I have 5 columns, each with some data. On the 6th column I need to combine the data from all 5 columns into column 6 to be as: Data in A2-Data in B2-Data in C2-Data in D2-Data in E2. With one exception. column D is the date in this format 27-Aug-09. I need the date to be modified on the fly from 27-Aug-09 to be 270809 which will be the info in D2. See example attached.
View 3 RepliesLet's say there is a name (Big Bird) in cell A1
Let's also say that cell B1 has =Today()
How can I make cell C1 = Big Bird 3/13/2013?
I need a macro, that will merge the cells and the data in cell A1 with data in B1, and the data in cell B1 will paste to the end of data in cell A1.
Column A Column B
KL8CB6S90DC505233
3GYT4MEF9DG331323
I need the final result to look like this:
Column A
KL8CB6S90DC505233
3GYT4MEF9DG331323
I need it to complete this for all data in Column A and Column B.
21045
21022
21054
20214
20114
I would like to know how to combine many cells in a column - sometimes 100's - into one cell separated by a comma without having to type each cell name using.
I am currently using some code to copy a list of visible cells in column J and paste them in the same row in column F.
For some reason this code takes a long time to run, but it does work. I have to call it twice in my routine, and it can take up to 3 minutes per piece.
I was thinking about a way to speed it up, and I thought would it be possible to loop through a set of only visible cells in J and paste those values via Offset to F?
That being said, I've tried to do this, but not having much luck.
Here is the code that I am using which takes so long.
Code: ....
In cell A2 I want to enter a day of the week and have other cells use that as a reference to return data to its cell. E.,g
View 9 Replies View RelatedI need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx
However, in addition to what the macro already does, it is possible to add another work sheet in the same work book that outputs the values in separate cells? It also has to output the data in order: for example, in the first work sheet the data is inputted at random and has spaces but the macro will have to remove all the blank cells and output them in order based on the first value in the test string, 1, 2, 3, 4, and then 5;
input:
blank 3-x Blank 1-y blank 2-z 1-k
output:
1-k 1-x 2-z 3-y
Is it possible to combine datas from over 200 cells (all cells are from the same row) in one cell? I have tried CONCATENATE function and e.g. =A1&B2&... but is there shorter formula for this?
View 4 Replies View RelatedI am attempting to use concatenate to combine two cells of data, but to only display the information if both cells contain information.
Currently using the following simple formula:
=concatenate(a1,a2)
However, I only want it to work if both a1 and a2 cells contain data. If only a1 contains information, but a2 is blank, I want it to calculate a blank cell.
Creating a macro that is a combination of other cell values. the cell order is listed below:
C57 = contains a unique number that will change from time to time eg. 1234
H57 = 1 (this will always be the value of 1)
N57 = contains text eg. AUDUSD
V57 = contains text eg. BS
AB57 = contains a number eg. 1.8954
AH57 = 0 (this will always be the value of 0)
AN57 = contains a number eg. 0.01
AS57 = contains a number eg. 1.7954
AZ57 = contains a number eg. 1.9954
BH57 = conatins either 1 or 0 eg. 1
the cell needs to contain the above examples like this :
BT57 =OpenPosition(1234,1,"AUDUSD","BS",1.8954/0,0,0.01,1.7954,1.9954,1)
This will be needed for a total of 14 rows (57, 59, 61, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83)
The cell with the results cannot have any cell references contained in the end results and must be formatted as above so that the add in program can read and pass on the information.
Column A has the following values:
au:asd
au:qwe
au:zxc
etc
I want to combine the text from each cell into a text string so that each cell's text is separated by a comma, thus:
au:asd,au:qwe,au:zxc,etc
I can do this with a formula,
=a1&","&a2&","&a3
but this may exceed the 255 character limit when the text string needs to be transferred to a query.
I have a document that has 3 colums.
Complete Name | Surname | First Name
The Complete Name is currently blank. The others just list the users Surname and First name. In the Complete name I need it to have Surname,Firstname - for example
Complete Name | Surname | First Name
Jordan,Michael Jordan Michael
Is there a Formula (Not Macro) that I can use to combine the Surname and First name cells to populate the Complete name cell with the surname,first name???
I want a VBA that searches for duplicates, triplicates, or more and combine the cellvalue that is next to the duplicates. Also, if it combines them, it should only use the last letter. I have a code that works partially, but I'm stuck.
For example, I have this list:
1
2014A
2
2014B
3
2014C
1
2014D
4
2014E
1
2014F
I want it to combine the A, D and F like this:
1
2014A
1
A/D/F
2
2014B
[Code] .......
I created the following script, but i can't get it to use the last letter. Also it creates a " / / " when the cells are empty.
I am using the code below to combine the rang of cell values into 1 cell. with this code I need to select the range of cells manually and run the code then repeat it on the next row manually.
What I need is automatically find the range from selected cell till last cell in the row and run the cod for this range then do the same on next row until last row of the sheet.
Code:
Sub JoinAndMerge()
Dim outputText As String[code]....
I am trying to combine the data in a row into one single cell.
For example,
B2= A1 & A2 & A3 .... until the end of the values in column A
I need this to be a macro so that when I enter values into column A manually and press the macro button, it will combine them into cell B2.
I have managed to retain leading zeros in a cell by formatting the cell and selecting Number and Custom and adding the maximum number of zeros I want to have in front of the number in the cell i.e. 000002.
I want to have another cell in the spread sheet which contains the value 35394000002 using the formula =A24&B24.
When I use this formula I get 353942. How can I retain these zeros?
I would like to know how to combine multiple cell value from each column to create a unique value. for example column A will have values (a,a,b,c,d,e,e,f,i,j) and B will have (1,2,1,1,3,4,5,5,6,7) and C has ( xxx,yyy,zzz,xxx,yyy,zzz,xxx,xxx,yyy,zzz).
i need to create a list of unique possible combination of data into column D.
I have placed below example and how to create a similar code and what functionality does this.
A
A Code
B
B Code
C
C Code
D
D Code
[code]...
cell A1 has " HH001 " (without "", there is space infront and behind the data),
cell B1 has "motor gear case",
what formula to put in cell C1 to get like this "HH001" (removed spaces in A1)
and D1 to get like this, "[HH001] motor gear case"
I'd like to compare 2 columns from different worksheets in the same workbook with a twist.
If any and all data from worksheet 2-column c matches any and all data from worksheet 1-column c, then go back to worksheet 2-column B on the same data matching row, copy the data from that cell and paste it into the same row of the data match in worksheet 1-column b and paste it.
I have a workbook of which has different times in columns D and E. What im trying to do is where the time difference between the columns is LESS than 5 mins I need that row deleting and cells shifting up.
I.E lets say D14 is 05.24 and E14 is 05.50. I need that line keeping but if E14 was lets say 05.27 then I need that line deleting and cells shifting up.
I need to be able to do this right down the workbook until the last entry.
I am looking to implement the "Compare Documents" function (available in Word 2010) in Excel 2010 through VBA programming between different text contained in two cells.
In Word this function works quite well (not perfectly), but it highlights in different ways which part has been deleted and which one has been added between an "original" document and a "revised" one.
For the nature of my job, I need to do this on a daily basis and I used to output text from Excel to Word, then compare the two text, and then copy it back to Excel.
Here comes the problem: since in Word the text is formatted (and what I'm looking for is formatted/highlighted text as output), I can't just paste it in Excel as it is: any editing, merging, splitting done on the pasted text (that eventually I need to do) makes the formatting disappear (above all with VBA functions, that can only output data and can't format it).
In other words: given two cells containing different text, I would like to be able to fill a third cell with text formatted accordingly to the TextDiff output between the two original cell.
E.g.:
INPUT:
Cells(1,1).Value2 = "my name is Andrea and I like jogging" (original)
Cells(1,2).Value2 = "my name is Giovanni and I like running" (revised)
OUTPUT:
Cells(1,3) wll contain: "my name is AndreaGiovanni and I like joggingrunning"
Obviously, since UDF doesn't allow formatting of cells, I would need to adjust the main Sub for each pair of document I have to revise, but that won't be the problem: what I need is the engine. It's been two years and a half that I do advanced VBA programming at work but it looks like I can't grasp the rationale behind the LCS algorithm.
Am trying for a code which will send mail to recipients mentioned in column A [to] Coulmn B [CC] & formatted range should be pasted as body of email lets say C:F. Each time formatted header should remain same is it will contain column heading. I have a code which sends mail to specified recipients mentioned in code .
Code:
Sub Send_Formatted_Range_Data() Dim oWorkSpace As Object, oUIDoc As Object Dim rnBody As Range Dim lnRetVal As Long Dim WB6 As Workbook Set WB6 = Application.Workbooks.Open("C:TESTDaily_BKG.XLS") Const stTo As String =
[Code]....
In cell B1 I have the number 1
In cell C1 I have the number 1031000
I know how to combine the cells in A1. I am getting a result of 1-1031000
What I would like to happen is that 1 becomes 001.
Ending result is 001-1031000
problem is that cells in B could be one, two or three digits.
On a small scale I could fix manually but i have over 15,000 rows to deal with
i m working on a spreadsheet and i need cell A+B=C..
Example
Cell A has a first name (John)
Cell B has a last name (Smith)
Cell C has last name then first name seperated with comma
Is it possible to combine three cells into one? Like for example, column A is the first name, column B is the middle name, column C is last name.
Is it possible put it on a format like this: Last, First M.
(middle name on column B is a name, not an initial.)
And can I make it only the first letters are capped. Last, First M. Or all small letters. last, first m.
I have a data set that I am generating from a SQL database then putting into excel format. In this spreadsheet, I have a one to many ratio. I want to combine all notes associated with the same applicant_id into one cell. I also, only want the first Received Date and first Entry date that comes across. Is this possible to set up a formula/macro to do this manually for me? Each day I generate this data set, the number of entries can vary. I provided a smaller set, but I'm dealing with hundreds of entries.
ReceivedDateapplicant_identry_datenotes_comments
12/27/13 0:0788695812/27/13 9:07Primary Call
12/27/13 0:0788695812/27/13 9:07Left Note
12/27/13 0:0788695812/27/13 9:08Left Voicemail
12/27/13 0:09886959NULL
12/27/13 0:13886960NULL
12/27/13 0:14886961NULL
[code].....
I want to combine two cells and add text. Then delete column D.
View 4 Replies View RelatedI am making a report template in excel. I have written a macro to format the report based on the contents of two other sheets in the work book.
I am attempting to combine two cells in separate sheets as a linked cell in a third sheet.
i.e. in sheet 3, A1 I want to combine the values held in sheets(1).range("a1") with sheets(2).("A1") as a link which will update as the parent cells values are changed.
The cell has to be a link of the other cells as their contents will change based on the report requirements.
How to combine cells with a similar value inside them into a single cell. Here is what my data looks like.
10'X14'{&}SNM8981-1014{&}16
2'6"X10'{&}SNM8981-2610{&}9
4'X6'{&}SNM8981-46{&}6
[Code]....
For example, I need to have every cell with SNM9012 to combine into the same cell. If I could figure this out it would save me hours vs pasting the similar lines into textmate and removing the enters.