I have a column of data. I would like to space this out so that each value is separated by two spaces.
E.g.
1
2
3
-->
1
2
3
I can do this manually (by inserting two cells), but I wondered if there is a way to do this automatically?
(I have a column organised with the spaces immediately to the left of the column I want to change.)
I have a table in the format below with about 3500 rows
Column A
Column B
0001
All vehicles, Retirements
0002
All vehicles, Retirements, Addition
0003
All vehicles, Retirements, Addition, Deletion from Y
I would like to change it to the following format:
Column A
Column B
0001
All vehicles
0001
Retirements
0002
All vehicles
0002
Retirements
0002
Addition
0003
All vehicles
0003
Retirements
0003
Addition
0003
Deletion from Y
I have a list of data in individual cells in one excel column thus...
Item 1
Item 2
Item 3
And I would like the data to read thus in one cell...
Item1,Item2,Item3.
Is there an excel function I can use to do this quickly and efficiently?
Comma separated data on sheet 2, look up info on sheet 1, return comma separated data on sheet 2.
Sample file attached : Book1.xlsx
I have been able to produce a column that gives me key date information. I might have many empty cells in that column before it hits another date. I need to get this data over to another sheet and place it in a row.
I am trying to get it to look like this:
B2(value), C2(value),D2(blank),E2(Value),F2(Value),G2(blank) etc depending on how many more elements are found in the sheet.
I am able to find topics that allow me to copy a range of data but not one that will allow me to copy a range then skip a cell.
I have alot of data with data and time in one column, and temperature in another. All my data is bunched together, i have temperature measurements every 3 minutes, 24 hours a day, for about a month... and then after that, i have temperature measurement 10 minutes a day, 24 hours a day for several months
I want to group my data by hour, so for my 3 minute measurements, 20 values make up one hour. And for my 10 minute measurements, 6 values make up one hour. I want to know if there is a way to space out my data so that it groups it/ spaces it out. So for the 3 minute values, it would list 20, then put say 3 blank rows, then 20 more values, then 3 blank rows etc.... and for the 10 minute values, it would be 6 values, then 3 blank rows, 6 values, then 3 blank rows etc...
If my file is like so
A1 B1 C1 D1 E1
A2 B2 C2 D2 E2
A3 B3 C3 D3 E3
i NEED THE OUTPUT IN NOTEPAD
A1B1 C1 D2 E1
A2 B2 C2 D3E2
The spacing varies from row to row
if i am saveing as notepad file....in macro how can i give the spacing properties give an example macro and i will customize it according to my need
i have written a macro to parse data in to four columns using the text to columns fixed width option, but unfortunately the data i get changes its spacing and configuration every day, meaning that the fixedwidth columns dont separate the data correctly. below is how it looks some of the time.
46632hac5 Jpmcc 2007-ld12 a5 19,340,005 315
0738qac5 bscms 2007-pw17 a5 23,142,005 265
61746wcz5 msdwc 2000-prin a5 3,600,005 305
32108hp75 bacm 2007-2 a5 2,000,005 465
46630edf5 lbubs 2006-c1 a5 1,000,005 285...............
Text to column function. My database includes dates and names of medications separated with superscript numbers. The numbers are not fixed. So I need a separation between any superscript figures.
Example:
³4002/60/61³51³4002/50/11³gm³bat gm52 nanizon³מרוסק³ ³³006³4002/50/60³gm³stelbaT gm02 livomiS³³ ³³01³
The data is in reverse order but this was solved already.
I have a list of companies and employees, if a company has more than 1 employee listed, I need to combine all instances of the employees into 1 row per company separated by a comma.
OLD FILE: Sample.xlsx
NEW FILE: Sample.xlsx
I have a column A1 that consists of a range of values separated by a comma.
row 1:value 1, value 2, value 3, value 4
row2: value1, value 4
Row 3: value 2, value3
I want to get the unique counts for each value in the filtered list. This one field is not filtered but the others in the table are so I only want the counts of value 1-4 when the entire list is filtered.
I have been able to accomplish this with individual values using the following formula:
=SUMPRODUCT(SUBTOTAL(3,OFFSET('1. Respondents'!$C$7:$C$39312,ROW
('1. Respondents'!$C$7:$C$39312)-MIN(ROW('1. Respondents'!$C$7:$C$39312)),,1)),
--('1. Respondents'!$C$7:$C$39312=C4))
This works great other than the fact that I need to count total values of the column in an array.
I have extracted a string from my address database which goes like name,address1,address2,city,postcode,country
I need to display in Column B as:
name
address1
address2
city
postcode
country
how to do this using VBA.
Here's what I have.. (on a much smaller scale)
http://www.jmetenterprises.com/produ...pics/excel.jpg
(notice how the lines that match are now even.)
[Edited by admin~ *Link* to large images, don't display them]
I have four columns of data. Column A is for the Model, B is for options, C is for color, and D is for Trim. What I need to do is for each model I need to have the options in column B to be listed down the page without commas. Each 3 code option needs to have it's own cell. In the below example there are 8 models with their options, color, and trim. I cannot have the options mixed up with the other models. Hope this makes more sense.
Here is the raw data ...
I have a couple of columns that look like this in basic form:
Column A Column B
A 1
B 1
C 0
D 2
E 1
F 0
G 2
What I want is in a separate worksheet for it to pull the names (A, B, E) that have 1s next to them in column B and put them in a list.
I could do this kinda manually, but how can I create a nice list in a separate column on a separate worksheet just of the names (column A values) where there is a 1 in column B? All I can think to do is vlookup the data and put blanks where its not equal to 1 and then manually delete out the other rows.
I am in need of a macro that will scan a worksheet row by row, noting the column names (found in I2 to AQ2) in a specific horizontal span of cells (I to AQ) that hold (any) data. The macro will then paste these column names in a designated cell on each corresponding row (always found in column F), separating the column names with commas.
I am trying to do this for multiple worksheets containing ~100 rows - the example attached is just a quick demo of what I'm hoping to achieve. Also, these worksheets are contained in one big workbook, so ideally I'd like to be able to run the macro once and have it apply to every sheet in that workbook (they all have the same layout - the only big difference is the number of rows). If the Total Scenes part at the bottom of the sheet is problematic in getting this to work, it's fine to remove it.
I am currently trying to count data in one cell separated by commas. The spreadsheet attached will make things look a lot clearer.
The "CURRENT" table is what I currently have and the "IDEAL" table is what I would like (but not hard-coded). Sheet 3 is where the meaningful data is. So for example, E4 has "CC-12" which is "Open" and "CC-11" which is "Closed". Therefore I would want there to be a "1" in cell F4 and G4 and a "0" in H4.
Formula to put in F4:H5?
Cell(i,1)have 3 Numbers
Each Number Not Allowed Greater Than 10
Each Number In Cell(i,1) Will Be Added 1 In Cell(i,3) And Cell(i+1,3)....
How Can I Seperate Numbers And Make Three Variables To Run Macro
A
1,3,10
2,5,9
C
2,3,10
1,4,10
3,5,9
2,6,9
2,5,10
Need Macro (code) to copy specific cells from a sheet into a new sheet in a desired format. I have an excel file which has data set in 20 rows. Each row has multiple fields. At the end of each data set there is a blank row. I want to capture specific data fields for each data set (e.g. Name, Bank no. etc) and put it into the respective heading. This process needs to be repeated for all the data sets.
A sample sheet is attached for better explanation. Sheet 1 has the raw data and sheet 2 has the required output. The no. of data sets shows in sheet 1 is just a sample. In actual it would be a large no. of such data sets.
Table A: I have data separated by coma & space in cells A1:A4
A: Data Table
*A110, 20, 30, 40, 50, 60
211, 21, 31, 41, 51, 70
316, 19, 37, 48, 59, 81
418, 23, 33, 42, 57, 78
Table B: I want to calculate difference between cells A1:A2, A2:A3 and so on…
And if it is possible as shown in cell B2:B4
B: Result Table
*AB110, 20, 30, 40, 50, 60
211, 21, 31, 41, 51, 70
+1, +1, +1, +1, +1, +1
316, 19, 37, 48, 59, 81
+5, -2, +6, +7, +9, +11
418, 23, 33, 42, 57, 78
+2, +4, -4, -6, -2, -3
Separating cells A1:A4 data in separate cells can do this.
But if it is possible solution can be done as shown by VBA will be greater.
In column A, there are 13000 plus entries mixed with General and Text Formats.:
12234
1223
01234
the cell containing number starting with Zero is formatted as "text". The problem is that there are certain spaces given after some entries in certain cells. How those can be located and deleted.
What the quickest way to get rid of trailing spaces from a column of imported data ?
View 12 Replies View RelatedI have a list of items in Column A and size info on Column B i want to being in the info to another sheet with a vlookup but the problem is that I have a lot of items with different colors so after the item no. it has a dash and a letter or two for the color so i want to bring into my new sheet all info.
I have in my old sheet for all items regardless of color so for instance in my old sheet i will BR1000-EM and then in my new sheet i will have BR1000-R and BR1000-SA and BR1000-YC how do i make a vlookup it should only lookup the values in both sheets only till the dash (i cant use a certain no. like left,6 because the item no can have more then 6 but it always has a dash when it has a color code) also not all items have dashes so the dash is not always there but when its there i would like that the lookup should stop by the dash.
I'm in need of some VBA code (to be included in a Macro) that will automatically use the TRIM function for all cells in a whole column and that will then replace the values in that column with the resulting TRIM values. I have a LOT of individual files with varying #'s of records in them, so a way that will address all of them (all the cells in the specified column due to varying #'s of records) would be best.
View 3 Replies View RelatedIf I have, in one cell (call it D1):
EH,DR,HU
and in a lookup table on another sheet:
A B
1 ED T
2 EH F
3 DR G
4 HU H
5 SE E
6 YU E
I need to be able to lookup the values in D1 on the table and return the values in column B to a single cell (say E1), also comma separated...
eg...
F,G,H
I have the below code that I would like for the data to fall in the exact same space underneath their proper headings. I cant create an html shot for specific reasons and so I am stuck with creating the table in this manner. Does anyone know how to on a single row to accomplish placing date so it looks like a table
10 spaces
20 spaces
30 spaces
that way the number will always fall on space number 10, 20 and 30 on same row
strbody = "Please find attached the daily position report and Profit/Loss report for COB " & FileDate & Application.Rept(Chr(13), 10) _
& "SPREAD " & " UTILIZATION" & " FLAT " & " UTILIZATION" & " OPTION " & " UTILIZATION"
Is there a macro that will allow me to create text to row from a comma separated cell, but also associate the cell to its left automatically?
The table below exemplifies what I need. The top of the spreadsheet is how my data is currently. The portion after the break is how I would like it to be.
I have over 600 rows that needs this done.
1,2,3,4
B
[Code]....
Every AM I run a report that has ALL of our company order numbers from the 2 systems we use. I get those reports and put them into 2 columns. instead of manually inserting so they all match up, is there a way to do this automatically? ....
View 9 Replies View RelatedI have a list with fractions such as 25 1/4, 33 5/16, 20 15/16, etc. i have them formatted as FRACTIONS 2 DIGITS 21/25. Manny of those have double spacing ex: 25 1/2, So i am wondering if theres a way to take the extra spacing off the ones that have double.
View 10 Replies View RelatedI have 10 items on my x-axis. Is there a way to space item 10 further apart than the other 9?
View 9 Replies View Related