Im combing 2 cells into 1 but using a fraction..
I created 2 examples of what im trying to do..
Example.
A1 = 22
A2 = 11 3/4
=A1&"'-"&TEXT(A2,"# ?/?")&"''"
[b]22'-11 3/4"[b]
but when A2 = 11
i get this..
22'-11___''
on excel it has some space between the 11 and '' but i cant show that here..
i would like the '' to be next to the 11. is there any way to do that?
In column A i have values that may repeat throughout Column A, then next to the value in ColB, there is a sequence number 1,2, 3 for each of the same value in ColA. Then the Text in ColC that i need.
What i Need is to be able to search ColA, Then get the correct Sequence number from ColB, and place the contents in ColC into ColD or into a new worksheet if necessary.
if it is possible to do the following with the help of the formulas alone. I have a list of events which START and END at different times. Some of them start when the other events are still in progress (their end date has not been reached yet). I need a way to combine the results of the events whose times overlap. The results of the overlapping events should be multiplied and stored as a single event.
The file:
[url]
I need to combine these 6 spreadsheets into one single spreadsheet. It won't seem to allow me to paste it.
It needs to begin with 2012 and count down.
2011.xls2010.xls2009.xls2008.xls2007.xls
Was looking into this, but basically i have a repetitive task of copying contents from various columns, and pasting them into 1 column.
1 right after the other. I figured there could be a way for a macro to copy contents from multiple columns and paste them into 1 column.
I have including 2 files, 1 from the start of the file, and 1 how it should be so it will have clarify what i am trying to do.
So basically if you open book1 , i have factory install tabs,
I need the columns contents from the first tab the (5k-20k) starting with Column B, then E, then H, and so on( Every 3rd column starting with B ) to be copied and pasted in Column A of the (Factory Install Tab) ( last tab ).
If you open the 2nd file this will be clearly understood. In the second file in the factory install tab you will notice i did the first 2. I highlighted each starting part in yellow just so its easier to see. SO in column A you should have all the contents in the 5k-20k tab ( starting with b every 3rd ), pasted in column A 1 after the other.
The next tab is the 30k tab, i need all of the columns contents copied starting with B ( every 3rd again ), copied in Column C of the Factory Install tab. Basically every tab's contents needs to have its own column in the Factory Install tab.
If anyone could help that would be great, this is a very time consuming process manually, and it would seem like a macro could be made to easily copy contents.
How do I get a fraction to show as a fraction rather than decimal in the formula bar by formatting the cell as text.
For ex:
I have "-3/4" in a cell formated as "TEXT" I expect it to show "-3/4" in formula bar but it shows "-0.75".
I have copied from a website some data regarding steel weights, for example 1/16 .005 copies to one cell, when I try text to columns to separate the whole column and move the decimal .005 to the next column the 1/16 changes to 41290. The data copies quite well as HTML into Excel except for where a lone fraction value becomes a 5 digit number beginning with 41***. I can find no conversion calculator on the web to determine what's happening.
View 4 Replies View RelatedCould someone please tell me what is wrong with this formula. I have been looking at it for so long, I can't even concentrate .....
View 9 Replies View RelatedCan anyone help me with a code for converting decimal number to a nearest 1/16 th fraction. For example converting number 2.1875 to 2 3/16 and so on...Also if it is 2.5 it should display 2 1/2...
View 14 Replies View RelatedI write up job cards that require measurements in fraction form. Usually whenever i want to round off a figure , say 10/16, to 5/8, i right click on the figure and format cell it. However, this can be quite time consuming if there are multiple cells and are of a different breakdown.
What i would like to know if there's a shortcut way where when the 10/16 is in the cell, it automatically rounds off to the nearest fraction.
I am wanting to get a function that can get the number from a fractions left side only . 13/14 2/1 1/5 etc
Col A varies in lenght so using a right function doesnt always work .
The result i need is in col B .
Sheet1 AB1DataResult2Fred Swchensoncenson [R63] 57 (13) 13/14 $39.40133Bob Bill [R54] 65 (7) 2/1 $3.3024Patrick Patrick [R56] 65->63.5 (10) 1/5 $12.6015Le Le [R56] 65 (2) 6/6 $3.4066John Ringopeterpaulandmaryslambgoingupahill [R58] 65 (2) 1/1 $2.8017Gold Silverbronzmetalmedals [R61] 58.5 (5) 16/15 $33.90168Mr Mycardontrun [R59] 68 (4) 1/1 $6.701
I am joining two columns of data. first col. has size in fraction format: 7 3/8
second column has text string:
HABITAT CINCY POD HAT ERA BLK/RD
Concatenate= HABITAT CINCY POD HAT ERA BLK/RD 7.375
Changing fraction to decimal, needs to remain fraction.
I have played w/ the formatting to make Number w/ zero decimal places and then selected Fraction, but no luck there.
I am working on a simple calculater, what I want to do is figure sq. inches my problem is every thing I try the decimals won't calculate right,, this is a example of what I want to do
8.25x10.75= 81 sq"
Is there any way of formatting a cell to show a percentage with a fraction? For example, I'd like to show: 3 1/3%, 1 2/3%, 2 1/2%, etc.
I'm showing data to a client who will pull out his calculator and add up the decimals on his calculator and be unhappy that the numbers don't add up to 100%.
I can force the output by using TEXT() or multiple columns, but ideally, I'd like a custom format if possible.
I am trying to round a number down to the nearest 1/4". For example;
Round Down 8.80" to 8.75".
Is there any combination of Rounddown and Mround that will accomplish this?
I am trying to paste in a decimal equivalent chart, loacted here:
http://www.advancedtool.com/prod02111.asp
which basically has a mixture of whole numbers and fractions, and how they equate in decimals.
When I paste this in, all the fractions turn into dates. So for instance 1/64 turns into Jan/64, and 1/32 is Jan/32. Now, I could go in and change each one, but I would like to know how to do this with cell format on the entire sheet....
I have tried to change the cell formats to "general" or "text" and of course fraction, but in this case, I have to go in and do each fraction cell individually. Now maybe I am being too lazy, and in the time it took me to look up my login information, and type this out, I likely could have re-done the worksheet, each cell individually, but I would like to know the way to fix this automatically.
I have created a "heat map" in VBA that takes fractional values and "ranks" them in 10 equal bands, then assigns a colour to each band. (Hopefully that made sense to you VBA experts out there)
However, I now want to look at the numerators of these fractions, rank these, and do something like "if the numerator is > x then proceed, else exit. Is there a way to reference these numerators directly? If so, is there a way to store them in some sort of array then take the max value too?
I've tried searching this and it seems like this should be a simple answer, but is there any way I can reference the numerator of a fraction in Excel? These cells will contain formulae; so they'll be E5/C5 for example.
I simply cannot insert a one eighth symbol in my spreadsheet.. I used to be able to see this in the Insert Symbols grib but now all I get are lots of question market.. if I use
selection.value = ChrW(8569)
the symbol does appear until I select the cell and press return, after which point it turns into a question mark.. I'm sure its something to do with my settings but I can't figure out what.. this is really important for me.
I know that if I enter =3/4 in a cell it will give me .75 but is there is formula to convert fractions into decimals or is this the best way to do it? I was also wondering if there is some way to convert the decimal amount to a fraction
for measurement conversions I know that
=B3*25.4 will convert a decimal to mm and so will the formula =CONVERT(E4,"in","mm")
and to convert mm to a decimal a few formula that work are
=CONVERT(H3,"mm","in")
=MROUND(H4/25.4, 1/8)
=H5/25.4
=INT(H6/25.39999918*8)/8
But is there a way to convert a fraction to the decimal and is there a way to convert mm to a fraction instead of the decimal equivalent of the fraction?
or maybe a formula to convert mm to inches but instead of the result being in decimal format it would be in fraction format?
I have attached my excel sheet. I have continuous fraction numbers in every attribute value. How can i write vba code for replacing continuous fraction numbers in on row
Attribute name1 Attribute Value1
materials1 1/2 IN ID, 2/3 IN LG, 4/5 IN OD 1/4 IN THK
materials2 1/2 IN ID, 2/3 IN LG, 4/5 IN OD
materials3 1/2 IN ID, 2/3 IN LG
example: 1/2 IN ID, 2/3 IN LG, 4/5 IN OD 1/4 IN THK in a single row
I have TOOL OUT sheet
ModelNumberAttributeValue Replace Value
1materials2/4 IN LG, 3/4 IN ID, 5/9 IN OD,1/15 IN THK
2materials1/2 IN LG, 2/9 IN
3materials4/15 IN
4materials5/18 IN
5materials4/19 IN
6materials2/4 IN
7materials1/2 IN
8materials4/15 IN
9materials5/18 IN
10materials4/19 IN LG, 9/8 IN
11materials2/4 IN LG, 3/4 IN ID, 5/9 IN OD,1/15 IN THK
I want this to converted in (Replace value column)
Example 0.5 IN LG, 0.75 IN ID, 0.55 IN OD,0.06 IB
Tool_to_replace_Fraction_to_decimal_v1_MrShorty.xlsm
Inmates can apply for pre-release when they have half their minimum sentence served. For example 2 years 6 months. They would have to serve 1 year 3 months.
I use this formula
=DATE(YEAR(A1)-A5,MONTH(A1)-B5,DAY(A1)-B6)
Where A1 is half the years, B5 is half the months, and B6 is half the days. The problem is when an inmate is sentenced to a minimum of 3 years and 3 months. The latter formula will not calculate 1.5 years or 1.5 months. It rounds up. What I would like to do is covert the 1.5 years to months and the 1.5 months to days.
Below is a sample. I was given a spreadsheet and it contains fractions formatted as General. I need to do a calculation based on the fractions. Example there is a number in A1 lets say 3 and a fraction formatted as general in a2 1/216 and I need to multiply A1 * A2 but obviously I get a value error. If I go to another sheet and format the cell as a fraction then the multiplication works. My spreadsheet is full of the general formatted fractions.
A1321/2163 4 5 60.0138888897 8#VALUE!Spreadsheet FormulasCellFormulaA6=(A1*1/216)A8=A1*A2
I have row 2 formatted as a fraction and row 1 formatted as percentage.
I am looking for way to return the percentage of row 2 in row 1. I.E. If i have 3/4 in a2, I want it to return 75% in a1. I have figured a formula to return a percentage for numbers with only 1 item to the left of the division sign (i.e., 3/4). That correctly returns 75%. I am struggling with working a formula to also return larger numbers (e.g. 12/15).
I'm using excel 2010......
i have a combo boxes populated with fractions 1/16, 1/8, 3/16, 1/4 etc up to 15/16.
i just want to output the chosen fraction to a textbox as a decimal.
This is done in a userform, not in a cell.
Is there any way to display one-third 1/3 in a Userform label control?
View 9 Replies View RelatedI have a cell with the following text in it that is being imported from a website "5/1 Smith T win". What i want to do is extract the "5/1" part without it being in the format of a date. I want it to be extracted in the format "?/???". I have entered the following formula to extract the "5/1"
View 2 Replies View RelatedI have a file that has been produced using Statistica software. The file is supposed to have around one million rows, and when exported to Excel the file is about 30 MB. When I open the .xlsx file in Excel 2010 only two pages of data appear. The rows also have weird numbering. The first square of the A column is A1. The second is A3833, the third is A6789, then A8161, then A8162, then A8163, then A8164, then A18070.
The scroll button to the left of the screen is long, as if the document was only two pages long. When the scroll button is click-and-dragged a small beige square appears with a row number. This small square seems to be aware that not all rows are shown as it shows many more rows than are visible to me.
I have a workbook that uses the values that a user had entered into 3 cells to calculate multiple other charts/diagrams on multiple sheets within the workbook. Each sheet would show what the user had entered in the 3 cells to allow them to see what is being used to calculate each table. Is it possible to link these cells so that the user can change the 3 values without having to go back to where he originally entered the 3 values?
For example, a user has entered in 3 values in Sheet 1. A formula in Sheet 2 displays what is entered by the user and uses these calls in Sheet 2 for calculations. When the user wants to change the three values, he would have to navigate to Sheet 1 and enter in the new values to have the workbook recalculate all the tables. Is there a way to link the three cells from Sheet 1 and Sheet 2 so when the user is on Sheet 2, he has the opportunity to change the values on the current Sheet without having to navigate to Sheet 1 to do so?
I wish to copy a merged cell (3 cells) based on if only 1 of 3 cells to the right contain "X". if the top cell does not contain "X" than the merged cell is not copied. Also, is therea more elegant to copy 3 columns at a time rather than do one at a time as my code shows:
Sub CopyICUCAPU()
'
' CopyICUCAPU Macro
'
Dim i As Integer
[Code].....
I did my search, but cant find and knows what key search to look/type for...
If i have data A1 through A10, such as 1 1 2 2 2 2 3 3 3 3
How can i get column B1 through B3 as 1 2 3 ?