I wonder if the following is possible in the worksheet_open event. I want to be able to open my worksheet and see via a message box all the important features I need to look at.
Using column AG,
Take the cells that are conditionally formatted to red, take the corresponding cells in column A & B and output this
information in a message box.
I have a workbook that can open a URL into IE when a project number is entered in an input box.
What I would like to happen is that if the project number entered does not have a URL against it and the value is #N/A, then the message box will display "Project does not exist". However if the number does exist, I want a different message box to be displayed which is a yes/no box.
The code below is what I have tried which works fine if the cell value is #N/A but when it is not it throws an Run-Time error 13: Type mismatch
Code:
Sub SearchPidsMessageBox()
Dim Answer As String
Dim MyNote As String
[Code]....
I have built conditional formatting into some cells on ' Sheet 1' and would like a message box (saying "Check errors before closing") to appear when the user tries to close the workbook if any of these cells are coloured red (ColourIndex 3).
View 3 Replies View RelatedI have a lookup that gives and RGB colour code in Cell A1; for example 186, 206, 140.
I'd then like Cells R10:V15 to fill with the RGB colour based on the result in A1.
I have created a sheet that calculates a score. Based on that score a determination is made to do one of three things - Nothing, Peer/Manager Review, Review Required.
In addition it was requested now that I make an overall decision for "Review Required" based on multiple triggers. My thought was to create a table from outputs of each element on another sheet, and then trigger off the table. What I am stuck on is using the multiple choices to trigger the message - Below are the choices of which each or a combination of each should trigger "Review Required"
Calculate Review Required
Total Score 'Review Required
Element 1 "
Element 2 "
Element 3"
Element 4"
Element 5"
Element 6"
Element 7"
Element 8"
Element 9"
Element 10"
Element 11"
Element 12"
Element 13 "
Element 14 '20 or more = reveiw
Element 15 '20 or more = reveiw
Element 16 '20 or more =review
Element 17 'Sum 20 Total of above if less than 20 in each
When the whole row in excelsheet is full for particular date that means all the values of columns (Legal Charge,GA and DNM) have been entered for particular date then display an error message if the another user tries to enter the values for the same date .
It means the user can enter the values for same date only if values of Legal Charge,GA and DNM are empty,otherwise an error message should pop up.
I would like it to loop through all the charts on the "Graphs" sheet.
It works well but gives a "Run-time error '1004'" Application-defined or object-defined error afterward that I would like to get rid off.
VB:
Sub Colour_Chart_working()
Dim rngColors As Range
Dim rngCell As Range
[Code].....
I created a userform to filter some data according to some specifications and then spit out the results. After some tinkering, I've gotten everything to work as far as I can tell. Though it isn't mandatory, I would like to get a message to pop up telling the user if no results matched their specifications. I've included some of my code for reference.
'Filter results upon clicking SearchButton
Range("A1:I73").Select
Selection.AutoFilter
Selection.AutoFilter Field:=3, Criteria1:=LiqEndComboBox.Value
Selection.AutoFilter Field:=4, Criteria1:=SealsComboBox.Value
'PressureTextBox filter
[Code] .........
i have a routine which loops through a range looking for past dates and when it finds one display the result in a message box in my testbook i only use 25 rows but it gets annoying having to click ok for every find....is it possible to collect all results and display them in the message box at one time?
Private Sub Workbook_Open()
Dim Mycell
Dim Rng
Set Rng = Sheets("Sheet1").Range("B1:B25")
For Each Mycell In Rng
If Mycell.Value < Date Then
MsgBox Mycell.Offset(0, -1).Value & " Is Overdue By " & Date - Mycell.Value & " Days, Take Action Now!", vbOKOnly, "Tasks Overdue"
End If
Next Mycell
End Sub
I want to display a comment/note that is always visible however:
*The text in the comment should change "only when" the user of my worksheet "clicks" on a specific cell in the worksheet;
*I do not want that a comment appears/disappears/ changes when the mouse moves over any of the cells
*I do want that the same comment/note is used to display different text when the user clicks on another cell in the worksheet
*I do want that the user can position this comment on his screen where he wants it to be.
I am using this code to display a message when a range is empty on workbook save. Case "A" gives an error when referring to a range, the second case works fine. How can I change it?
Code:
Private Sub Workbook_BeforeSave(ByVal SaveAsUI As Boolean, Cancel As Boolean)Select Case Worksheets("Sheet1").Range("B6").ValueCase "A" If Worksheets("Sheet2").Range("D104:D109").Value = "" Then MsgBox "Cells cannot be empty!" Exit SubCase "B", "D", "F" If Worksheets("Sheet2").Range("D112").Value = "" Then MsgBox "Cells cannot be empty!"Case ""End SelectEnd Sub
I have four cells c1 thru c4. The SUM of these cells must equal 1. I want to display an error message "sum of cells not equal to 1.0" but only when data has been entered in all four cells.
For instance =SUM(C1:C4, "<>1") should display the error message. Is there a way to write the formula with an IF statement and still use data validation with error message box?
Assumptions:
-Will ignore blanks
-Error message "Sum of cells are not equal to 1.0" until values in all four cells have been entered, not after a value is entered in a cell. (validate expression after all four cells have values or blank)
Scenarios:
c1 = .25, c2 is blank, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .25, c3 = .25, c4 = .50 TRUE no error message should displays
c1 = .25, c2 = .30, c3 = .25, c4 = .50 FALSE error message should display after value is entered in c4
etc
What I don't want is for the error message box to display after .25 is entered in c1 because the user is still in the process of adding values. Can this be done using Data Validation in Excel 2010?
Im currently studying for an ICT A level and im in my first year doing AS. Im working the AQA board and i have a project that i have a target for an A! I need to create a system for a business and write a report on everything i did...wont go into detail. Anyway. i am having trouble with an IF FUNCTION!!! I have a cell (E35) that contains a percentage.
I want the IF function to display a message depending on what the percentage in cell E35 shows;
IF, 0>> Display "Bad"
40>> Display "OK"
70>> "Good"
90>> Display "Very Good"
E35>=100 >>>> Display "Excellent"
I have tried so many things and I was so sure i entered it correctly, but it keeps coming up with an error.
I have a spreadsheet and in column D, I have look up formula which looks up value from another tab. What I want to do is if the look up finds #N/A or blank cell. There should be a message box appear warning that all the cells in column D might not be updated properly.
View 4 Replies View RelatedI am trying to create a formula which will allow me to type a word in a cell on the Main sheet, and then pull any row from multiple sheets and display them on the Main sheet. For example, my sheet named Main looks like this:
A B C D E
1 Query:
2 Fruit Store Cost Mode Date
And there's a sheet for each month with the same format and different data:
A B C D E
1 Fruit Store Cost Mode Date
2 Apple Dominicks 1.99 Bagged 3/16/2014
3 Apple Piggly Wiggly 2.19 Ala Carte 3/14/2014
4 Banana Jewel 0.49 Bagged 3/1/2014
5 Banana Dominicks 0.57 Ala Carte 3/16/2014
6 Banana Costco 0.69 Ala Carte 3/16/2014
7 Cantaloupe Jewel 2.99 Ala Carte 3/14/2014
8 Cantaloupe Dominicks 1.99 Ala Carte 3/1/2014
9 Eggplant Jewel 0.99 Ala Carte 3/30/2014
10 Eggplant Dominicks 1.19 Ala Carte 3/30/2014
11 Eggplant Costco 1.29 Ala Carte 3/21/2014
12 Eggplant Safeway 0.79 Ala Carte 3/16/2014
13 Pears Jewel 1.19 Ala Carte 3/14/2014
14 Pears Dominicks 1.59 Bagged 3/1/2014
15 Pears Piggly Wiggly 0.99 Ala Carte 3/30/2014
16 Rhubarb Jewel 0.99 Ala Carte 3/14/2014
17 Rhubarb Piggly Wiggly 0.59 Ala Carte 3/14/2014
18 Rhubarb Costco 0.89 Ala Carte 3/14/2014
19 Tomatoes Jewel 1.99 Ala Carte 3/1/2014
20 Tomatoes Safeway 1.69 Bagged 3/30/2014
21 Tomatoes Dominicks 1.89 Carton 3/27/2014
... and so on. On my main sheet in Cell B1, I want to type a fruit name, such as Banana, and have every row in every sheet with Banana in column A,pulled and displayed on the Main sheet. Firstly, is this even possible with a macro?
What I want to do is very similar to a Data Validation message, where a message pops up when you select a the cell. I want that message to be the value of another cell in the same worksheet.
I would also be open to a solution where you simply mouse over a cell to see a comment/message.
I have a sheet (calender month) with week number in the top row, date on the second and weekday on the thirdh.
Is there some code that will change the background colour of the entire column when the weekday say's sa or su (saturday/sunday)?
I could do it manually but every year the first of januari starts on a different day and I would like to automate it.
I have a userform that outputs data to a worksheet. One of the textboxes contains either one of 3 values, either: N/A, Debit, or Credit. This textbox is called "tbDebitOrCredit".
What I need is, when the the user clicks the "Submit" button and the data is output to the worksheet, the cell that recevies it output from "tbDebitOrCredit" turns a specific colour based on the value.
For example:
N/A = White
Debit = Red
Credit = Green
It's quite funny that i'm asking this cause I answered a similar quesstion earlier. But I can't seem to get my head around the thinking of this one.
I am trying to create a formatting so that if todays date is greater than the date in the cell the cell is coloured red. And if todays date is > today()-14 <today() the cell is coloured yellow.
I don't think it is as simple as using conditionaly formatting, it may well be but like I said I can't quite get my head around what I need to do.
Can you sum cells based on colour, and if so, how do you determine what code/number your colour is to input into the programming?
View 13 Replies View RelatedI'm trying to change the colour of a row based on the value in a cell (in a column) and am wondering how I can do that. Conditional formatting doesn't allow enough colours unfortunatly. Ive googled it and can only get a cell colour to change not a row colour.
To give an explanation:
Sheet 1: Rows 5 - 100 colour to change based on Sheet 2 Column K5-100.
Column K5-K100 will have values between 0 and 10.
I am trying to establish whether there is a excel formula which will allows you to just to count the cell with the same cell colour. I have made the below listed example to illustrate what I am trying to achieve:
A B C D E11/03
12/03
13/03
14/03
15/03
Total
[Code].....
In the there are total of two green colours, and one red colour to be counted.
I have a auto generated report that colours a certain column, that shows all the items that are in receiving error. I want to pivot the data and show the break down on the colours used; Green = newly added, Amber = escalated, Red = urgent
at the moment I'm adding a column next to it and filling it in myself. is there away to automate this? either via a custom forumla or marco
I work for a UK charity and have a list of funders in an Excel 2007 spreadsheet.
One of the columns refers to the date on which a new application for funding can be made to that particular funder.
In many cases new applications for funding can't be made for 1 or more years since the last application - sometimes as many as 5 years later. How to get a cell to refer to the date that it contains.
For example, say I have in cell A1 "The Acme Funding Organisation" and in cell B1 (i.e. the "Reapply when?" column) a date of 01/04/2013 (British date format, i.e. 1 April 2013) then what I want Excel to do is to look at the date in cell B1 and if that date has been reached to highlight the cell red. That way I'll know that the reapply date has been reached & that a new application can be made.
I am trying to create a sheet in XL 2010.
In Column A each cell will contain a date (differnet from other cells in that column) when inspection was last done.
Column B is when the weekly inspection is due.
Column C is when bi-weekly inspection is due.
Column D is when monthly inspection is due.
Column E is when 6 monthly inspection is due.
I need a formula to change the colour of cells B, C, D & E when each inspection is due depending on the date entered in A
I am hoping its possible that the cell colour can stay for 2 days after the due date and then return back to blank after the second day.
For example if cell A1 has a date of January 1 2013 then on January 8 2013 cell B1 turns red then on January 10 2013 the cell returns back to normal.
A1
B1
C1
D1
E1
Inspection Date
Weeekly Due
Bi-WeeklyDue
Monthly Due
6 Monthly Due
January 1 2013
Change red Jan 8 & return blank Jan 10
Change red Jan 15 & return blank Jan 17
Change red Feb 1 & return blank Feb 3
Change red June 1 & return blank June 3
Ive also attached the worksheet
I have a table which says that this is the amount of coloured cells we have in another sheet.
For e.g.
Field Name Code A
Item Description 5
Now, the item description column has 5 cells in another sheet which are filled in with "Yellow" Colour. So what i want to do is to click on this 5 in sheet 2 in this case as per the attached sample which takes me to the filtered result on sheet1 of 5 yellow coloured cells under the column of Item description including an additional filter of Code "A"
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies View RelatedIn the xls for each step I have 2 raws-planned and actual. Step planned duration is populated manually over the weeks.Before that row we have another reflecting the actual step status per week
I would like to find a way how cell reflecting the actual status of a step can be automatically populated (coulored) based on the colour/value of activities that are planned for that week and for that step.Activities are listed below the step and again have planned and actual row.
The rule should be : if for a week we have several activities all of them should be finished in order to have step stataus auto populated as green. If a single activity planned for that week is not done-then weekly step status should be red.
The activities for each step are grouped below the step. It seems that one of the difficult part in that request would be how formula will understand where starts and finishes the activities that belong to one step. To get that happen I placed a column showing step and another column where we activity.
Using 2007, I need to conditionally format a cell colour based on 5 other cell colours that have been conditionally formatted. The 5 other cells will be coloured either red or greem. What I want to do is have an overall status cell that would be show green if all of the other 5 cells were green, amber if 4 of the other cells were green and one was red and red if 3 or more cells are red.
View 4 Replies View RelatedI am trying to make a cell change colour based on the partial content of another cell.
For example, cell A4 has a alpha-numeric sequence in it and I want cell B4 to turn blue if part of the sequence is ABD or F&C.