Fraction Char / Display One-third In Userform Label Control?
Nov 26, 2013Is there any way to display one-third 1/3 in a Userform label control?
View 9 RepliesIs there any way to display one-third 1/3 in a Userform label control?
View 9 Repliesanyone know how to display data using label on userform? I tried using offset but it doesnt work. The data I want to display is in column G. How do i go about that?
View 13 Replies View RelatedI would like to ask if there is a possible way for a Label to display information that are based on multiple textboxes? All the information are based on the textboxes and listboxes that are in the userform and will be displayed on the Label (label16)
userform.png
**Cross reference link: [URL]
I have a cell that is acutally a concatination of several other cells. The formula is something like this....
=A1 & B1 & A1 & C1 & A1 & D1 & A1
Cell A1 contains the formula =char(13). This forces a line break between each data element.
My problem is that on some peoples machines the cell displays with a square at the end. I'm not sure why it does this only on some machines. Is there a better way to do this or is there a way to suppress the square?
I have a userform in Excel and I would like to have a label calculate from the sum of 3 different labels. I have tried a few ways of which none worked.
This is what I currently have. This returns $0.00 in the label value but does not calculate...
Code:
Public Sub TotalCACost()
If TextBox12.Value > "" Then
Label685.Caption = ""
[Code]....
The reason that I have it as a public sub is that I am calling it to Private Sub extBox12_Change() as well as a couple of other textboxes so that when ever TextBox12 or the other textBoxes gets changed, the value will recalculate. The "other textBoxes" change the values of label443, 444, 445, 385, 386, 387 etc..
I'm trying to validate a string that can have only dots and numbers, but there can't be two dots in a row. String has to begin with a number and end to a dot
So these are ok
1.1.1.1.1.1.
and
2.452443.1.5.21.5.42131.
but
1..1.
and
1.1.t.
and
.1.1.
and
1.1
are not ok.
I would like to format a Label, such that it displays numbers with only 2 or 3 figures after the dot. Apparently it's not obvious for Labels.
View 2 Replies View RelatedI have an excel application that I'm developing that is going to be used by two different departments. On one side everything will pretty much be userforms. The sheets they the data I need to pull in for them is on sheets that I have such that their visibilty is equal too xlveryhidden. I'm trying to change the captions on labels using the data on the veryhidden sheets. Something like this.
'frmCurrentProposal is a userform
'lbGroupName and lbGroupNum are both labels that should vary
frmCurrentProposal.Show
frmCurrentProposal.lbGroupName.Caption = Sheet2. Range("B2").Value
frmCurrentProposal.lbGroupNum.Caption = "Group # " & Sheet2.Range("B3").Value
The labels are not changing their values.
I have a Pivot Table set up that is summarizing some work responsibilities, and within the data table that the Pivot is referencing, there is a field for a Hyperlink that will take the user to the location on the network where the work has been saved. I am not sure if it is possible, but I want to have that Hyperlink work in the Pivot Table as well, and not just display the text for the link.
View 1 Replies View RelatedI would like to display the latest data label value for a data series So if I update my table for period 2 the chart should update to display only this value. Then period 3 and so on Workbook attached
View 3 Replies View RelatedWhen you hold your mouse over a bubble on a bubble chart, it typically displays the x value, y value and size value. Is there any way to add other captions to display? For example, if my chart is based on sales data and I'm plotting a point based on ease of probability (x axis) and dollar value (y value)....I'd also like to see the initials of the salesperson assigned to that prospect when I hover over the bubble?
View 2 Replies View RelatedI am trying to display the result of a custom VBA function as a label on a userform. The function is called and takes arguments from three text boxes on the userform. I attached it to the exit parameter. (This may be part of the problem; I'm not sure).
There seem to be two problems, first all the text boxes don't always contain data, but because the arguments are not optional, I get a type mismatch error when the code runs (I tried switching some of them to optional, but it didn't help as you can see from my 'commented code).
The other problem is that even when all the arguments seem to be met (i.e. the text boxes all have data), I still get a compile error that the argument is not optional. This only happens if I try and pass the result to some aspect of the userform. As you can see from the last coded line in the custom function, if I assign it to a range on the worksheet, it functions fine.
Private Sub txtStartDate_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim StartDate As Date
Dim EndDate As Date
If IsDate(Me.txtStartDate.Value) Then
StartDate = Me.txtStartDate.Value
Me.txtStartDate.Value = Format(StartDate, "m/d/yyyy")
Else: MsgBox "Please enter a date"
End If.............
This is weird - if you delete a sheet that contained a control then
a. showing a modeless userform resluts in a userofrm that goes invisible at subroutine End
b. public variables lose their value
These things do not happen if the sheet did not contain a control. Attached is an example file - put the inputfile.xls in your default file location (or add a path in the code) then open the ProblemDemo.xls and run the main macro to see it fal - isthis another Excelbug I've found?
I have several non-modal userforms in my App, some of them have date-fields that require manual entry typing of dd/mm/yy etc (No single userform has more than one date-box in it, this I think may be pivotally useful)
Now the Userform 'Calendar' that is built on the class of the same (cCalendar) name, has the write value line 'ActiveCell.value = theCal.value'
I'm looking to change this to refer to the correct userform.Textbox value, depending on which form is open.
I would imagine I could simply have a global string, whose value is set (or re-set) whenever a Userform is initialized (some sort of 'ActiveUF.value = Me.Name), where I get lost is referring to the components by name, so as to have a case statement by where I go:
Code:
Private Sub theCal_AfterUpdate()
Select Case ActiveUF
Case "AddForm"
application.vbe.components("AddForm").controls("AddFormDatePicker").value = theCal.value
Case "EditForm"
'.... etc
end select
end sub
better way of doing this (instead of passing around the userform name as a variable) - or proper syntax for referring to controls outside of the 'active' userform (but an open userform nonetheless)?
Every time I have to do this particular thing with userforms, I completely forget how, and the object browser always leads me on an infinite loop of Application.vbe.activevbproject.vbcomponents.vbe.active....
PS - there may be one slight complication to the process - one of the forms, has a 2-tab page in it, each page having similar (but named differently) fields. So I may need to be able to throw in 'Activepage' or whatnot
I am trying the below code but I get an Method of Object failed!
Private Sub Label4_Click()
ActiveWorkbook.FollowHyperlink Address:="http://www.rmdmo.co.uk/"
End Sub
I am trying to format a label as a number with two decimals. I have searched this and other forums and see code such as:
Label18.Caption=Format(sheet1.Range("A!").Value, "0.00")
It always gives me an error: "Wrong number of arguements or invalid property assignment"
The word "Format" is highlighted.
I have tried putting the code in userform Initialize and also Activate. I am using Excel 2002.
I have a userform with seven textboxes. I want to sum up the values in those textboxes and print the result in a label caption on the form. The label which displays the total needs to be updated every time anyone adjusts the textboxes. Because I need to have it update like this, I need to have a separate (short) procedure that I can call (when a textbox is adjusted) to sum up the textboxes once again, and place that sum in the label caption.
I have encountered a weird problem. When I update the label caption during the USERFORM ACTIVATE procedure, everything works fine and dandy, even though the summing is taking place in a separate procedure. But I cannot realistically run this entire activation procedure every time the user changes the number in a textbox. (Or, I should say, it just seems like sloppy programming to me.) I really need to update the label caption in a separate smaller procedure. However, when I change my code so that the label caption gets updated during the smaller procedure (which performs the summing operation), the caption remains blank.
Is it possible to create a translucent background on a userform label?
View 4 Replies View RelatedI am using a userfrom in my sheet. i want to link label2 = sheets("OF $").Range("D6").value
I mean I want to lable2 = cell value as link
I have a userform that shows while a macro is running. The userform just informs the user that the macro is still in progress. However, I can get the userform to show and the macro to run, but the label on the userform won't appear. Here is the code I have:
Code:
Private Sub Userform_Activate()
Application.ScreenUpdating = False
Sheets("Data").Select
[Code].....
I am trying to make a Progress bar with a statment using a Userform with a label saying Please wait. I call the form using UserForm1.Show vbModeless.The form shows and functions as needed but the label with the caption please wait is not visible. how to get the label to show?
View 1 Replies View RelatedI present a form (a calendar) twice in my routine to the user but I want to change the Caption of the Label on each pass?
e.g.
The first time it's displayed: 'Please select a start date' (calendar closes & goes off and does stuff)
... and on the 2nd display: 'Please select an end date'.
Is it possible to load an image into a label and have the caption for the label be visible too? I've only been successful having one or the other display but not both.
View 2 Replies View RelatedI want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
I tried the texbox & using the the controlsource from the properties window, this was only good for one result. for the next result the textbox won't change its value.
As i want this for display purpose only can i use the label for the above problem
Userform Activate Label in correct format. I have the following code in a userform activate
View 2 Replies View RelatedIs there any way to change a label in a user form based on the value of a cell?
I'm trying to link a series of labels to a small range of cells that change based on a data-validation drop box.
I've tried finding info, but I can't seem to find the right place.
The code I've tried so far without result is:
Code:
Private Sub Label3_Click()
Me.Label13.Caption = ActiveSheet.Range("BQ15")
End Sub
I create a series of labels and text boxes at runtime.
Code:
for x = 1 to 10
labelName = "label" & x
Set cControlLabel = Me.frameScrollable.Controls.Add("Forms.Label.1", labelName, True)
next x
How can I assign an on_click event to these? I have seen some rather complicated suggestions such as creating code for each possible object, but there could possibly be hundreds of labels created. It would be nice to be able to call the same macro from each label click, and then take action based on the .caption property of the label.
I have a label in a userform which is picking up data from sheet1.range("a1") and i would like it to show along the left side of the userform so rotated at 90 degrees.
I do not have to use a label but I do need the data to be shown at 90 degrees.
Is it possible to vertically center the text in a userform label? For example: I have a label that's 22px high, but the text is only 10pt -- at the moment it just hangs out at the top of label looking bad.... I'd like to place it the middle if possible.
View 2 Replies View RelatedI want a floating userform (showmodel = false) to display the results of a cell.
On excell spreadsheet I can assign a cell value to an object/shape, as the cell value changes so does the display on the object automatically.
I want the same results on a userform.
As i want this for display purpose only can i use the label caption for the above question?