Cisco 2691 Router and PIX-506E Firewall to enable external connection of a remote terminal for project work.
As you will appreciate the text in the cells is of non standard lenght and the three pieces of information can be located virtually any where in the text
View 9 Replies
View Related
May 20, 2008
10/05/0808:30:00 AMValid Card EntryLamDoor 1
10/05/0808:31:00 AMDoor Leave Open Door 1
10/05/0808:32:00 AMDoor Closed Door 1
10/05/0808:41:00 AMValid Card Exit Yap Door 1
10/05/0808:46:00 AMValid Card Exit Lam Door 2
10/05/0809:14:00 AMValid Card EntryLam Door 2
10/05/0810:18:00 AMValid Card Exit Lam Door 2
10/05/0810:19:00 AMValid Card Entry Yap Door 1
10/05/0810:40:00 AMValid Card Exit Yap Door 1
10/05/0810:42:00 AMValid Card EntryLamDoor 2
11/05/0808:30:00 AMValid Card EntryLamDoor 2
11/05/0808:20:00 AMValid Card EntryYapDoor 1
11/05/0810:20:00 AMValid Card Exit Lam Door 1
11/05/0811:40:00 AMValid Card Exit Yap Door 1
the above is the data i need to work with (dates are in dd/mm/yy). i need to find a way (a macro, preferably) to extract the date and time corresponding to one person, and paste it into a new sheet, e.g. at sheet 2 (renamed to "lam") should be
10/05/0808:30:00 AM 11/05/0808:30:00 AM
10/05/0808:46:00 AM 11/05/0810:20:00 AM
10/05/0809:14:00 AM
10/05/0810:18:00 AM
10/05/0810:42:00 AM
View 10 Replies
View Related
Jul 10, 2009
I have a worksheet with 20+ columns. For this macro, I only need to focus on 4 of them. However, none of these columns are ever in a fixed position so the macro would need to find them by name and NOT by column position. Here they are...
1. Vacation Type (will only have a text value of either "Cold" or "Warm")
2. Vacation Started (will always have a date *x/xx/xxxx)
3. Vacation Ended (sometimes it will have a date '*x/xx/xxxx' and sometimes it will NOT have a date and will be truly blank)
4. Number of Days (currently has ALL truly blank cells)
THIS WHOLE MACRO SHOULD NOT BE CASE SENSITIVE ANYWHERE
Here's what I would like the macro to do...
Scenario 1 - for "Cold" values Find "Cold" text values in the "Vacation Type" column
"Cold" values WITH a date in the "Vacation Ended" columnIF there IS a date in the "Vacation Ended" column in the same row, put the number of days difference between the "Vacation Started" column and "Vacation Ended" column in the "Number of Days" column.
The amount of days in the "Number of Days" column will determine whether these cells should be highlighted GREY or RED.
Scenario 1-AIF the number of days difference is 7 days or less, highlight the cells in the "Vacation Ended" column and "Number of Days" column RED.
OR…
Scenario 1-BIF the number of days difference is MORE than 7 days, highlight the cells in the "Vacation Ended" column and "Number of Days" column GREY..................................
View 2 Replies
View Related
Apr 30, 2007
Please check the attached workbook. Sheet "Data" has some bank account data, and whether the dues are paid or pending.
What I need is, I need to extract only the data of Column A and B into a new worksheet, only if G is in the Pending status.
I don't want to use a macro, nor a pivot, nor autofilter. I need to do it through formulas. I have seen this been done before, but can't figure it out. The max number of pending accounts wont be more than 10, so need to just pull the formula down 10 rows. I have already entered the data in the second sheet that would be the result.
This second sheet is sort of a supervisor sheet, so that whenever they want they can open it to see the number of Pending accounts.
View 3 Replies
View Related
Jan 11, 2010
I need to extract some part data from available raw data. The data format is like this ABC-00000000. The problem i am facing that this data is placed in rows that contain other information like this.
e.g. "Bill # ABC-00002345 realized"
some times the data is fed in this fashion
"Bill # ABC 2342 realized"
or
"Bill # ABC - 3232 realized"
or
"Bill # ABC000032324 realized"
now i need to extract the data highlighted in red and arrange it like data highlighted in green.
I tried to use mid and find function but could not arrange the extracted data in to desired form.
A VBA code or formula is required.
View 9 Replies
View Related
May 5, 2006
I want to count how many fruits I have. But I only want to count if there is data in row A. I would like the formula to tell me how many of each fruit when there is data in row A. check out my example.
View 2 Replies
View Related
Apr 13, 2013
I have a sheet (calender month) with week number in the top row, date on the second and weekday on the thirdh.
Is there some code that will change the background colour of the entire column when the weekday say's sa or su (saturday/sunday)?
I could do it manually but every year the first of januari starts on a different day and I would like to automate it.
View 9 Replies
View Related
Dec 30, 2008
I am trying to include numbers in an average if two separate columns prove true. For example, I want to include all numbers in column "C" in the average if the cell in column "A" matches a name and the cell in column "B" is equal to the number 1.
View 2 Replies
View Related
Oct 24, 2012
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
View 1 Replies
View Related
Sep 21, 2012
two things on the attached sheet.
First problem: in column B, I have a formula based on contents of column A. However, the limitations of 7 nested IFs leaves me with errors - I need 3 more IFs. Is there a way around that?
Second problem: I need to show the row of the first (earliest time in column A) and the last (latest hour in column A) record for each name. I've been sorting by name and time, then manually deleteing the rows I don't need. I know there's a better way, but I can't find it!
View 6 Replies
View Related
Oct 19, 2012
I am working on a new budget spreadsheet that I am creating. I want to accurately calculate credit card expenses. As everyone who has a credit card knows, charges made this month are not due to be paid until next month. To make matters more complex, charges made from (for example) January 20 until February 19 are not due to be paid until March 20. With that in mind, I created a spreadsheet with a different tab for each month. Each tab has a place to put in all expenses. Here is an example:
date
Category
Expenses
Remarks
[Code].....
Obviously, The above example is from January. IN the February tab, I want to calculate everything in the "Expense" column that has a date in the "Date" Column before Jan 20 and where it says "Kohls - Frank" in the Category column. Of course, in the March tab, I would need to grab all of the "Kohls - Frank" expenses after Jan 20 from the January tab, and everything before Feb 20 from the February tab.
I figured out how to add up everything with the following formula: =SUMIF(Jan!A:A,("<="&DATE(2013,1,20)&E32),Jan!C:C) How can I filter on the Category tab?
View 1 Replies
View Related
Jan 23, 2014
I have three columns of data, one containing numerical values. I want to average the numbers based on the other two columns of data. Attached is an example file with the desired output I'd like. What is a formula that will do this?
AverageExample.xlsx
View 7 Replies
View Related
May 19, 2014
I have a large volume of data and i need to manage and organize somehow.
Example:
A B C D E
CHRIS AN204 2005 Apple Green
CHRIS AN204 2005 Apple Red
CHRIS AN205 2005 Apple Yellow
TOM AN204 2006 Apple Green
This should look like this
A B C D E
CHRIS AN204 2005 Apple Green, Red
CHRIS AN205 2005 Apple Yellow
TOM AN204 2006 Apple Green
I manage somehow to find a VBA code that will merge my rows, but it's not working as it should. It's losing data.
Also in a cell it can happen to have more than 255 characters.
View 1 Replies
View Related
Mar 18, 2014
I have a spreadsheet with hundreds of rows. Columns C and D contain either TRUE or FALSE. I want to be able to automatically delete the rows where both columns are FALSE.
View 1 Replies
View Related
Feb 27, 2008
I'm trying to hide columns based on information in another column. If that column contains "A" or "B", hide columns "U" through "W". If it contains "A", "B", "C", or "D", hide columns "V" through "W". Etc, etc., so on and so forth...
I've snipped the code I found earlier and modified it to (what I thought) was correct for my application, but it doesn't seem to do anything. (btw, should I get an error if it doesn't run correctly?)
Here is the code as modified:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "P:P" Then
If LCase(Target.Value) = "A" Or LCase(Target.Value) = "B" Then
Columns("U:W").EntireColumn.Hidden = True
ElseIf LCase(Target.Value) = "A" Or LCase(Target.Value) = "B" Or LCase(Target.Value) = "C" Or LCase(Target.Value) = "D" Then
View 9 Replies
View Related
