Find Duplicates / Triplicates Or More And Combine Cell Value Of Next Cells
Aug 12, 2014
I want a VBA that searches for duplicates, triplicates, or more and combine the cellvalue that is next to the duplicates. Also, if it combines them, it should only use the last letter. I have a code that works partially, but I'm stuck.
For example, I have this list:
1
2014A
2
2014B
3
2014C
1
2014D
4
2014E
1
2014F
I want it to combine the A, D and F like this:
1
2014A
1
A/D/F
2
2014B
[Code] .......
I created the following script, but i can't get it to use the last letter. Also it creates a " / / " when the cells are empty.
I have a unique id in column A on a sheet with 20,000 contacts. I need a VBA script to loop through the worksheet and when it sees that there is a duplicate in column A, it needs to take the data from columns B, C, and D of that duplcate and copy them to the first blank cell at the end of the original record. Then it needs to delete the row that contained the duplicate that it just copied. I have searched and found parts of code that will do some of these, but I can't get anything to work, I don't know VB enough.
I am currently working on a project where i am given a sheet that typically has several hundred rows of data and not seemingly organized in any manner. This document has 6 columns, and my main focus is a range of dates (in MMM-YYYY form) from around early 2000 to now that can have duplicates. The dates(Column C), have corresponding Usages (Column D), and Costs (Column F) and I need to add these values together and remove the duplicate months so I only have one Usage and one cost Per month.
My spreadsheet has 6 Columns of data, and varying number of rows. Currently, since I receive the numbers in an unorganized fashion, my macro organizes the data into a table and then sorts the table be date so I have the oldest dates first and the duplicates are adjacent. There may be varying numbers of duplicates, though typically 0 to 4.
I'm a teacher and I'm trying to set up a monitoring system for students leaving and reentering the class. Some of them need very close monitoring and restricted privileges.
I've managed to get everything I need working except restricting the amounts of time they can leave. I've been experimenting with Validation lists but running into snags. The VBA code below seemed promising:
Private Sub Worksheet_Change(ByVal Target As Range) With WorksheetFunction If .CountIf(Range("C1:C" & Target.Row), Target.Value) > 1 And Target.Column = 3 Then MsgBox "You Have Already Left XXX Times" Target.Value = "" End If End With End Sub.......
I need to write a macro for find a value in all sheets in current workbook. The problem is put like this: I have to write a ID (for DVD archiving) in a column but testing that generated value is unique in entire workbook (I have multiple sheets, organized by movie genre). I can use find method and testing for value <> Nothing but it always said that the value is present (the current cell value); there is any method to omit selected cell value? I think "After:=" parameter can do this but I don't figure out how to handle with it...
Columns A, B, C and D contan a list of Names, I want to be able to in column E list all the items in A,B,C and D with out duplicates. How would I do this?
I run a report each week and would like to combine it with my Updated Members workbook and then remove duplicates.
Is there a way to add this new data (ActiveList.xlsx ) to the last row of data of my (UpdatedMembers.xlsx) Sheet and remove duplicates. (I would like the new additions to stay on the bottom of my original data in the UpdatedMembers sheet, so that I can add notes to their row)
I am still learning my way around excel and all of my attempt to do this have been unsuccessful. how to pull this off.
So I have the macro written, but I don't get the complete data that I am looking for. This is what I am trying to achieve
Here is an example of what I am trying to achieve. This is in the first sheet: Column A Column B Car Saw Dew Jacket Pen Key Saw Screen Hand Shoe Jacket Window Screen Sock Screen Mouse
Now I want this in the next sheet: Column A Column B Column C Column D Car Saw Screen Sock Car Saw Screen Mouse Dew Jacket Window Pen Key Saw Screen Sock Hand Shoe Jacket Window Screen Sock Screen Mouse
In my current macro, It displays most of what I am looking for, but not a duplicate ID if there is one. For example Screen, there are 2 IDs. My macro is only getting the first one and then skipping over the second ID. I would like it to where if there is a double or if it is there more than once that it gets all of the data.
Here is my macro.
[Code] ....
I will also attach the document of what I am looking for : Data 1.xlsx
I need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx
However, in addition to what the macro already does, it is possible to add another work sheet in the same work book that outputs the values in separate cells? It also has to output the data in order: for example, in the first work sheet the data is inputted at random and has spaces but the macro will have to remove all the blank cells and output them in order based on the first value in the test string, 1, 2, 3, 4, and then 5;
Creating a macro that is a combination of other cell values. the cell order is listed below:
C57 = contains a unique number that will change from time to time eg. 1234 H57 = 1 (this will always be the value of 1) N57 = contains text eg. AUDUSD V57 = contains text eg. BS AB57 = contains a number eg. 1.8954 AH57 = 0 (this will always be the value of 0) AN57 = contains a number eg. 0.01 AS57 = contains a number eg. 1.7954 AZ57 = contains a number eg. 1.9954 BH57 = conatins either 1 or 0 eg. 1
the cell needs to contain the above examples like this : BT57 =OpenPosition(1234,1,"AUDUSD","BS",1.8954/0,0,0.01,1.7954,1.9954,1)
This will be needed for a total of 14 rows (57, 59, 61, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83)
The cell with the results cannot have any cell references contained in the end results and must be formatted as above so that the add in program can read and pass on the information.
The Complete Name is currently blank. The others just list the users Surname and First name. In the Complete name I need it to have Surname,Firstname - for example
Complete Name | Surname | First Name Jordan,Michael Jordan Michael
Is there a Formula (Not Macro) that I can use to combine the Surname and First name cells to populate the Complete name cell with the surname,first name???
I'm trying to use this Find Method and combine it with a countif or loop. Something that will count a number of occurences of a unique type of character. I'm looking to find all "F" characters in Bold, Italic and Size 16. Here's my find code that I'm trying to use. I can get it to work by itself but not along with a countif or loop.
Sub count_4() Dim r As Range Set r = Range("A1:A6") With Application.FindFormat.Font .Bold = True .Italic = True .Size = 16 End With r.Find(What:="F", LookIn:=xlValues, LookAt:=xlWhole, SearchOrder:=xlByRows, _ SearchDirection:=xlNext, searchformat:=True, MatchCase:=True).Activate End Sub
I have 5 columns, each with some data. On the 6th column I need to combine the data from all 5 columns into column 6 to be as: Data in A2-Data in B2-Data in C2-Data in D2-Data in E2. With one exception. column D is the date in this format 27-Aug-09. I need the date to be modified on the fly from 27-Aug-09 to be 270809 which will be the info in D2. See example attached.
I would like to know how to combine many cells in a column - sometimes 100's - into one cell separated by a comma without having to type each cell name using.
I am using the code below to combine the rang of cell values into 1 cell. with this code I need to select the range of cells manually and run the code then repeat it on the next row manually.
What I need is automatically find the range from selected cell till last cell in the row and run the cod for this range then do the same on next row until last row of the sheet.
Code: Sub JoinAndMerge() Dim outputText As String[code]....
I have managed to retain leading zeros in a cell by formatting the cell and selecting Number and Custom and adding the maximum number of zeros I want to have in front of the number in the cell i.e. 000002.
I want to have another cell in the spread sheet which contains the value 35394000002 using the formula =A24&B24.
When I use this formula I get 353942. How can I retain these zeros?
I would like to know how to combine multiple cell value from each column to create a unique value. for example column A will have values (a,a,b,c,d,e,e,f,i,j) and B will have (1,2,1,1,3,4,5,5,6,7) and C has ( xxx,yyy,zzz,xxx,yyy,zzz,xxx,xxx,yyy,zzz).
i need to create a list of unique possible combination of data into column D.
I have placed below example and how to create a similar code and what functionality does this.
Is there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.
formula that would find a text data point (comma) and round the number to 2 decimal places that is located prior to the text data point (comma) within a string of data.
see examples below in Column A and the intended results in Column B.
I have a sheet with numbers in descending orders with duplicate in one row and their respective value in 22nd row. I want to find the2nd occurrence of that value. (max. occurrence2 is 2)
I have a number of tables that may or may not have multiple dupliate enters, I am trying to indentify by name and by date. None of the tables are in the same format, which makes it ever harder for me, but all I want is a return of "duplicate" or "original", this will allow me to have acloser look at the duplicates.
I have excel sheets that will show a customer account number an ammount they need to pay and there full name and a date when the payment is expected, is there a formula that will find duplicates, if the same entry has been put in twice
