Creating a macro that is a combination of other cell values. the cell order is listed below:
C57 = contains a unique number that will change from time to time eg. 1234
H57 = 1 (this will always be the value of 1)
N57 = contains text eg. AUDUSD
V57 = contains text eg. BS
AB57 = contains a number eg. 1.8954
AH57 = 0 (this will always be the value of 0)
AN57 = contains a number eg. 0.01
AS57 = contains a number eg. 1.7954
AZ57 = contains a number eg. 1.9954
BH57 = conatins either 1 or 0 eg. 1
the cell needs to contain the above examples like this :
BT57 =OpenPosition(1234,1,"AUDUSD","BS",1.8954/0,0,0.01,1.7954,1.9954,1)
This will be needed for a total of 14 rows (57, 59, 61, 63, 65, 67, 69, 71, 73, 75, 77, 79, 81, 83)
The cell with the results cannot have any cell references contained in the end results and must be formatted as above so that the add in program can read and pass on the information.
I need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx
However, in addition to what the macro already does, it is possible to add another work sheet in the same work book that outputs the values in separate cells? It also has to output the data in order: for example, in the first work sheet the data is inputted at random and has spaces but the macro will have to remove all the blank cells and output them in order based on the first value in the test string, 1, 2, 3, 4, and then 5;
I have 2 cells that dump data in a column format. I need to combine these two cells with a ' after the data in the column. This macro will loop down until both column J and K are empty, I need a Macro that 1. Will combine both cells 2. Data will be value format not formula 3. Macro Will run as soon as workbook is opened
Ex. F J K 1 Prop MD MD Objective 2 1' Test Data 1 Test Data 3 235' next data 235 next data
The Complete Name is currently blank. The others just list the users Surname and First name. In the Complete name I need it to have Surname,Firstname - for example
Complete Name | Surname | First Name Jordan,Michael Jordan Michael
Is there a Formula (Not Macro) that I can use to combine the Surname and First name cells to populate the Complete name cell with the surname,first name???
I have 5 columns, each with some data. On the 6th column I need to combine the data from all 5 columns into column 6 to be as: Data in A2-Data in B2-Data in C2-Data in D2-Data in E2. With one exception. column D is the date in this format 27-Aug-09. I need the date to be modified on the fly from 27-Aug-09 to be 270809 which will be the info in D2. See example attached.
I would like to know how to combine many cells in a column - sometimes 100's - into one cell separated by a comma without having to type each cell name using.
I want a VBA that searches for duplicates, triplicates, or more and combine the cellvalue that is next to the duplicates. Also, if it combines them, it should only use the last letter. I have a code that works partially, but I'm stuck.
For example, I have this list:
1 2014A
2 2014B
3 2014C
1 2014D
4 2014E
1 2014F
I want it to combine the A, D and F like this:
1 2014A
1 A/D/F
2 2014B
[Code] .......
I created the following script, but i can't get it to use the last letter. Also it creates a " / / " when the cells are empty.
I am using the code below to combine the rang of cell values into 1 cell. with this code I need to select the range of cells manually and run the code then repeat it on the next row manually.
What I need is automatically find the range from selected cell till last cell in the row and run the cod for this range then do the same on next row until last row of the sheet.
Code: Sub JoinAndMerge() Dim outputText As String[code]....
I have managed to retain leading zeros in a cell by formatting the cell and selecting Number and Custom and adding the maximum number of zeros I want to have in front of the number in the cell i.e. 000002.
I want to have another cell in the spread sheet which contains the value 35394000002 using the formula =A24&B24.
When I use this formula I get 353942. How can I retain these zeros?
I would like to know how to combine multiple cell value from each column to create a unique value. for example column A will have values (a,a,b,c,d,e,e,f,i,j) and B will have (1,2,1,1,3,4,5,5,6,7) and C has ( xxx,yyy,zzz,xxx,yyy,zzz,xxx,xxx,yyy,zzz).
i need to create a list of unique possible combination of data into column D.
I have placed below example and how to create a similar code and what functionality does this.
I have a data set that I am generating from a SQL database then putting into excel format. In this spreadsheet, I have a one to many ratio. I want to combine all notes associated with the same applicant_id into one cell. I also, only want the first Received Date and first Entry date that comes across. Is this possible to set up a formula/macro to do this manually for me? Each day I generate this data set, the number of entries can vary. I provided a smaller set, but I'm dealing with hundreds of entries.
I am making a report template in excel. I have written a macro to format the report based on the contents of two other sheets in the work book.
I am attempting to combine two cells in separate sheets as a linked cell in a third sheet.
i.e. in sheet 3, A1 I want to combine the values held in sheets(1).range("a1") with sheets(2).("A1") as a link which will update as the parent cells values are changed.
The cell has to be a link of the other cells as their contents will change based on the report requirements.
For example, I need to have every cell with SNM9012 to combine into the same cell. If I could figure this out it would save me hours vs pasting the similar lines into textmate and removing the enters.
I need to search and combine cells based on a specific set name. I would be just as comfortable if it automatically found similar names without me entering the names I would like combined. This is not required though.
EX: Search for John in Column A Find 2 rows with John Add each column from row with name John together individually
Name -----Number 1----- Number 2 John------- 6 --------------5 David-------55 ------------65
Then I'll be recalculating fields and repeating the macro for another name (this part I can handle). The current quick macro I made just combines highlighted cells, which is OK but time consuming. I took VB in highschool, but remember none of it!
am trying to code a loop but I have no idea where to start.
With the help of you guys I have already got some code from a previous thread which gives me a list of hierarchical data now I want to be able to loop through this and actually have the 'parent' next to it.
I've been Google-ing for the last 45 minutes and tried to combine them myself, but I'm afraid of breaking it.
I believe the second code was taken from the MrExcel site, I don't remember.
CODE 1:
// Track Changes; updates any/all changed cells with a comment identifying the author, date and change that was made //
Option Explicit Public preValue As Variant Private Sub Worksheet_Change(ByVal Target As Range) If Target.Count > 1 Then Exit Sub Select Case Target.Column Case Is = 2, 4, 6 Target.ClearComments Target.AddComment.Text Text:="Previous Value was " & preValue & Chr(10) & "Revised "
CODE 2:
// Whenever a specific range of cells are updated, the adjacent cells update with a timestamp //
Private Sub Worksheet_Change(ByVal Target As Excel.Range) With Target If .Count > 1 Then Exit Sub If Not Intersect(Range("F3:F1000"), .Cells) Is Nothing Then Application.EnableEvents = False With .Offset(0, 1) .Value = Now End With End If
I have a list of transactions on accounts that have the account name multiple times. I want a count of just those account names but without the copies for the different transactions. I have like 5 entries (transactions) on say Bob Smith's Towing I need it to combine all five entries into one or delete all but one so I have a true count of how many accounts I have.
Is it possible to combine datas from over 200 cells (all cells are from the same row) in one cell? I have tried CONCATENATE function and e.g. =A1&B2&... but is there shorter formula for this?
